Name that bolt/nut/screw size - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dale99 · 04-08-2014, 07:55 AM

I've been having problems finding fastener information while rebuilding my ride. I thought it would nice to have all this information in one thread. Since this is the blazer/jimmy section, lets try and get mainly info for them, but info that's the same for trucks is welcome.

So, what the bolt is for, size-thread pitch, type head. Qty needed may be helpful as well.

Double wall top
visor bolt, 5/16-18, 2.375 long with 1.375 shoulder, hex, qty 2
bed bolts, 5/16-18, .875 or 1.00 long, w/washer, hex, qty 10
top to bracket, 5/16-18, .625 long, w/lock washer, panhead phillips #3, qty 4
frame to bracket, 5/16-18, 1.00 long, w/small washer, hex, qty 2
rear plate, 5/16-18, 1.00 long, hex, qty 6

Single wall top
Bed bolts, 3/8-??, ?? long

Visor bolts, 5/16-18, 1.00 long, oval head with custom .50 dia head, #2 phillips (cant find these anywhere)
gasket to top of a-post, ??? qty 6
door sill plate screws, #8x1.00 panhead #2, qty 8
Pass Seat to floor, 5/16-??, 1.00 long, qty 6
Drivers seat to floor, 5/16-??,
Rear seat to floor front bkt, ??, ??, Qty 2
Rear seat to floor rear bkt, ??, ??, Qty 4??

**jaros44sr** · 04-08-2014, 11:00 AM

I have to pull my 1/2 top off to get to the windshield bolts, might take awhile as im elbow deep in my build. Ill try to get to it Saturday

Dale99 · 04-08-2014, 01:46 PM

Quote:

Originally Posted by Dale99

Single wall top
Bed bolts, 3/8-16, 1.50 long

since I cant edit the original post

nicosorange · 04-08-2014, 01:55 PM

ADD:
Rear Interior Spare Tire rack to floor? qty 4,???, ???

Dale99 · 04-08-2014, 02:12 PM

If you know it, add it. Mine has the holes, but no rack or bolts.

timski69gmc · 04-08-2014, 03:58 PM

Subscribing. I need all the rear seat bolts as well.

Dale99 · 04-08-2014, 05:47 PM

Quote:

Originally Posted by nicosorange

ADD:
Rear Interior Spare Tire rack to floor? qty 4,???, ???

7/16-20, 1.00 long, w/star washer, hex head, qty4

Dale99 · 04-08-2014, 06:00 PM

Quote:

Originally Posted by Dale99

Rear seat to floor front bkt, 7/16-20, 1.25, hex head w/ star washer, Qty 2
Rear seat to floor rear bkt, 1/2-13, 1.75lg, .50 shoulder, hex head w/flat washer, Qty 4

Quote:

Originally Posted by timski69gmc

Subscribing. I need all the rear seat bolts as well.

..

Dale99 · 04-08-2014, 06:58 PM

Quote:

Originally Posted by Dale99

gasket to top of a-post, ??? qty 6

Actually got one out w/o messing up threads. 1/4-20, roughly .50 long, pan head??

timski69gmc · 04-09-2014, 12:38 AM

Awesome, thanks! I am sure I will think of more.

Dale99 · 04-09-2014, 06:53 AM

This was meant for everyone to post what they know. But since I need help, I help others back.

jc06vmax · 04-09-2014, 08:56 AM

Sub'd. Great post.

Dale99 · 06-10-2014, 07:53 AM

Visor to windshield post screw
5/16-18 jackson panhead phillips screw, around .75 or 1.00 long. Very hard to find, however thanks to user bluek5, he found a place here. At the moment they are out, but I have a feeling if many people start placing an order, some will come into stock.
http://www.msc-stainless-fasteners.c...on-screws.html

Anyone know what screw is used to hold the hatch handle to the hatch?

**DeadheadNM** · 06-13-2014, 08:21 PM

Good idea for a thread! Pics are a huge help and salvage yard trucks are a wealth of OEM screw/bolt info with regard to type, size, and finish.

