What pump to use in a 87 factory tank? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dwcardfan · 09-12-2014, 10:19 PM

I am helping a buddy with his build on a 1982 chevy that he will be putting a 2003 5.3 and 4l60e. He wants to use a 87 factory tank and sending unit but replace the pump with a high pressure in tank pump. What pump would be the best to use?

Thanks for the help!

**dec010974** · 09-12-2014, 10:50 PM

Hello. If i remember correctly, 1987 c10 square bodies have a TBI fuel injection. If that's the case the ac delco ep381 pump should be easily swapped for the TBI fuel pump. Good luck.

dwcardfan · 09-12-2014, 11:39 PM

Thanks for your help dec

Andy4639 · 09-13-2014, 09:57 AM

If the tank already has a intank pump just buy a replacement pump for the motor the truck came out of and install it.

87chevy.com · 10-02-2014, 12:35 AM

Quote:

Originally Posted by Andy4639

If the tank already has a intank pump just buy a replacement pump for the motor the truck came out of and install it.

A TBI truck motor pump runs at what psi 16? I used
the pump mentioned above.. Think the application was a tuned port corvette

**truckdude239** · 10-02-2014, 08:12 AM

ac delco ep381 IS WHAT I USED IN MY 80 SUBURBAN TANK

solidaxel · 10-04-2014, 09:27 AM

I just went to the parts store and ordered a in tank pump for a 2003 Camaro with a V-8
Works great. maybe it was the same as the EP381, did not save the box!
It fit the 87 small tank 16ga. and the sender was for the 87 also and now I have a working gas gauge!

dwcardfan · 10-04-2014, 04:12 PM

Thanks for the help guys. We just put a walbro 255 on the 87 sending unit. I just had to solder the wires because it had a different plug. Other than that it fit great. We also put a new 87 tank in his truck to have the baffles. Total I think he spent around $240 for new tank, sending unit and pump.

09-12-2014, 10:19 PM	#1
dwcardfan Registered User Join Date: Sep 2013 Location: Strawberry Arkansas Posts: 1,137	What pump to use in a 87 factory tank? I am helping a buddy with his build on a 1982 chevy that he will be putting a 2003 5.3 and 4l60e. He wants to use a 87 factory tank and sending unit but replace the pump with a high pressure in tank pump. What pump would be the best to use? Thanks for the help! __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=605217

09-12-2014, 10:50 PM	#2
dec010974 Senior Member Join Date: Oct 2012 Location: Miami, Florida Posts: 959	Re: What pump to use in a 87 factory tank? Hello. If i remember correctly, 1987 c10 square bodies have a TBI fuel injection. If that's the case the ac delco ep381 pump should be easily swapped for the TBI fuel pump. Good luck.

09-12-2014, 11:39 PM	#3
dwcardfan Registered User Join Date: Sep 2013 Location: Strawberry Arkansas Posts: 1,137	Re: What pump to use in a 87 factory tank? Thanks for your help dec __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=605217

09-13-2014, 09:57 AM	#4
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: What pump to use in a 87 factory tank? If the tank already has a intank pump just buy a replacement pump for the motor the truck came out of and install it. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

10-02-2014, 08:12 AM	#6
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: What pump to use in a 87 factory tank? ac delco ep381 IS WHAT I USED IN MY 80 SUBURBAN TANK __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

10-04-2014, 09:27 AM	#7
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: What pump to use in a 87 factory tank? I just went to the parts store and ordered a in tank pump for a 2003 Camaro with a V-8 Works great. maybe it was the same as the EP381, did not save the box! It fit the 87 small tank 16ga. and the sender was for the 87 also and now I have a working gas gauge! __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

10-04-2014, 04:12 PM	#8
dwcardfan Registered User Join Date: Sep 2013 Location: Strawberry Arkansas Posts: 1,137	Re: What pump to use in a 87 factory tank? Thanks for the help guys. We just put a walbro 255 on the 87 sending unit. I just had to solder the wires because it had a different plug. Other than that it fit great. We also put a new 87 tank in his truck to have the baffles. Total I think he spent around $240 for new tank, sending unit and pump. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=605217



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.