Gettin er done - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FRENCHBLUE72 · 08-31-2003, 08:34 PM

Gonna strip out the interior and dupilcolor bedliner it monday. Hopefully I will get the interior done before winter get's here.. Today I replaced all the heater control's,heater core,blower motor and restior's just need the heater duct's for defrost.

FRENCHBLUE72 · 08-31-2003, 08:37 PM

Pic two

FRENCHBLUE72 · 08-31-2003, 08:39 PM

3RD PIC

FRENCHBLUE72 · 08-31-2003, 08:42 PM

Last one for today.

1970blazin · 08-31-2003, 10:04 PM

What is duplicolor bedliner? Is it like Rattleguard? Post some pics as you do it or when it is done. I am going to Line-x the interior and bed of my blazer, but it is so much $$, I am thinking I might want to do something a little bit cheaper if it has good results. Let us know! Lots of pics!!

FRENCHBLUE72 · 09-01-2003, 03:55 PM

rear area stripped out of seat's and stereo.. The stuff in the can is duplicolor... Are the plate's welded to the floor stock???? The plate's were actually welded and then bondoed smooth to the floor?????

1970blazin · 09-01-2003, 07:59 PM

All the ones I've seen are welded to the floor. Lookin' good!

*Phillip Johnson* · 09-01-2003, 09:16 PM

Pass on Line X.. They screwed up my Dodge Cummins so bad I sold the truck. Chipped, pealed, discolored. $500 and a POS bed. I made good when I traded it in. i put a plastic bedliner over it. My advice to everyone is STAY AWAY FROM LINE X. They dont stand behind their product. Lifetime warranty is only good until it fails. Then they say that the life must be over. For the record, it was the LINE X dealer in CHICO Calif..Owner Dave Pierce.. A real stand up guy....NOT!

FRENCHBLUE72 · 09-01-2003, 11:48 PM

Stripped all the old paint off the green paint must have been made from kriptonite cause it was use'in up the flap disk's on the grinder..Cleaned the bed with degreaser(thinner) and went for it..

FRENCHBLUE72 · 09-01-2003, 11:51 PM

Used the duplicolor in a spray can to make sure I got all the knook's and cranny's. Also make sure that you tape up all hole's you want to put bolt's in,cause it is a pain to get this stuff off..

FRENCHBLUE72 · 09-01-2003, 11:54 PM

Here is the professional liner roller.. Real easy to do and it only take's an hour to dry.

FRENCHBLUE72 · 09-01-2003, 11:55 PM

Done this pic is front to rear.

FRENCHBLUE72 · 09-01-2003, 11:58 PM

And rear to front.. This is 2 coat's .. Teusday I will go over and make sure I did not miss any spot's. It was getting dark and light was miminal so I prob missed some spot's.

NuBomb · 09-02-2003, 12:39 AM

Looking Good. I have decided to just paint my interior instead of using the bedliner stuff. Yours is looking really good though. I can't wait till I can show some progress pics. Seeing people getting things done on their's makes me want to get to work.

HatGuy · 09-02-2003, 08:47 AM

You are an inspration.

VTKidder · 09-02-2003, 09:39 AM

That's one stylin' driver seat!! Looks like a real low-riding lean-backer.

1970blazin · 09-02-2003, 12:07 PM

That looks great! Nice job!! Well worth it eh? I can't seem to talk my husband out of Line-x, I think we could do a good job with something like you went with. Oh welll its just $$ right

**Yukon Jack** · 09-03-2003, 02:04 PM

Looks really good!

