Wht did you get done 12/28/14 say goodbye to 2014 edition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 12-28-2014, 08:37 PM

Last post like this for the year...
I had a productive weekend.. my son had rigged up a bolt in the sensor location for my oil pressure switch as he didn't have the right fittings. I got that replaced with the fittings and stuff so the sensor is back in then I got the tilt steering column done in the truck too. I have to get the dash squared away and finish the plow assembly

on the project I got the manual master installed and some of the springs for the clutch linkage in. Gotta get the brakes bled

My buddy almost finished the Nissan 300z motor swap and we got the shell loaded on my trailer as well as a lot of scrap ..tomorrow that goes to the scrapper.. also another buddy gave me a DSM shell to send to the scrapper
How about you all?

Jeramy · 12-28-2014, 10:25 PM

fixed my turn signals by removing the cobbled together 4 wire trailer connector, replaced the snap in tag lights in the bumper, put in a new dipstick for the engine, and removed all the extra added on wiring that i could safely remove. also tweaked my tailgate latch linkages so that you can now open tailgate with out help of a screw driver

it really is amazing to me how much of a difference fixing small things can make in a truck.

next things to tackle are dome light, cigarette lighter, rewire radio, and tweak adjustment on doors to line up gaps better.

MalibuSSwagon · 12-28-2014, 10:34 PM

Ordered new lower ball joints. Otherwise not much is happening.

Jaysonb · 12-28-2014, 11:32 PM

Put in a new starter, battery, and battery cables. The list of things that I haven't had to fix or replace is getting very small now. I also cleaned up and painted a nice grill I found, and upholstered my door panels.

SCOTI · 12-29-2014, 12:25 AM

Got my new bed lenses all swapped over for the bed. Sandblasted my Porterbuilt lower a-arms. Got them back to the shop, cleaned/degreased them, & shot them satin black.

D13 · 12-29-2014, 09:21 AM

Stole the battery out of the 77 to put in a tractor. Trying to decide what to do with my collection - too many worn out clunkers and no time.

Jonboy · 12-29-2014, 10:36 AM

I bought a '74 Jimmy to flip Saturday, and headed out to Texas Square Bodies Sunday. It was great finally getting to meet Tony after all of these years. I have a feeling that the Jimmy will probably end up staying, but I will keep telling myself it is going to be a flip anyhow.

SCOTI · 12-29-2014, 01:42 PM

Quote:

Originally Posted by Jonboy

I bought a '74 Jimmy to flip Saturday, and headed out to Texas Square Bodies Sunday. It was great finally getting to meet Tony after all of these years. I have a feeling that the Jimmy will probably end up staying, but I will keep telling myself it is going to be a flip anyhow.

Bring anything back from Tony's place?

68Timber · 12-29-2014, 02:55 PM

Quote:

Originally Posted by Jonboy

I bought a '74 Jimmy to flip Saturday.

Pic?

Jonboy · 12-29-2014, 04:34 PM

Quote:

Originally Posted by SCOTI

Bring anything back from Tony's place?

I picked up a few odds and ends for my junk out there. I made the mistake of taking my daughter out there with me. I could have spent all day looking at a square body junkyard. I was able to get some stuff I wasn't using out there to Tony as well. That was almost as good.

Quote:

Originally Posted by BRUISER

Pic?

I had a little snafu getting the truck back to my house. It arrived about 1:30 this morning. I get home after dark during the week, so maybe this weekend, if it doesn't rain like they are forecasting.

GM72K10 · 12-29-2014, 01:03 PM

Changed driver inner and outer fender on the M1028a1. Now no dents AND no rust.

Stepper86 · 12-29-2014, 05:58 PM

Finished up the welding on my steering conversion and made a temporary mockup with the rack installation. Picked up some DD shaft and support bearing to hook it up to the column.
Then the sun came out so I went outside with my daughter for some fun in the snow with her quad bike.

