monroe sensa trac 4/6 drop

[bh86]

i have a 82 swb I'm in the process of building. I've got a mcgaughys 4/6 drop and I wanna run the monroe sensa tracs but need to figure out which part number would be correct, if anyone knows i'd appreciate the help!

[craig113]

I would call them in the morning and ask support...
MONROE SHOCKS & STRUTS: Contact Monroe® by Phone - 1-734-384-7809
8:30 a.m. - 5:30 p.m. EST M-F

also found this in one of the forums..

Re: lowering c10 1970, same shocks?
Let me give you a little bit of advice. If you buy stock front shocks for the front and install them on the rear you now have 5" drop rear shocks. I looked in the CPP catalog and the part number for the rear 5" drop shocks is the SAME part number for the front stock shocks. I did this on my 72 and they work perfectly. Just went down to Oreillys and bought some Monroe stock front shocks for like $20 each and saved some money.
__________________
Shawn

another link

http://67-72chevytrucks.com/vboard/s...d.php?t=335035

[bh86]

thanks!

[bh86]

Anyone know if I can order the factory length fronts and run them in the rear? I called and they told me their weren't any in a shorter application. They said the factory length for the front according to what they have listed is 9 3/4 compressed and 14 1/4 extended. I wanted to see if anyone knew wether or not they would work in the rear and I could figure something else out up front. Thanks

[Tilt]

I have 3" spindles and 1 coil cut off the stock springs and put on a set of the Monroe Sensa-Trac shocks (37049) on my 86 and they work great so far. I haven't put any on the rear yet.

[bh86]

Thanks I think I'll give those a shot

[camshaftgsxr]

i have sensatracs on my 84 with about 3 inches of spring drop, they will blow out very soon after install. jegs has nitro drop shocks for like $40

[midnight rambler]

I put shock extenders on the rear and ran there air shocks.

[bh86]

How do the nitro drops ride? Decent?

[bbbc10]

I have them they ride good to me