Here's the correct bolt w captured washer to affix the e-brake bracket at the dash. Pics show one I just had Parkerized and another installed.

There are a few other such unique bolts/screws I can think of, will try to post more.

tjsblazer · 06-13-2014, 09:08 PM

This is a great thread idea. Subscribed. I'll contribute where I can.

**DeadheadNM** · 06-13-2014, 09:40 PM

More unique screws/bolts: 12 point screw to attach the hood latch to rad support (note the cool anchor on the head! - not all had these), Phillips head screw to attach the door latch, and trim screw/ferrule to attach a 72 door panel all shown in correct finish

Dale99 · 06-14-2014, 08:55 AM

I wondered how the ebrake release was attached. Mine just flops around. Now I know

**DeadheadNM** · 06-14-2014, 08:24 PM

Example pics of the screws used to affix the cowl: stainless on top, Parkerized with a captured washer (same as those used to affix the glove box hinge to the dash) under the hood at the cowl to hood seal.

Dale99 · 06-14-2014, 10:25 PM

deadhead, could you post thread size and lengths on some of these?

Specifically, I'm interested in the one for the ebrake setup. But would like all of them for others restoration projects, even if they cant get the originals. Atleast some off the shelf.

**DeadheadNM** · 06-14-2014, 10:48 PM

Quote:

Originally Posted by Dale99

deadhead, could you post thread size and lengths on some of these?

Specifically, I'm interested in the one for the ebrake setup. But would like all of them for others restoration projects, even if they cant get the originals. Atleast some off the shelf.

Would if I had any clue

**DeadheadNM** · 06-15-2014, 12:00 AM

Correct (non)finish on the 9/16" bolts for the door striker plates, which use star washers

Dale99 · 06-21-2014, 05:22 PM

Can anyone hook me up with specs for the original hatch handle screws?

Dale99 · 06-23-2014, 09:12 AM

could also use info on the correct gravel guard nuts/bolts.

**DeadheadNM** · 06-23-2014, 11:11 PM

Quote:

Originally Posted by Dale99

Can anyone hook me up with specs for the original hatch handle screws?

Quote:

Originally Posted by Dale99

could also use info on the correct gravel guard nuts/bolts.

I'll dig these out and post pics...

Dale99 · 06-24-2014, 07:07 AM

Ty

04-08-2014, 07:55 AM	#1
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Name that bolt/nut/screw size I've been having problems finding fastener information while rebuilding my ride. I thought it would nice to have all this information in one thread. Since this is the blazer/jimmy section, lets try and get mainly info for them, but info that's the same for trucks is welcome. So, what the bolt is for, size-thread pitch, type head. Qty needed may be helpful as well. Double wall top visor bolt, 5/16-18, 2.375 long with 1.375 shoulder, hex, qty 2 bed bolts, 5/16-18, .875 or 1.00 long, w/washer, hex, qty 10 top to bracket, 5/16-18, .625 long, w/lock washer, panhead phillips #3, qty 4 frame to bracket, 5/16-18, 1.00 long, w/small washer, hex, qty 2 rear plate, 5/16-18, 1.00 long, hex, qty 6 Single wall top Bed bolts, 3/8-??, ?? long Visor bolts, 5/16-18, 1.00 long, oval head with custom .50 dia head, #2 phillips (cant find these anywhere) gasket to top of a-post, ??? qty 6 door sill plate screws, #8x1.00 panhead #2, qty 8 Pass Seat to floor, 5/16-??, 1.00 long, qty 6 Drivers seat to floor, 5/16-??, Rear seat to floor front bkt, ??, ??, Qty 2 Rear seat to floor rear bkt, ??, ??, Qty 4?? __________________ 2008 Sierra k3500 LMM 1994 s10 blazer 4x4 1991 Camaro Vert Rusted in Half RIP 1972 Jimmy 4x4 L05,4L60E,np205http://67-72chevytrucks.com/vboard/s...d.php?t=546364 1967 C10 L6/3tree(dads truck)

04-08-2014, 01:55 PM	#4
nicosorange Registered User Join Date: Nov 2010 Location: Phoenix,AZ Posts: 105	Re: Name that bolt/nut/screw size ADD: Rear Interior Spare Tire rack to floor? qty 4,???, ???

