Bucket seat question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 08-25-2003, 10:24 PM

May be buying a 72 which was originally a bench seat truck. PO installed a set of buckets from he believes a 71 truck or blazer. They appear to be sitting lower than a bench would.

Should there be certain mounting brackets installed with the buckets for them to sit "normal" height? Any info is appreciated.

Thanks!

**ScottH** · 08-26-2003, 09:29 AM

ttt

JimKshortstep4x4 · 08-26-2003, 12:16 PM

If they are Blazer seats with Blazer brackets, they will sit at the same height as the bench seats. I would asssume that the truck buckets would sit as high, also.

I am not sure what you have. Do you have any pics?

Jim

junkyardjohn · 08-26-2003, 12:22 PM

YEP -- JIMS RIGHT ON THE MONEY. I'VE REPLACED SEVERAL BENCH SEATS WITH BUCKETS. & IF YOU USE THE STOCK BUCKET SEAT SLIDES & RISERS OUT OF EITHER A PICKUP OR BLAZER, THEY ARE THE RIGHT HEIGHT. JOHN

**ScottH** · 08-26-2003, 09:19 PM

Thanks very much for the info. Hopefully I'll get the truck over the weekend and take a closer look.

*Gee_Emm* · 08-26-2003, 11:14 PM

Did 69 or 70 Blazers come with different looking seats then 71 and 72's? I saw one at a junkyard with metal backs on the seats but I thought all Blazer buckets looked the same.

GMC JUNKIE TOO · 08-27-2003, 12:37 AM

gee emm I belive the seats with the squareish metal backs were called utility buckets.

red71cheyenne · 08-27-2003, 05:22 AM

uh oh! Whats the difference between regular buckets and "utility" buckets. I thought they all had metal backs to them. Thanks, Jeff.

Huck · 08-27-2003, 08:08 AM

Utility buckets are bigger - more square then the sport buckets. Utility buckets did have metal backs and came in the Blazer/BurbsS--but not the light trucks. Sport buckets had plastic backs in the blazers/burbs but no backs in the trucks.
When I put sport buckets into my truck, I used stock, correct truck mounts but was not happy with the "feel" so I put some 2x4 wood blocks under the mounts which raised the seats about 1&3/4 inch. Now the seat backs are slightly higher then the lower section of the rear window metal which allows for the seats to sit back just a bit more. This way I get a little more leg room.

red71cheyenne · 08-27-2003, 08:19 AM

Dang! I guess that means I will be looking for a set of the sport buckets. The new seat covers I have probably won't fit either. They are houndstooth model. Man. Anybody want to trade for a set of utility buckets?

**ScottH** · 08-27-2003, 12:28 PM

One more question......the truck I will be getting is a 72 super cheyenne. If I want to keep it stock looking, should the seats be recovered in houndstooth, or did they also use the plain design on the buckets in a 72 super as well (seats not original to the truck, but would like to keep as original in appearance as I can).

Thanks again guys.

tom hand · 08-27-2003, 12:35 PM

Buckets only came from the factory with the scroll vinyl covers...the hounds tooth bucket covers are something the parts suppliers started making

*Gee_Emm* · 08-27-2003, 06:59 PM

What about the plaid seat covers and the style in my Jimmy, just plain perforated black, they don't have any scroll.

Rod · 08-27-2003, 10:58 PM

There were four available highland trim seat patterns for buckets in Blazers and Suburbans in 72... 71 I think so also..

Metal back auxilary bucket seat were available in all year Blazers.

Rod · 08-27-2003, 11:03 PM

Also 69-70 truck sub/ blazer / buckets had one scroll and 71-72 truck/ blazer sub/ buckets had 2 scrolls. If they had the sport bucket option... A50.

red71cheyenne · 08-27-2003, 11:08 PM

Anybody know if the seat covers I have will fit the utility buckets? They are houndstooth style. How much bigger are the utility seats anyway?

*Gee_Emm* · 08-27-2003, 11:22 PM

The utility buckets are quite a bit bigger, maybe 6 inches wider then the sport buckets.

Rod · 08-27-2003, 11:25 PM

truck type buckets same as blazer except for mounting of passenger side... so No the two type seat covers wont interchange.

Rod · 08-27-2003, 11:25 PM

Metal back Blazer seats.

red71cheyenne · 08-27-2003, 11:33 PM

Anyone know of a set of sport buckets for sale or trade?

**ScottH** · 08-28-2003, 10:02 AM

Wow great info guys thanks, and the pics are really appreciated.

BTW I noticed someone on the board referencing floorpans from a truck with buckets. Is the only difference in the floor pan the bolt holes for the brackets, or were there other changes between a bench vs bucket truck floorpan?

**CPNE** · 08-28-2003, 10:09 AM

The floorpan is the same with all seat configurations. The bucket equipped trucks had a different bolt hole location and reenforcement brackets welded to underside of cab.

It's an easy swap to put in OE 69-72 buckets in place of your bench...and it's a CPNE approved upgrade!

*Gee_Emm* · 08-28-2003, 07:05 PM

Actually the utilility bucket Blazer I have has the passenger side latching thing closer to the edge as opposed to being in the center for the sport buckets. There is a support bracket that I need for my sport bucket Jimmy and the Utility bucket Blazer doesnt have it under the floor.

**ScottH** · 08-28-2003, 11:02 PM

Ok, unfortunately they are the blazer buckets, almost identical to Rod's pic above. Can anyone give me an idea of what the pair including mounting brackets and a center console are worth (driver's seat torn)? I may decide to go back to a bench.

Thanks again to everyone.

Dean · 08-29-2003, 07:28 AM

Does anyone sell replacement foam for the buckets? I'm getting ready to recover mine and I really could use new foam on the driver's side.

