Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
07-05-2014, 03:38 PM | #1 |
Registered User
Join Date: Sep 2007
Location: Wichita Falls, Texas
Posts: 459
|
Column to floor shift conversion
I'm working on an 82 2wd blazer. It currently has a 700r4 that got filled up with water from a bad radiator. I am kicking around the idea of swapping it over to a standard transmission like a super T-10. I have sourced a floor shift tilt column and hydraulic clutch assembly. I expect to have to build/modify the crossmember, but what else is different? Will my main underdash harness work? I can think of the neutral safety switch and backup light switch being different. Are these connectors separate from the main harness or should I swap all the dash harness? I searched on here a little but didn't come up with too many answers.
|
07-05-2014, 03:54 PM | #2 |
Registered User
Join Date: Jun 2014
Location: Orlando Florida
Posts: 1,598
|
Re: Column to floor shift conversion
I wouldn't switch the harness for the simple changes you need to make. Reverse lights and neutral safety go through the column switch. Unplug it and wire from it as necessary.
|
Bookmarks |
|
|