You dont need corner windows! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wolffcub · 04-02-2015, 05:19 PM

well that's one way you can use the rear corner windows.

http://www.2040-cars.com/Chevrolet/O...d-truck-81873/

MARTINSR · 04-02-2015, 06:43 PM

Don't get the whole "Rat Rod" movement. He could have saved a lot of money and time by just pouring a few gallons of gas on it and burning it to the ground.

Just an opinion folks, we all have them don't beat me up.

Brian

mdpaulson1 · 04-02-2015, 07:28 PM

So here I am researching heaters for my truck and the answer is so simple, just run the exuast through the cab. Dam, it's brilliant

Hubscrub · 04-02-2015, 08:17 PM

OUCH! that burns

wolffcub · 04-02-2015, 10:53 PM

And I thought I would have a exhaust resonance issue.

Old Crow · 04-03-2015, 10:24 AM

I'm not a big fan, but I've seen a couple that sort of appeal to me. That one is one of 'em(less the grille)and there's another one, a 61-66 built similarly.

Northern lights · 04-03-2015, 10:33 AM

I never could understand the whole "rat rod" or fake "patina" thing. Always seems to me like marrying Valerie Bertinelli, then knocking out a few of her teeth, shaving her head, adding fake zits with makeup and making her wear a fat suit. However, I don't diss those that like it, to each their own. As long as what they have makes them happy, I'm all for it, just not for me.

Softpatch · 04-03-2015, 05:02 PM

this must have been a COE
.
.

Old Crow · 04-04-2015, 06:03 AM

Here, I went and found the other truck I like:

MARTINSR · 04-04-2015, 10:37 AM

I can dig that one, it's kinda cool.

Brian

**mr48chev** · 04-04-2015, 11:10 AM

Low miles on that one because it was too hot inside and the driver developed a distinct hearing loss.

It's well known that I am not a fan of rat rods or rusty "patina" rigs" and have a standing personal rule of not taking photos of rat rods or posting them if I do but I did take this one at the Yakima Vintiques show last year.

Very spendy engine and pretty decent work negates the "I built it because I didn't have any money to spend on a fancy one" nonsense.

MARTINSR · 04-04-2015, 11:49 AM

Quote:

Originally Posted by mr48chev

Low miles on that one because it was too hot inside and the driver developed a distinct hearing loss.

It's well known that I am not a fan of rat rods or rusty "patina" rigs" and have a standing personal rule of not taking photos of rat rods or posting them if I do but I did take this one at the Yakima Vintiques show last year.

Very spendy engine and pretty decent work negates the "I built it because I didn't have any money to spend on a fancy one" nonsense.

Exactly! Like there is a cheap Model A body out there, geeez.

Brian

04-02-2015, 05:19 PM	#1
wolffcub Registered User Join Date: Sep 2013 Location: Edmonton Posts: 348	You dont need corner windows! well that's one way you can use the rear corner windows. http://www.2040-cars.com/Chevrolet/O...d-truck-81873/ __________________ 52 Chev 1300,55 235 40 over, 848 head, dual Edelbrock intake, Fenton headers, CW 32/32 carbs, 251 cam, HEI, T5 Trans, 3.23 rear, 235/75/r15 rubber. If it aint broke I still try to fix it!

04-02-2015, 06:43 PM	#2
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,035	Re: You dont need corner windows! Don't get the whole "Rat Rod" movement. He could have saved a lot of money and time by just pouring a few gallons of gas on it and burning it to the ground. Just an opinion folks, we all have them don't beat me up. Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

04-02-2015, 07:28 PM	#3
mdpaulson1 Registered User Join Date: Feb 2015 Location: concord ca Posts: 170	Re: You dont need corner windows! So here I am researching heaters for my truck and the answer is so simple, just run the exuast through the cab. Dam, it's brilliant

04-02-2015, 08:17 PM	#4
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: You dont need corner windows! OUCH! that burns __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14

04-02-2015, 10:53 PM	#5
wolffcub Registered User Join Date: Sep 2013 Location: Edmonton Posts: 348	Re: You dont need corner windows! And I thought I would have a exhaust resonance issue. __________________ 52 Chev 1300,55 235 40 over, 848 head, dual Edelbrock intake, Fenton headers, CW 32/32 carbs, 251 cam, HEI, T5 Trans, 3.23 rear, 235/75/r15 rubber. If it aint broke I still try to fix it!

04-03-2015, 10:24 AM	#6
Old Crow Registered User Join Date: Nov 2012 Location: Fox, AR Posts: 394	Re: You dont need corner windows! I'm not a big fan, but I've seen a couple that sort of appeal to me. That one is one of 'em(less the grille)and there's another one, a 61-66 built similarly. __________________ Old Crow '54 Chevy Panel, '00 Bounder 36S, '95 Jeep YJ

04-03-2015, 10:33 AM	#7
Northern lights Registered User Join Date: Jul 2009 Location: Whitemud Alberta Posts: 328	Re: You dont need corner windows! I never could understand the whole "rat rod" or fake "patina" thing. Always seems to me like marrying Valerie Bertinelli, then knocking out a few of her teeth, shaving her head, adding fake zits with makeup and making her wear a fat suit. However, I don't diss those that like it, to each their own. As long as what they have makes them happy, I'm all for it, just not for me.

04-03-2015, 05:02 PM	#8
Softpatch Registered User Join Date: Sep 2013 Location: Vashon WA Posts: 969	Re: You dont need corner windows! this must have been a COE . . __________________ My Spelling is Not Incorrect...It's 'Creative' . . 1966 C-20 .....Swap 91 G-30(5.7 FI)/4L80E http://67-72chevytrucks.com/vboard/s...d.php?t=789617 59 Viking Revival .. http://67-72chevytrucks.com/vboard/s...d.php?t=632341

04-04-2015, 06:03 AM	#9
Old Crow Registered User Join Date: Nov 2012 Location: Fox, AR Posts: 394	Re: You dont need corner windows! Here, I went and found the other truck I like: __________________ Old Crow '54 Chevy Panel, '00 Bounder 36S, '95 Jeep YJ

04-04-2015, 10:37 AM	#10
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,035	Re: You dont need corner windows! I can dig that one, it's kinda cool. Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

04-04-2015, 11:10 AM	#11
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,824	Re: You dont need corner windows! Low miles on that one because it was too hot inside and the driver developed a distinct hearing loss. It's well known that I am not a fan of rat rods or rusty "patina" rigs" and have a standing personal rule of not taking photos of rat rods or posting them if I do but I did take this one at the Yakima Vintiques show last year. Very spendy engine and pretty decent work negates the "I built it because I didn't have any money to spend on a fancy one" nonsense. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.