WANTED: Rochester Monojet for 250-6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tkeduk8r** · 08-10-2003, 04:15 PM

Lookin for a reliable monojet for my 74 C10. I am posting this on both 67-72 and 73-87 parts boards. Mine has had troubles (even after blueprinting it), and i want to go after a replacement. Hopefully one of you guys or gals has a good one left over after a small or big block transplant... send me a pm... THANKS!!!
--Mike

**crossy** · 08-11-2003, 01:00 AM

MIKE! where you been ? are the students learning you anything?

**tkeduk8r** · 08-11-2003, 01:10 AM

Oh im still livin... been putting most of the car projects on hold since i have ALOT left to do yet renovating the shop at the school ill be teaching at up here int he fall... the guy i will be working with (ive got hte wood shop) teaches all auto classes and is an old truck nut too, weve been swapping stories and a few parts as we work together gettin stuff ready for the kids!!! Im tryin to get hom to join the board, but weel see... But ive come to the conclusion that my carb is not right, and hasnt been since ive had this 74 since last summer even after rebuiding, adjusting, rebuilding, adjusting and on and on... it starts hard and the milage isnt as good as i would htink it would be...only about 13-14 at best... ive got a 70 mile commute till i find a deal on a place near the school so those milage numbers are important right now... havnt been junkyardsing at all lately, suffering from withdrawl i think... whats goin on with you??? any new projects... I found a 63 half ton 235-6 SWB 2WD wood bed that seems allthere,very little rust thats calling my name, but i wont drive by the place cuz i dont want to be tempted..he wants 3K for it.. but like i said i dont wanna go look at it cuz i really dont need it!!! anyway, i cant sleep so im up rambling!!! keep in touch...
--Mike

**crossy** · 08-11-2003, 01:21 AM

mike, my 84 SWB body and 85 SWB stepside and the convertible are currently for sale . I just sold my restored triumph bonneville so that should give you an idea of my current plans for projects. I may even sell the camino. My doctor said i need to take care of me for a while. DAVE

**tkeduk8r** · 08-11-2003, 01:26 AM

Sorry to hear that... I hope its nothing too serious, but i definety wish you the best guy,if i can help you out in any way lemme know!!! I have to get up in bout 5 hrs and Im up looking at headers and intakes for the 250... im sick too... maybe my doc would tell me the same thing

--Mike

08-10-2003, 04:15 PM	#1
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	WANTED: Rochester Monojet for 250-6 Lookin for a reliable monojet for my 74 C10. I am posting this on both 67-72 and 73-87 parts boards. Mine has had troubles (even after blueprinting it), and i want to go after a replacement. Hopefully one of you guys or gals has a good one left over after a small or big block transplant... send me a pm... THANKS!!! --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

08-11-2003, 01:00 AM	#2
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	MIKE! where you been ? are the students learning you anything? __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

08-11-2003, 01:10 AM	#3
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Oh im still livin... been putting most of the car projects on hold since i have ALOT left to do yet renovating the shop at the school ill be teaching at up here int he fall... the guy i will be working with (ive got hte wood shop) teaches all auto classes and is an old truck nut too, weve been swapping stories and a few parts as we work together gettin stuff ready for the kids!!! Im tryin to get hom to join the board, but weel see... But ive come to the conclusion that my carb is not right, and hasnt been since ive had this 74 since last summer even after rebuiding, adjusting, rebuilding, adjusting and on and on... it starts hard and the milage isnt as good as i would htink it would be...only about 13-14 at best... ive got a 70 mile commute till i find a deal on a place near the school so those milage numbers are important right now... havnt been junkyardsing at all lately, suffering from withdrawl i think... whats goin on with you??? any new projects... I found a 63 half ton 235-6 SWB 2WD wood bed that seems allthere,very little rust thats calling my name, but i wont drive by the place cuz i dont want to be tempted..he wants 3K for it.. but like i said i dont wanna go look at it cuz i really dont need it!!! anyway, i cant sleep so im up rambling!!! keep in touch... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

08-11-2003, 01:21 AM	#4
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	mike, my 84 SWB body and 85 SWB stepside and the convertible are currently for sale . I just sold my restored triumph bonneville so that should give you an idea of my current plans for projects. I may even sell the camino. My doctor said i need to take care of me for a while. DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

08-11-2003, 01:26 AM	#5
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Sorry to hear that... I hope its nothing too serious, but i definety wish you the best guy,if i can help you out in any way lemme know!!! I have to get up in bout 5 hrs and Im up looking at headers and intakes for the 250... im sick too... maybe my doc would tell me the same thing --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.