12-28-2014, 08:37 PM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Wht did you get done 12/28/14 say goodbye to 2014 edition Last post like this for the year... I had a productive weekend.. my son had rigged up a bolt in the sensor location for my oil pressure switch as he didn't have the right fittings. I got that replaced with the fittings and stuff so the sensor is back in then I got the tilt steering column done in the truck too. I have to get the dash squared away and finish the plow assembly on the project I got the manual master installed and some of the springs for the clutch linkage in. Gotta get the brakes bled My buddy almost finished the Nissan 300z motor swap and we got the shell loaded on my trailer as well as a lot of scrap ..tomorrow that goes to the scrapper.. also another buddy gave me a DSM shell to send to the scrapper How about you all? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-28-2014, 10:25 PM	#2
Jeramy Registered User Join Date: Dec 2014 Location: Mulberry, AR Posts: 222	Re: Wht did you get done 12/28/14 say goodbye to 2014 edition fixed my turn signals by removing the cobbled together 4 wire trailer connector, replaced the snap in tag lights in the bumper, put in a new dipstick for the engine, and removed all the extra added on wiring that i could safely remove. also tweaked my tailgate latch linkages so that you can now open tailgate with out help of a screw driver it really is amazing to me how much of a difference fixing small things can make in a truck. next things to tackle are dome light, cigarette lighter, rewire radio, and tweak adjustment on doors to line up gaps better.

12-28-2014, 10:34 PM	#3
MalibuSSwagon Registered User Join Date: Sep 2009 Location: Weare,NH Posts: 1,592	Re: Wht did you get done 12/28/14 say goodbye to 2014 edition Ordered new lower ball joints. Otherwise not much is happening. __________________ Eric 1992 Oldsmobile Custom Cruiser 1986 Chevrolet C10\|5.3L\|TKO600\|Shortbed\|Custom Deluxe 1983 Malibu Wagon\|TPI 305\|T5 5 speed\|3.73 non-posi

12-28-2014, 11:32 PM	#4
Jaysonb Registered User Join Date: May 2009 Location: Good Thunder Mn. Posts: 955	Re: Wht did you get done 12/28/14 say goodbye to 2014 edition Put in a new starter, battery, and battery cables. The list of things that I haven't had to fix or replace is getting very small now. I also cleaned up and painted a nice grill I found, and upholstered my door panels. Attached Images

12-29-2014, 12:25 AM	#5
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,066	Re: Wht did you get done 12/28/14 say goodbye to 2014 edition Got my new bed lenses all swapped over for the bed. Sandblasted my Porterbuilt lower a-arms. Got them back to the shop, cleaned/degreased them, & shot them satin black. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

12-29-2014, 09:21 AM	#6
D13 Registered User Join Date: Feb 2007 Location: Memphis MI Posts: 1,851	Re: Wht did you get done 12/28/14 say goodbye to 2014 edition Stole the battery out of the 77 to put in a tractor. Trying to decide what to do with my collection - too many worn out clunkers and no time. __________________ 1987 2 ton 1982 250/TH350 beater in progress Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping Plus a mess o' tractors

12-29-2014, 10:36 AM	#7
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Wht did you get done 12/28/14 say goodbye to 2014 edition I bought a '74 Jimmy to flip Saturday, and headed out to Texas Square Bodies Sunday. It was great finally getting to meet Tony after all of these years. I have a feeling that the Jimmy will probably end up staying, but I will keep telling myself it is going to be a flip anyhow. __________________ 1974 Jimmy- 5.3/4L80e/NP241

12-29-2014, 01:03 PM	#11
GM72K10 Next! Join Date: Jan 2003 Location: Eastern Pa. Posts: 2,483	Re: Wht did you get done 12/28/14 say goodbye to 2014 edition Changed driver inner and outer fender on the M1028a1. Now no dents AND no rust. __________________ 86 K30 CUCV M1028A1 86 K30 CUCV M1028a2 dually 86 K30 C&C 6.2 4:56s, 4M, 11,000 gvw, ex fire truck, now lowboy dump More square bodies and CUCVs than I care to admit to 2020 Silverado K3500HD Work truck

12-29-2014, 05:58 PM	#12
Stepper86 Registered User Join Date: Sep 2011 Location: Stockholm Posts: 263	Re: Wht did you get done 12/28/14 say goodbye to 2014 edition Finished up the welding on my steering conversion and made a temporary mockup with the rack installation. Picked up some DD shaft and support bearing to hook it up to the column. Then the sun came out so I went outside with my daughter for some fun in the snow with her quad bike. __________________ Tom.______________________________________ The fleet: 2007 BMW 530xi M (daily driver) 1986 C-10 Stepside (project "my time") 1992 Corvette cab (summer time daily driver) 1969 Cadilac DeVille Cab ("it just need some paint")



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.