|
|
|
06-24-2015, 08:56 PM
|
#1 |
|
Registered User
Join Date: Dec 2011
Location: Royal Oak, Michigan
Posts: 193
|
Rack/pinion problem
I sectioned my cross member two inches. Another member said he used a rack from a 00 Dakota. I picked one up and it lays on top of the lower control arms and about a half inch from the pulley
|
|
|
|
06-28-2015, 01:59 PM
|
#2 |
|
Senior Member
 
Join Date: May 2014
Location: Vancouver, BC
Posts: 591
|
Re: Rack/pinion problem
Someone who knows more will probably answer this but don't you need a notch in your frame to clear the R&P?
__________________
Kitsbeach (Ken) 1967 C10 LWB (now SWB) Fleetside 6cyl Saginaw three-on-the-tree "No Frills" 1980 C20 Long to short & static drop "Square One" |
|
|
|
|
06-28-2015, 02:25 PM
|
#3 |
|
Registered User
Join Date: Feb 2009
Location: slurrey, bc.
Posts: 1,134
|
Re: Rack/pinion problem
move it infront of the pulley?
__________________
-'73 c/10 - Low with Go - will be complete... probably never. -'90 2wd Blazer - well... soon enough anyways. -'84 SWB - the daily gas guzzler. |
|
|
|
|
06-28-2015, 03:21 PM
|
#4 |
|
Registered User
Join Date: Mar 2013
Location: Lakeside, Ca.
Posts: 320
|
Re: Rack/pinion problem
im using a rack from an 88 thunderbird. i sectioned the front of my cross member back about an inch to line everything up
 
__________________
Project Roxy... Shes Bad, Low, and Blown... http://67-72chevytrucks.com/vboard/s...d.php?t=673333 |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
