OR Hard upper steel radiator pipe - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NEWFISHER · 05-28-2014, 07:56 PM

I had a few of these reproduced and now have a few more people asking for them. They are an almost exact copy of the original and when painted, look identical even down to the knurled ends to hold the clamps.

$30 plus shipping...just figure $15 in a long flat rate box. If it's more or less I will let you know when I am at the post office, but $15 gets you close enough to know if you want one.

LostMy65 · 05-28-2014, 08:41 PM

Are these for 60-62, or 63-66 ?
I think the 60-62 have the upper spout in the middle, and the 63-66 have them to one side.

NEWFISHER · 05-29-2014, 12:30 AM

Sorry, I wasn't aware of the split. These would be for the later model ones and duplicated from a 66.

pimpston65 · 05-29-2014, 05:55 AM

Quote:

Originally Posted by NEWFISHER

Sorry, I wasn't aware of the split. These would be for the later model ones and duplicated from a 66.

you still have em, i'll take the one on top!!!

1963c-10 · 05-29-2014, 09:27 AM

Payment sent for 2 this a.m., Thanks again!!

pimpston65 · 05-29-2014, 09:40 AM

Quote:

Originally Posted by NEWFISHER

I had a few of these reproduced and now have a few more people asking for them. They are an almost exact copy of the original and when painted, look identical even down to the knurled ends to hold the clamps.

$30 plus shipping...just figure $15 in a long flat rate box. If it's more or less I will let you know when I am at the post office, but $15 gets you close enough to know if you want one.

id like to see the bottom hose made out of metal to match the top

chad64chevy · 05-30-2014, 09:40 PM

payment sent

NEWFISHER · 05-31-2014, 01:54 AM

Thanks guys. All pm's responded to and 2nd batch will be ready to ship end of next week.

b.sharp · 06-04-2014, 01:26 PM

These are for V8's only correct? I have never seen one of these on an inline.

NEWFISHER · 06-04-2014, 04:18 PM

Quote:

Originally Posted by b.sharp

These are for V8's only correct? I have never seen one of these on an inline.

Yes...64-66 V8

**pdxhall** · 06-04-2014, 05:11 PM

Are these pipes made of stainless?

NEWFISHER · 06-04-2014, 07:50 PM

Quote:

Originally Posted by pdxhall

Are these pipes made of stainless?

Aluminized exhaust tubing....could be stainless but harder to work with and triples the cost of materials. I can ask "my guy" if you are interested.

**Captainfab** · 06-04-2014, 10:55 PM

These will also work on a '63 with a small block.

pimpston65 · 06-05-2014, 04:15 PM

Quote:

Originally Posted by NEWFISHER

I had a few of these reproduced and now have a few more people asking for them. They are an almost exact copy of the original and when painted, look identical even down to the knurled ends to hold the clamps.

$30 plus shipping...just figure $15 in a long flat rate box. If it's more or less I will let you know when I am at the post office, but $15 gets you close enough to know if you want one.

i would still like one, but im gonna switch to the 292 and not sure if the steel is correct for the inline 6

**pdxhall** · 06-09-2014, 03:56 AM

I'm interested in one if you have more.

NEWFISHER · 06-09-2014, 09:37 PM

Quote:

Originally Posted by NEWFISHER

Aluminized exhaust tubing....could be stainless but harder to work with and triples the cost of materials. I can ask "my guy" if you are interested.

This batch is all aluminized tube. Factory ones were just painted mild steel

**pdxhall** · 06-09-2014, 09:44 PM

The aluminized tube is fine for me. Shipping to 97230 or delivery to Portland.

NEWFISHER · 06-11-2014, 03:12 PM

Quote:

Originally Posted by pdxhall

The aluminized tube is fine for me. Shipping to 97230 or delivery to Portland.

Sent you a PM

pimpston65 · 06-11-2014, 04:25 PM

Quote:

Originally Posted by NEWFISHER

Sent you a PM

hey fish, whats up with the tower clamps and the rubber ends? not sure if you spoke on it yet...

**pdxhall** · 06-12-2014, 03:21 AM

Payment sent. thanks.

NEWFISHER · 06-12-2014, 03:26 PM

Quote:

Originally Posted by pdxhall

Payment sent. thanks.

Part sent...thank you

1963c-10 · 06-13-2014, 10:46 AM

Got both of mine in yesterday....look great. Thanks!!!!

NEWFISHER · 06-13-2014, 01:36 PM

Thank you...
I have 1 left

74baggedbug · 06-13-2014, 09:59 PM

Will this work for the 67-72 ? If so I'll take it

NEWFISHER · 06-13-2014, 10:15 PM

Quote:

Originally Posted by 74baggedbug

Will this work for the 67-72 ? If so I'll take it

I have no idea, but for $30 for the pipe and $15 to ship it, if it doesn't work I'm sure you know a guy with a 63-66 V8 truck that would love it

05-28-2014, 07:56 PM	#1
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Hard upper steel radiator pipe I had a few of these reproduced and now have a few more people asking for them. They are an almost exact copy of the original and when painted, look identical even down to the knurled ends to hold the clamps. $30 plus shipping...just figure $15 in a long flat rate box. If it's more or less I will let you know when I am at the post office, but $15 gets you close enough to know if you want one. __________________ GOD BLESS AMERICA!

05-28-2014, 08:41 PM	#2
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: Hard upper steel radiator pipe Are these for 60-62, or 63-66 ? I think the 60-62 have the upper spout in the middle, and the 63-66 have them to one side. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

05-29-2014, 12:30 AM	#3
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Re: Hard upper steel radiator pipe Sorry, I wasn't aware of the split. These would be for the later model ones and duplicated from a 66. __________________ GOD BLESS AMERICA!

05-29-2014, 09:27 AM	#5
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: Hard upper steel radiator pipe Payment sent for 2 this a.m., Thanks again!! __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

05-30-2014, 09:40 PM	#7
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: Hard upper steel radiator pipe payment sent __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163

05-31-2014, 01:54 AM	#8
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Re: Hard upper steel radiator pipe Thanks guys. All pm's responded to and 2nd batch will be ready to ship end of next week. __________________ GOD BLESS AMERICA!

06-04-2014, 01:26 PM	#9
b.sharp Registered User Join Date: May 2006 Location: Frankfort, Kentucky Posts: 508	Re: Hard upper steel radiator pipe These are for V8's only correct? I have never seen one of these on an inline.

06-04-2014, 05:11 PM	#11
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,084	Re: Hard upper steel radiator pipe Are these pipes made of stainless? __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

06-04-2014, 10:55 PM	#13
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Hard upper steel radiator pipe These will also work on a '63 with a small block. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

06-09-2014, 03:56 AM	#15
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,084	Re: Hard upper steel radiator pipe I'm interested in one if you have more. __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

06-09-2014, 09:44 PM	#17
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,084	Re: Hard upper steel radiator pipe The aluminized tube is fine for me. Shipping to 97230 or delivery to Portland. __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

06-12-2014, 03:21 AM	#20
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,084	Re: Hard upper steel radiator pipe Payment sent. thanks. __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

06-13-2014, 10:46 AM	#22
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: Hard upper steel radiator pipe Got both of mine in yesterday....look great. Thanks!!!! __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

06-13-2014, 01:36 PM	#23
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Re: Hard upper steel radiator pipe Thank you... I have 1 left __________________ GOD BLESS AMERICA!

06-13-2014, 09:59 PM	#24
74baggedbug Registered User Join Date: Oct 2011 Location: Houston tx Posts: 701	Re: Hard upper steel radiator pipe Will this work for the 67-72 ? If so I'll take it



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.