04-08-2014, 02:12 PM	#5
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Name that bolt/nut/screw size If you know it, add it. Mine has the holes, but no rack or bolts.

04-08-2014, 03:58 PM	#6
timski69gmc Registered User Join Date: Nov 2009 Location: Cranbrook, BC Posts: 253	Re: Name that bolt/nut/screw size Subscribing. I need all the rear seat bolts as well.

04-09-2014, 12:38 AM	#10
timski69gmc Registered User Join Date: Nov 2009 Location: Cranbrook, BC Posts: 253	Re: Name that bolt/nut/screw size Awesome, thanks! I am sure I will think of more.

04-08-2014, 11:00 AM	#2
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,762	Re: Name that bolt/nut/screw size I have to pull my 1/2 top off to get to the windshield bolts, might take awhile as im elbow deep in my build. Ill try to get to it Saturday __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

04-09-2014, 06:53 AM	#11
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Name that bolt/nut/screw size This was meant for everyone to post what they know. But since I need help, I help others back.

04-09-2014, 08:56 AM	#12
jc06vmax Registered User Join Date: Aug 2012 Location: Hartford, TN Posts: 56	Re: Name that bolt/nut/screw size Sub'd. Great post.

06-10-2014, 07:53 AM	#13
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Name that bolt/nut/screw size Visor to windshield post screw 5/16-18 jackson panhead phillips screw, around .75 or 1.00 long. Very hard to find, however thanks to user bluek5, he found a place here. At the moment they are out, but I have a feeling if many people start placing an order, some will come into stock. http://www.msc-stainless-fasteners.c...on-screws.html Anyone know what screw is used to hold the hatch handle to the hatch?

06-13-2014, 08:21 PM	#14
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: Name that bolt/nut/screw size Good idea for a thread! Pics are a huge help and salvage yard trucks are a wealth of OEM screw/bolt info with regard to type, size, and finish. Here's the correct bolt w captured washer to affix the e-brake bracket at the dash. Pics show one I just had Parkerized and another installed. There are a few other such unique bolts/screws I can think of, will try to post more. Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

06-13-2014, 09:08 PM	#15
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: Name that bolt/nut/screw size This is a great thread idea. Subscribed. I'll contribute where I can. __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336

06-13-2014, 09:40 PM	#16
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: Name that bolt/nut/screw size More unique screws/bolts: 12 point screw to attach the hood latch to rad support (note the cool anchor on the head! - not all had these), Phillips head screw to attach the door latch, and trim screw/ferrule to attach a 72 door panel all shown in correct finish Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

06-14-2014, 08:55 AM	#17
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Name that bolt/nut/screw size I wondered how the ebrake release was attached. Mine just flops around. Now I know

06-14-2014, 08:24 PM	#18
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: Name that bolt/nut/screw size Example pics of the screws used to affix the cowl: stainless on top, Parkerized with a captured washer (same as those used to affix the glove box hinge to the dash) under the hood at the cowl to hood seal. Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

06-14-2014, 10:25 PM	#19
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Name that bolt/nut/screw size deadhead, could you post thread size and lengths on some of these? Specifically, I'm interested in the one for the ebrake setup. But would like all of them for others restoration projects, even if they cant get the originals. Atleast some off the shelf.



Register or Log In To remove these advertisements.

06-15-2014, 12:00 AM	#21
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: Name that bolt/nut/screw size Correct (non)finish on the 9/16" bolts for the door striker plates, which use star washers Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

06-21-2014, 05:22 PM	#22
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Name that bolt/nut/screw size Can anyone hook me up with specs for the original hatch handle screws?

06-23-2014, 09:12 AM	#23
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Name that bolt/nut/screw size could also use info on the correct gravel guard nuts/bolts.

06-24-2014, 07:07 AM	#25
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Name that bolt/nut/screw size Ty

Register or Log In To remove these advertisements.