DFW guys who to use for C Notch? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ItsNotABlazer · 08-27-2003, 09:48 PM

Anyone in DFW area that is good with a plasma cutter and welder who care to do a c notch for me?

Individual or shop will be ok. I have a guy here who said he can do it but I would prefer someone who has done this stuff before and knows what he is doing.

Brad

phantom dually · 08-27-2003, 10:02 PM

Are you going with a big notch or just a c notch in the lower part of the frame?? If you are just doing a small notch you dont need a plasma. For that matter a sawzall and a welder will be all you need for either.

SCOTI · 08-27-2003, 10:10 PM

Stoked Out Specialties in Rockwall. I'm not sure how competitive their pricing is.... but the peace of mind from a quality standpoint is always worth it.

BaggedC10 · 08-27-2003, 10:12 PM

www.FSCustoms.com and talk to "fiveeightchevy" on this board.

**N2TRUX** · 08-28-2003, 12:07 AM

Scoti beat me to the punch. I can highly recommend Stoked Out Specialties in Rockwall. Call Roger (972-772-0146), and get a quote from him. He did a sweet job on my 77...

ItsNotABlazer · 08-28-2003, 08:50 AM

Thanks for the replies guys. I will try to call SOS later and get an estimate. N2Trux looks like he did a great job on yours. I might even look into an airride setup.

Brad

**N2TRUX** · 08-28-2003, 09:12 AM

Brad, they take pride in their work. The shop is rather new, but Roger has been around hot rods for a long time. He has worked at a lot of the well known rod shops in your area, as well as having a small shop that he and a partner built cars and trucks on the side...
Here's a pic showing how they boxed the frame. No bolt in stuff here. Sorry the pic is small....

Izzy · 08-28-2003, 09:16 AM

Quote:

Originally posted by BaggedC10
www.FSCustoms.com and talk to "fiveeightchevy" on this board.

Thanks for the props. We can do the c notch anytime you're ready.

We just got done doing a 4/6 on a 99+ and bags on a 2001 a couple weekends ago.

Also we have a lot of install pics on our club page.

ItsNotABlazer · 08-28-2003, 09:34 AM

fiveeightchevy my 75 Jimmy might be too old for you guys to work from the looks of your rides lol. Where in DFW are you located btw? I am 100 miles NE of it

Brad

Izzy · 08-28-2003, 09:43 AM

Quote:

Originally posted by ItsNotABlazer
fiveeightchevy my 75 Jimmy might be too old for you guys to work from the looks of your rides lol. Where in DFW are you located btw? I am 100 miles NE of it

Brad

Most of the work we've done has been on 88+ but I did the bag setup on my 83 so I think I could handle your blazer.

We're are in Euless at 360 and 183.

08-27-2003, 09:48 PM	#1
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	DFW guys who to use for C Notch? Anyone in DFW area that is good with a plasma cutter and welder who care to do a c notch for me? Individual or shop will be ok. I have a guy here who said he can do it but I would prefer someone who has done this stuff before and knows what he is doing. Brad __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

08-27-2003, 10:02 PM	#2
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Are you going with a big notch or just a c notch in the lower part of the frame?? If you are just doing a small notch you dont need a plasma. For that matter a sawzall and a welder will be all you need for either. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

08-27-2003, 10:10 PM	#3
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,080	Stoked Out Specialties in Rockwall. I'm not sure how competitive their pricing is.... but the peace of mind from a quality standpoint is always worth it. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

08-27-2003, 10:12 PM	#4
BaggedC10 Under construction! Join Date: Aug 2002 Location: NorCal Posts: 1,065	www.FSCustoms.com and talk to "fiveeightchevy" on this board. __________________ 2001 Silverado bagged on 22's. Sold

08-28-2003, 12:07 AM	#5
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Scoti beat me to the punch. I can highly recommend Stoked Out Specialties in Rockwall. Call Roger (972-772-0146), and get a quote from him. He did a sweet job on my 77... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

08-28-2003, 08:50 AM	#6
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	Thanks for the replies guys. I will try to call SOS later and get an estimate. N2Trux looks like he did a great job on yours. I might even look into an airride setup. Brad __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

08-28-2003, 09:12 AM	#7
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Brad, they take pride in their work. The shop is rather new, but Roger has been around hot rods for a long time. He has worked at a lot of the well known rod shops in your area, as well as having a small shop that he and a partner built cars and trucks on the side... Here's a pic showing how they boxed the frame. No bolt in stuff here. Sorry the pic is small.... Attached Images

08-28-2003, 09:34 AM	#9
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	fiveeightchevy my 75 Jimmy might be too old for you guys to work from the looks of your rides lol. Where in DFW are you located btw? I am 100 miles NE of it Brad __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.