AZ ENGINE/LIGHT harness needed-nice - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dmartin1 · 12-09-2014, 11:05 AM

Once again I need another engine harness and complete light harness.
For my 69 swb Chevy.
In good condition please. prefer no broken stuff or burnt or spliced.

Lemme know what you have! It is needed bad

**TBONE1964** · 12-09-2014, 11:47 AM

Quote:

Originally Posted by dmartin1

Once again I need another engine harness and complete light harness.
For my 69 swb Chevy.
In good condition please. prefer no broken stuff or burnt or spliced.

Lemme know what you have! It is needed bad

What engine/trans combo? With air or no air?

I can check for you.

Thank you,
Tom

dmartin1 · 12-09-2014, 04:13 PM

it is a 350 sbc truck with air. auto column, and gauges not idiot lights.

know know how much of that you needed but couldnt hurt.

idk if im gonna go vintage air unit or retain factory air,but couldnt hurt to get an air harness.inside has air harness. thanks!

beetle1960 · 12-09-2014, 04:34 PM

I have a good engine harness for a 350 standard shift, only needs ring terminals at the starter solenoid and needs re-taped. 40.00 shipped.

**TBONE1964** · 12-10-2014, 12:13 AM

Quote:

Originally Posted by dmartin1

it is a 350 sbc truck with air. auto column, and gauges not idiot lights.

know know how much of that you needed but couldnt hurt.

idk if im gonna go vintage air unit or retain factory air,but couldnt hurt to get an air harness.inside has air harness. thanks!

I can get you the light harness for $40.00 and the engine harness for $50.00.

It will be $13.00 to ship. $103.00 total. Let me know if you are interested and I will get them ready to ship. I will have to get them out and double check the condition.

Thank you,
Topm

dmartin1 · 12-10-2014, 01:07 PM

tbone, if these are in good condition and will work for my application then thats a deal. double check condition(plugs/connectors/splices and cuts) and get back to me and ill get some $$ your way

**TBONE1964** · 12-10-2014, 04:08 PM

Quote:

Originally Posted by dmartin1

tbone, if these are in good condition and will work for my application then thats a deal. double check condition(plugs/connectors/splices and cuts) and get back to me and ill get some $$ your way

Give me a little bit of time to get them out and check them over for you. I will let you know either later today or tomorrow.

Thank you,
Tom

dmartin1 · 12-10-2014, 05:40 PM

sounds good.
thanks, tom

12-09-2014, 11:05 AM	#1
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	ENGINE/LIGHT harness needed-nice Once again I need another engine harness and complete light harness. For my 69 swb Chevy. In good condition please. prefer no broken stuff or burnt or spliced. Lemme know what you have! It is needed bad __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

12-09-2014, 04:13 PM	#3
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: ENGINE/LIGHT harness needed-nice it is a 350 sbc truck with air. auto column, and gauges not idiot lights. know know how much of that you needed but couldnt hurt. idk if im gonna go vintage air unit or retain factory air,but couldnt hurt to get an air harness.inside has air harness. thanks! __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

12-09-2014, 04:34 PM	#4
beetle1960 Registered User Join Date: Aug 2013 Location: Hiram Ohio Posts: 619	Re: ENGINE/LIGHT harness needed-nice I have a good engine harness for a 350 standard shift, only needs ring terminals at the starter solenoid and needs re-taped. 40.00 shipped. __________________ 1953 Chevy 3100 1964 Chevy Impala 1966 Chevy El Camino 1970 Chevy C10 Fleet Long 1972 Chevy C10 Step long 1985 Chevy K10 Fleet Short

12-10-2014, 01:07 PM	#6
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: ENGINE/LIGHT harness needed-nice tbone, if these are in good condition and will work for my application then thats a deal. double check condition(plugs/connectors/splices and cuts) and get back to me and ill get some $$ your way __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

12-10-2014, 05:40 PM	#8
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: ENGINE/LIGHT harness needed-nice sounds good. thanks, tom __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.