WTB: Driver Side A-Frame.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

boataddict26 · 08-08-2003, 12:59 PM

I need a driver side lower A-Frame piece that will fit a 78 2WD. I dont need the top part just the bottom. Needs to be in perfect condition.
Michael

tibbar · 08-09-2003, 11:41 AM

1/2 or 3/4 ton , do you want it complete or just the arm, Have large assortment, anyway you want them, $15. Thanks Tibbar

boataddict26 · 08-09-2003, 11:58 AM

1/2 ton. I only need the bottom half. Can you post some pics?
Thanks,
Michael

tibbar · 08-09-2003, 12:13 PM

Sorry I don't have a camera. Tibbar

boataddict26 · 08-09-2003, 12:20 PM

How much will shipping be to 32038 in Fl.?

tibbar · 08-09-2003, 10:41 PM

I'll figure it out and let you know sun afternoon, Hope that's soon enough. Thanks tibbar

junkyardpartseeker · 08-09-2003, 10:49 PM

Mike, you can trust tibbar. He is honest and fair. I have personally dealt with him and he kept me informed on what was going on. He will insure you get the correct part you are needing.

Tommy

boataddict26 · 08-09-2003, 10:51 PM

Thanks for the reasurance Tommy. Tibbar, tomorrow is fine.
Mike

tibbar · 08-09-2003, 11:43 PM

Did you want it complete with lower bushing shaft, bushings and ball joint. Or do you want it bare. Need to know which one to weigh. Thanks Tibbar

boataddict26 · 08-10-2003, 12:07 AM

Go ahead and send lower bushing shaft, bushings and ball joint. My arm is bent up pretty bad and I dont know what I am going to find when I get it tore down.

tibbar · 08-10-2003, 01:13 AM

Just curious what happened? Tibbar

boataddict26 · 08-10-2003, 11:37 AM

The person who had the truck before me had it set up to do the exact opposite of what I am aiming for. They had the big tires on it and all. And liked to go flying through the woods running over stuff. Well from what the guy told me before I bought the truck, they hit a stump and it curled the A-Arm under. (I have always been told it was an A-Frame).

08-08-2003, 12:59 PM	#1
boataddict26 Registered User Join Date: Mar 2003 Location: North Central Florida Posts: 726	WTB: Driver Side A-Frame.... I need a driver side lower A-Frame piece that will fit a 78 2WD. I dont need the top part just the bottom. Needs to be in perfect condition. Michael __________________ 1978 Chevy C10 Currently under resto. 350 Getting face lift. .060, JEpistons, Modify heads. More will come with money.

08-09-2003, 11:41 AM	#2
tibbar Registered User Join Date: Jun 2003 Location: turon ks Posts: 120	a-arm 1/2 or 3/4 ton , do you want it complete or just the arm, Have large assortment, anyway you want them, $15. Thanks Tibbar

08-09-2003, 11:58 AM	#3
boataddict26 Registered User Join Date: Mar 2003 Location: North Central Florida Posts: 726	1/2 ton. I only need the bottom half. Can you post some pics? Thanks, Michael __________________ 1978 Chevy C10 Currently under resto. 350 Getting face lift. .060, JEpistons, Modify heads. More will come with money.

08-09-2003, 12:13 PM	#4
tibbar Registered User Join Date: Jun 2003 Location: turon ks Posts: 120	a-arm Sorry I don't have a camera. Tibbar

08-09-2003, 12:20 PM	#5
boataddict26 Registered User Join Date: Mar 2003 Location: North Central Florida Posts: 726	How much will shipping be to 32038 in Fl.? __________________ 1978 Chevy C10 Currently under resto. 350 Getting face lift. .060, JEpistons, Modify heads. More will come with money.

08-09-2003, 10:41 PM	#6
tibbar Registered User Join Date: Jun 2003 Location: turon ks Posts: 120	a-arm I'll figure it out and let you know sun afternoon, Hope that's soon enough. Thanks tibbar

08-09-2003, 10:49 PM	#7
junkyardpartseeker Registered User Join Date: Mar 2003 Location: Mabelvale, AR Posts: 695	boataddict26 Mike, you can trust tibbar. He is honest and fair. I have personally dealt with him and he kept me informed on what was going on. He will insure you get the correct part you are needing. Tommy __________________ junkyardpartseeker@sbcglobal.net

08-09-2003, 10:51 PM	#8
boataddict26 Registered User Join Date: Mar 2003 Location: North Central Florida Posts: 726	Thanks for the reasurance Tommy. Tibbar, tomorrow is fine. Mike __________________ 1978 Chevy C10 Currently under resto. 350 Getting face lift. .060, JEpistons, Modify heads. More will come with money.

08-09-2003, 11:43 PM	#9
tibbar Registered User Join Date: Jun 2003 Location: turon ks Posts: 120	a-arm Did you want it complete with lower bushing shaft, bushings and ball joint. Or do you want it bare. Need to know which one to weigh. Thanks Tibbar

08-10-2003, 12:07 AM	#10
boataddict26 Registered User Join Date: Mar 2003 Location: North Central Florida Posts: 726	Go ahead and send lower bushing shaft, bushings and ball joint. My arm is bent up pretty bad and I dont know what I am going to find when I get it tore down. __________________ 1978 Chevy C10 Currently under resto. 350 Getting face lift. .060, JEpistons, Modify heads. More will come with money.

08-10-2003, 01:13 AM	#11
tibbar Registered User Join Date: Jun 2003 Location: turon ks Posts: 120	a-arm Just curious what happened? Tibbar

08-10-2003, 11:37 AM	#12
boataddict26 Registered User Join Date: Mar 2003 Location: North Central Florida Posts: 726	The person who had the truck before me had it set up to do the exact opposite of what I am aiming for. They had the big tires on it and all. And liked to go flying through the woods running over stuff. Well from what the guy told me before I bought the truck, they hit a stump and it curled the A-Arm under. (I have always been told it was an A-Frame). __________________ 1978 Chevy C10 Currently under resto. 350 Getting face lift. .060, JEpistons, Modify heads. More will come with money.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.