64 C10 saginaw power steering pump - The 1947 - Present Chevrolet & GMC Truck Message Board Network

elane352 · 09-24-2014, 03:14 PM

Hello,

After replacing the power steering gear, I noticed that I needed to replace the saginaw pump.

Since the prior owner has passed, I do not know what pump part number I should use. I cannot get a part number off of the pump either.

Does anyone have an idea what type of pump I can use? I know that Cardone has parts 20-300 through 20-302. I was not sure about these since the web site refers to C4 and C5 series trucks.

Any insight would be appreciated.

Eddie

**Captainfab** · 09-24-2014, 11:48 PM

What engine is in your truck? Do you happen to have a pic you could post?

mafosa · 09-25-2014, 08:55 AM

I rebuilt mine about a month ago. advanceauto part had the rebuild kit.

even came with the bushing. part # 7910 (powercraft) is the manufacture.

it has several different seals to cover different years.

this is the pump I have.

larry

elane352 · 09-26-2014, 12:12 PM

Many thanks for the photo. Just today I got the a Saginaw pump that looks exactly like yours. I had to return the other (non-Saginaw) pump.

I got so involved with the power steering gear replacement that I got lazy and asked my mechanic to deal with the pump since I could not get my hand down in the area to unbolt things. I darn near could not get a wrench down there well either. I just ran out of gas at that point.

Another thing that was a bit interesting and irritating was that I had to change the brake hoses. Now that part is not irritating in itself. But what was was the fact that the 3/16th brake line did not mate up with the 1/4 inch hose. What was on the truck were brake hoses with a 3/16th end for the 3/16th brake line. But if you order a brake hose for a 64 C10, you wind up getting a 1/4 inch hose. So my guess is that maybe the brake hose I replaced was for some other application that does have a 3/16 inch end. I did not determine which application it was.

I elected to put a small extension (1/4 inch male on one end; and 3/16 inch female piece on the other end).

Appreciate again your response and picture.

Eddie

elane352 · 09-26-2014, 12:14 PM

I have pictures unfortunately on my non-smart phone that does not have internet service. So I cannot even send them to you or myself.

I would have to use my digital camera to take some pics.

Eddie

09-24-2014, 03:14 PM	#1
elane352 Registered User Join Date: Jul 2014 Location: Bowie, Maryland Posts: 82	64 C10 saginaw power steering pump Hello, After replacing the power steering gear, I noticed that I needed to replace the saginaw pump. Since the prior owner has passed, I do not know what pump part number I should use. I cannot get a part number off of the pump either. Does anyone have an idea what type of pump I can use? I know that Cardone has parts 20-300 through 20-302. I was not sure about these since the web site refers to C4 and C5 series trucks. Any insight would be appreciated. Eddie

09-24-2014, 11:48 PM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 64 C10 saginaw power steering pump What engine is in your truck? Do you happen to have a pic you could post? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

09-25-2014, 08:55 AM	#3
mafosa Registered User Join Date: Oct 2013 Location: irving Posts: 85	Re: 64 C10 saginaw power steering pump I rebuilt mine about a month ago. advanceauto part had the rebuild kit. even came with the bushing. part # 7910 (powercraft) is the manufacture. it has several different seals to cover different years. this is the pump I have. larry Attached Images

09-26-2014, 12:12 PM	#4
elane352 Registered User Join Date: Jul 2014 Location: Bowie, Maryland Posts: 82	Re: 64 C10 saginaw power steering pump Many thanks for the photo. Just today I got the a Saginaw pump that looks exactly like yours. I had to return the other (non-Saginaw) pump. I got so involved with the power steering gear replacement that I got lazy and asked my mechanic to deal with the pump since I could not get my hand down in the area to unbolt things. I darn near could not get a wrench down there well either. I just ran out of gas at that point. Another thing that was a bit interesting and irritating was that I had to change the brake hoses. Now that part is not irritating in itself. But what was was the fact that the 3/16th brake line did not mate up with the 1/4 inch hose. What was on the truck were brake hoses with a 3/16th end for the 3/16th brake line. But if you order a brake hose for a 64 C10, you wind up getting a 1/4 inch hose. So my guess is that maybe the brake hose I replaced was for some other application that does have a 3/16 inch end. I did not determine which application it was. I elected to put a small extension (1/4 inch male on one end; and 3/16 inch female piece on the other end). Appreciate again your response and picture. Eddie

09-26-2014, 12:14 PM	#5
elane352 Registered User Join Date: Jul 2014 Location: Bowie, Maryland Posts: 82	Re: 64 C10 saginaw power steering pump I have pictures unfortunately on my non-smart phone that does not have internet service. So I cannot even send them to you or myself. I would have to use my digital camera to take some pics. Eddie



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.