|
12-17-2014, 07:25 PM
|
#1 |
|
Registered User
Join Date: Dec 2013
Location: Williamsburg, VA
Posts: 10
|
66 sfa
Has anyone done a sfa on a 66 c10? I've got a set of 1 tons going under mine and am using 52" springs. Just looking for some direction as to the placement of the leaf springs.
|
|
|
|
12-18-2014, 12:54 AM
|
#2 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: 66 sfa
All GM trucks '87 and earlier came with solid front axles.
I would start with centering your Dana 60 in the front wheel opening, set your springs in place and see where the front hanger needs to be. You might also look into some of the components made by Kert at DIY4x. He makes a 52" conversion for the '67-'72's that should fit your '66 with minimal if any modification. http://www.diy4x.com
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
12-20-2014, 12:15 PM
|
#3 |
|
Registered User
Join Date: Dec 2013
Location: Williamsburg, VA
Posts: 10
|
Re: 66 sfa
Ok thanks. I've got the springs and everything already and I'm not worried about modification to much because it's just going to be drilling a few holes and maybe use a piece of square tubing off the frame because where the rear hanger lands the frame is at an angle. The modification doesn't worry me to much because this will be cake compared to making the 427 fit in there
|
|
|
|
|
12-20-2014, 01:14 PM
|
#4 |
|
Registered User
Join Date: Jan 2013
Location: Las Vegas, NV
Posts: 1,857
|
Re: 66 sfa
Swing shackles to the rear and if needed tube up front for springs. Or both depending on how much lift you want.
__________________
1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081 |
|
|
|
|
12-21-2014, 12:53 AM
|
#5 |
|
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: 66 sfa
Installing a big block isn't all that difficult.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