08-25-2003, 10:24 PM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Bucket seat question May be buying a 72 which was originally a bench seat truck. PO installed a set of buckets from he believes a 71 truck or blazer. They appear to be sitting lower than a bench would. Should there be certain mounting brackets installed with the buckets for them to sit "normal" height? Any info is appreciated. Thanks!

08-26-2003, 12:22 PM	#4
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	YEP -- JIMS RIGHT ON THE MONEY. I'VE REPLACED SEVERAL BENCH SEATS WITH BUCKETS. & IF YOU USE THE STOCK BUCKET SEAT SLIDES & RISERS OUT OF EITHER A PICKUP OR BLAZER, THEY ARE THE RIGHT HEIGHT. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

08-27-2003, 05:22 AM	#8
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	uh oh! Whats the difference between regular buckets and "utility" buckets. I thought they all had metal backs to them. Thanks, Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

08-27-2003, 08:19 AM	#10
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Dang! I guess that means I will be looking for a set of the sport buckets. The new seat covers I have probably won't fit either. They are houndstooth model. Man. Anybody want to trade for a set of utility buckets? __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

08-27-2003, 12:35 PM	#12
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	Buckets only came from the factory with the scroll vinyl covers...the hounds tooth bucket covers are something the parts suppliers started making __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

08-26-2003, 09:29 AM	#2
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	ttt

08-26-2003, 12:16 PM	#3
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	If they are Blazer seats with Blazer brackets, they will sit at the same height as the bench seats. I would asssume that the truck buckets would sit as high, also. I am not sure what you have. Do you have any pics? Jim

08-26-2003, 09:19 PM	#5
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Thanks very much for the info. Hopefully I'll get the truck over the weekend and take a closer look.

08-26-2003, 11:14 PM	#6
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Did 69 or 70 Blazers come with different looking seats then 71 and 72's? I saw one at a junkyard with metal backs on the seats but I thought all Blazer buckets looked the same.

08-27-2003, 12:37 AM	#7
GMC JUNKIE TOO THE QUICKER FIXERUPER Join Date: Jul 2002 Location: Ok Posts: 615	gee emm I belive the seats with the squareish metal backs were called utility buckets.

08-27-2003, 08:08 AM	#9
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Utility buckets are bigger - more square then the sport buckets. Utility buckets did have metal backs and came in the Blazer/BurbsS--but not the light trucks. Sport buckets had plastic backs in the blazers/burbs but no backs in the trucks. When I put sport buckets into my truck, I used stock, correct truck mounts but was not happy with the "feel" so I put some 2x4 wood blocks under the mounts which raised the seats about 1&3/4 inch. Now the seat backs are slightly higher then the lower section of the rear window metal which allows for the seats to sit back just a bit more. This way I get a little more leg room.

08-27-2003, 12:28 PM	#11
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	One more question......the truck I will be getting is a 72 super cheyenne. If I want to keep it stock looking, should the seats be recovered in houndstooth, or did they also use the plain design on the buckets in a 72 super as well (seats not original to the truck, but would like to keep as original in appearance as I can). Thanks again guys.

08-27-2003, 06:59 PM	#13
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	What about the plaid seat covers and the style in my Jimmy, just plain perforated black, they don't have any scroll.

08-27-2003, 10:58 PM	#14
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	There were four available highland trim seat patterns for buckets in Blazers and Suburbans in 72... 71 I think so also.. Metal back auxilary bucket seat were available in all year Blazers. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

08-27-2003, 11:03 PM	#15
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Also 69-70 truck sub/ blazer / buckets had one scroll and 71-72 truck/ blazer sub/ buckets had 2 scrolls. If they had the sport bucket option... A50. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.



Register or Log In To remove these advertisements.

08-27-2003, 11:08 PM	#16
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Anybody know if the seat covers I have will fit the utility buckets? They are houndstooth style. How much bigger are the utility seats anyway? __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

08-27-2003, 11:22 PM	#17
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	The utility buckets are quite a bit bigger, maybe 6 inches wider then the sport buckets.

08-27-2003, 11:25 PM	#18
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	truck type buckets same as blazer except for mounting of passenger side... so No the two type seat covers wont interchange. Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

08-27-2003, 11:25 PM	#19
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Metal back Blazer seats. Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

08-27-2003, 11:33 PM	#20
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Anyone know of a set of sport buckets for sale or trade? __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

08-28-2003, 10:02 AM	#21
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Wow great info guys thanks, and the pics are really appreciated. BTW I noticed someone on the board referencing floorpans from a truck with buckets. Is the only difference in the floor pan the bolt holes for the brackets, or were there other changes between a bench vs bucket truck floorpan?

08-28-2003, 10:09 AM	#22
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	The floorpan is the same with all seat configurations. The bucket equipped trucks had a different bolt hole location and reenforcement brackets welded to underside of cab. It's an easy swap to put in OE 69-72 buckets in place of your bench...and it's a CPNE approved upgrade! __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

08-28-2003, 07:05 PM	#23
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Actually the utilility bucket Blazer I have has the passenger side latching thing closer to the edge as opposed to being in the center for the sport buckets. There is a support bracket that I need for my sport bucket Jimmy and the Utility bucket Blazer doesnt have it under the floor.

08-28-2003, 11:02 PM	#24
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Ok, unfortunately they are the blazer buckets, almost identical to Rod's pic above. Can anyone give me an idea of what the pair including mounting brackets and a center console are worth (driver's seat torn)? I may decide to go back to a bench. Thanks again to everyone.

08-29-2003, 07:28 AM	#25
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	Does anyone sell replacement foam for the buckets? I'm getting ready to recover mine and I really could use new foam on the driver's side.

Register or Log In To remove these advertisements.