63-66 gmc v6 motor mount stool to frame?

[hotrod66]

any one have a pic of a v6 motor mount stool thats out of a truck? i am thinking they may be the same as the one for a 292 I6 on the passenger side.
thanks David

[padresag]

here is a set of v6 perches and a std v8 one. I do have a std r/side 292 perch around somewhere. if I run across it I will compare. the mounting holes are different for one instance at the centre insulator mount and the height of the perch at that spot seems to be different
ron

[padresag]

the first pic in the following link will perhaps show you the difference
http://www.persh.org/pickup/perches.htm
ron

[hotrod66]

Originally Posted by padresag

here is a set of v6 perches and a std v8 one. I do have a std r/side 292 perch around somewhere. if I run across it I will compare. the mounting holes are different for one instance at the centre insulator mount and the height of the perch at that spot seems to be different
ron

thanks ron. i have one 292 mount and it looks different than the v6 was just trying to think out side the box. i figured they would use the 292 mount on something ells but guess not. have had a tough time trying to find another mount for my other 292 truck currently it only has 1 thanks again guys
David

[Captainfab]

I assume you are looking for the passenger side? If so I will look and see if I may have one.

Originally Posted by hotrod66

thanks ron. i have one 292 mount and it looks different than the v6 was just trying to think out side the box. i figured they would use the 292 mount on something ells but guess not. have had a tough time trying to find another mount for my other 292 truck currently it only has 1 thanks again guys
David

[hotrod66]

Originally Posted by Captainfab

I assume you are looking for the passenger side? If so I will look and see if I may have one.

that would be awesome!

[Budman56]

So this is what I did because I couldn't find a perch. I cut 1 inch out of the top mounting holes, of a V-8 perch. then I used some roughly 1" nuts to space the top off the frame rail.

[padresag]

did you ask for one. I usually have one around
ron

[Budman56]

Originally Posted by padresag

did you ask for one. I usually have one around
ron

yep but no one had one so I made my own.

[poledust]

Originally Posted by padresag

did you ask for one. I usually have one around
ron

Hi, I have a 1967 chevy c10 that I'm building with a 292 and I am in need of the passenger side engine perch? I was wondering if you might still have one? If so what would you let it go for? Thanks!

[padresag]

67 may be different I don't know. there are rules for buying and selling on here
ron