|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-01-2014, 11:09 PM
|
#1 |
|
18 Till I Die
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
|
Gas tank strap repair question?
On a 87 the gas tank straps are broken. I need a new tank anyway so I picked up new straps with the new tank. The old ones are riveted on and from searching it seems that everyone just drills them out and uses 1/4" bolts and lock nuts to reassemble. Now the brackets have the mounting for the plastic tank shield which I don't plan on putting back on. Do you drill right thru the rivits and the bracket. The rivits are only on the first bracket and dont go thru the second layer which is factory welded overtop..
__________________
2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home... 
|
|
|
|
05-02-2014, 06:39 AM
|
#2 |
|
Registered User
Join Date: Feb 2011
Location: MA
Posts: 116
|
Re: Gas tank strap repair question?
I cant remember but must have drilled or Ground off the rivets and drilled through. What I do remember is the straps were slightly different lengths. Be sure to put them in the correct spots.
My truck has dual tanks. |
|
|
|
|
05-02-2014, 09:12 AM
|
#3 |
|
Registered User
Join Date: Apr 2014
Location: Bloomington Indiana
Posts: 1,041
|
Re: Gas tank strap repair question?
Can't help on the rivet; the garage did that. But I used sidewalk bolts to put the straps back on. Very low and wide heads, with one layer of anti-squeak with holes in it for the bolt heads, then another layer over the top. This so that the heads wouldn't rub on the tank. The rivets are very low profile, but most bolt heads are taller, and I though that was asking for trouble. And stainless, of course, so they wouldn't rust.
http://www.mcmaster.com/#90015a414/=rsg0c8
__________________
Rich Weyand 1978 K10 RCSB DD. |
|
|
|
|
05-02-2014, 12:05 PM
|
#4 |
|
Another Day, Another Dollar
Join Date: Nov 2008
Location: North Vancouver, BC
Posts: 1,316
|
Re: Gas tank strap repair question?
I was in the bush when I did mine and I ended up making rivets out of 3" nails. Cut em down to 1/4" or so and then pounded them in place on a vice
__________________
-78 K20 Cheyenne 454 long box, 4" lift, 35" MT's, '84 cab, '80 box "its hip to be square" 
|
|
|
|
|
09-24-2014, 05:07 AM
|
#5 | |
|
Registered User
Join Date: Sep 2013
Location: Bakersfield Ca.
Posts: 78
|
Re: Gas tank strap repair question?
Quote:
__________________
Will I ever finish my 1986 stepper.. |
|
|
|
|
|
09-28-2014, 12:35 AM
|
#6 |
|
BMW & ASE Master Certified
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,266
|
Re: Gas tank strap repair question?
When I replaced mine, I just drilled the rivet off and used a carrage bolt and then insulated the strap with a rubber strip .
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
