|
|
|
03-16-2015, 01:49 PM
|
#1 |
|
Senior Member
 
Join Date: Mar 2014
Location: Toano, VA
Posts: 893
|
Parking Brake Problem
I recently installed a 3/5 drop on my '70 and during the rear drop I went ahead and replaced my rear brakes, about 95% of the hardware was replaced with new original replacement parts.
Before drop, the parking brake worked great, held the truck in place relatively well, but now it doesn't really hold the truck at all. Parking brake all the way to the floor and just about nothing. There is drag in the rear brakes, the wheels can still turn with a good push (on jacks) but have drag, like I'd imagine they should. Anyone else had this problem? Is it with the new drop that the cable cant get enough tension?
__________________
"Sometimes I do serve as a good bad example. Glad to be of service." My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809 |
|
|
|
03-16-2015, 02:23 PM
|
#2 |
|
Registered User
Join Date: Jul 2010
Location: MD
Posts: 1,937
|
Re: Parking Brake Problem
Very possible the drop caused a distance change creating more cable slack. Have you tried tightening the adjustment where the single pedal cable meets the duals?
|
|
|
|
 |
| Bookmarks |
| Tags |
| 1970, drop, drum, parking brake |
|
|
Hybrid Mode