08-31-2003, 08:34 PM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Gettin er done Gonna strip out the interior and dupilcolor bedliner it monday. Hopefully I will get the interior done before winter get's here.. Today I replaced all the heater control's,heater core,blower motor and restior's just need the heater duct's for defrost. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-31-2003, 08:37 PM	#2
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Pic two Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-31-2003, 08:39 PM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	3RD PIC Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-31-2003, 08:42 PM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Last one for today. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-31-2003, 10:04 PM	#5
1970blazin Blazerless:-( Join Date: Jun 2003 Location: Olympia WA Posts: 1,612	What is duplicolor bedliner? Is it like Rattleguard? Post some pics as you do it or when it is done. I am going to Line-x the interior and bed of my blazer, but it is so much $$, I am thinking I might want to do something a little bit cheaper if it has good results. Let us know! Lots of pics!! __________________ 1970blazin 1970 CST Blazer-Orig. Dark Blue-SOLD Progress Pics of Blazer for sale

09-01-2003, 03:55 PM	#6
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	rear area stripped out of seat's and stereo.. The stuff in the can is duplicolor... Are the plate's welded to the floor stock???? The plate's were actually welded and then bondoed smooth to the floor????? Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-01-2003, 07:59 PM	#7
1970blazin Blazerless:-( Join Date: Jun 2003 Location: Olympia WA Posts: 1,612	All the ones I've seen are welded to the floor. Lookin' good! __________________ 1970blazin 1970 CST Blazer-Orig. Dark Blue-SOLD Progress Pics of Blazer for sale

09-01-2003, 09:16 PM	#8
Phillip Johnson Account Suspended Join Date: Apr 2000 Location: Grants Pass, Oregon Posts: 1,579	Pass on Line X.. They screwed up my Dodge Cummins so bad I sold the truck. Chipped, pealed, discolored. $500 and a POS bed. I made good when I traded it in. i put a plastic bedliner over it. My advice to everyone is STAY AWAY FROM LINE X. They dont stand behind their product. Lifetime warranty is only good until it fails. Then they say that the life must be over. For the record, it was the LINE X dealer in CHICO Calif..Owner Dave Pierce.. A real stand up guy....NOT!

09-01-2003, 11:48 PM	#9
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Stripped all the old paint off the green paint must have been made from kriptonite cause it was use'in up the flap disk's on the grinder..Cleaned the bed with degreaser(thinner) and went for it.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-01-2003, 11:51 PM	#10
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Used the duplicolor in a spray can to make sure I got all the knook's and cranny's. Also make sure that you tape up all hole's you want to put bolt's in,cause it is a pain to get this stuff off.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-01-2003, 11:54 PM	#11
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Here is the professional liner roller.. Real easy to do and it only take's an hour to dry. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-01-2003, 11:55 PM	#12
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Done this pic is front to rear. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-01-2003, 11:58 PM	#13
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	And rear to front.. This is 2 coat's .. Teusday I will go over and make sure I did not miss any spot's. It was getting dark and light was miminal so I prob missed some spot's. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-02-2003, 12:39 AM	#14
NuBomb Registered User Join Date: Jan 2002 Location: Canton, Georgia, USA Posts: 1,119	Looking Good. I have decided to just paint my interior instead of using the bedliner stuff. Yours is looking really good though. I can't wait till I can show some progress pics. Seeing people getting things done on their's makes me want to get to work. __________________ Jeremy (NUBOMB) 72K5 CST 350/350/205 1951 Chevy 1/2 ton North Georgia Group "... And the first rule to being a man is you gotta spend your life doing crap you don't wanna do." Red Forman.

09-02-2003, 08:47 AM	#15
HatGuy Registered User Join Date: Aug 2003 Location: Fort Worth Texas Posts: 275	You are an inspration. __________________ Joe Peters the HatGuy 72' K5 Highlander My Daily Driver http://www.pbhats.com/BLAZER/index.html



Register or Log In To remove these advertisements.

09-02-2003, 09:39 AM	#16
VTKidder Registered User Join Date: May 2003 Location: Vermont Posts: 996	That's one stylin' driver seat!! Looks like a real low-riding lean-backer.

09-02-2003, 12:07 PM	#17
1970blazin Blazerless:-( Join Date: Jun 2003 Location: Olympia WA Posts: 1,612	That looks great! Nice job!! Well worth it eh? I can't seem to talk my husband out of Line-x, I think we could do a good job with something like you went with. Oh welll its just $$ right __________________ 1970blazin 1970 CST Blazer-Orig. Dark Blue-SOLD Progress Pics of Blazer for sale

09-03-2003, 02:04 PM	#18
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Looks really good! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

Register or Log In To remove these advertisements.