|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-02-2015, 05:05 PM
|
#1 |
|
Registered User
Join Date: Mar 2015
Location: queen creek, az
Posts: 39
|
Need a quick answer, power steering box
I have an unexpected chance to run to the salvage yard going to start getting parts for my power steering swap can anybody confirm the size of the big nut on the power steering box. I'll be looking at 70-80's trucks
|
|
|
|
07-02-2015, 07:38 PM
|
#2 |
|
Registered User
 
Join Date: Jul 2007
Location: New River Arizona
Posts: 1,180
|
Re: Need a quick answer, power steering box
If you are referring to the big nut on the steering box I am pretty sure it is a 1 1/4 inch nut but why would you not take it off at the pitman arm? Pull the cotter pin and remove the nut even an adjustable will pull it off and smack the side of the arm and you can get it off without a pickle fork.
|
|
|
|
|
07-02-2015, 10:34 PM
|
#3 |
|
Registered User
Join Date: Mar 2015
Location: queen creek, az
Posts: 39
|
Re: Need a quick answer, power steering box
Yes thank you, I realized this shortly after my question.
|
|
|
|
|
07-02-2015, 11:32 PM
|
#4 |
|
Registered User
Join Date: Sep 2013
Location: Vashon WA
Posts: 969
|
Re: Need a quick answer, power steering box
I got my set up off 1971 C-10 don't recall having to change the pitman arm
went on a 63 C-10. I did have to use a spacer on one or two of the frame bolts and make a bracket for the other
__________________
My Spelling is Not Incorrect...It's 'Creative' . . 1966 C-20 .....Swap 91 G-30(5.7 FI)/4L80E http://67-72chevytrucks.com/vboard/s...d.php?t=789617 59 Viking Revival .. http://67-72chevytrucks.com/vboard/s...d.php?t=632341 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
