|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-02-2015, 09:33 PM
|
#1 |
|
Registered User
 Join Date: Feb 2015
Location: Belmont Ontario Canada
Posts: 418
|
63 Control Arms to 73-87 Spindles, Finally!
Hey guys here's the part numbers you need....
Upper BJ k6186 moog # Lower BJ 505-1021OS Raybestos (tacked in and lip hammered in a bit) Outer Tie Rod Es409RT Inner Tie Rod ES323L Sleeve from POL OR ECE to match the rods. This will work very good if you happen to have 73-87 spindles lying around or the ECE group has spindles that match the 63 ball joint tapers... The Control Arm alignment hole goes to the front on my 63 here is the final result with 3" drop spindles and 1" drop springs ...also new larger LCA u bolts. |
|
|
|
07-02-2015, 10:07 PM
|
#2 |
|
Registered User
Join Date: Jan 2013
Location: Columbia, SC
Posts: 1,927
|
Re: 63 Control Arms to 73-87 Spindles, Finally!
Are 1963 control arms different than 1964-66? I always thought they were the same. Kudos to you for sharing the info and part numbers. I just wanna know if the same parts can be used for 1964-66 1/2T trucks.
__________________
My 65 C10 build: www.lugnutz65chevystepside.weebly.com Want to know more about T5 transmissions? My website has a T5 Info Page and a Step by Step T5 rebuild. |
|
|
|
|
07-02-2015, 10:10 PM
|
#3 |
|
Registered User
Join Date: Feb 2015
Location: Belmont Ontario Canada
Posts: 418
|
Re: 63 Control Arms to 73-87 Spindles, Finally!
I am pretty sure that 63-66 are the same...easy way to confirm is if the original ball joint numbers match then they are the same...
|
|
|
|
|
07-02-2015, 10:52 PM
|
#4 |
|
Registered User
Join Date: May 2010
Location: Clinton township, MI
Posts: 1,192
|
Re: 63 Control Arms to 73-87 Spindles, Finally!
Great information. Thanks for sharing.
__________________
It only has original paint once |
|
|
|
|
07-03-2015, 12:08 AM
|
#5 |
|
60-66 Nut
 Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: 63 Control Arms to 73-87 Spindles, Finally!
The '63-'70 C10 control arms are the same.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
07-03-2015, 07:12 AM
|
#6 |
|
Registered User
Join Date: Feb 2015
Location: Belmont Ontario Canada
Posts: 418
|
Re: 63 Control Arms to 73-87 Spindles, Finally!
Thanks Captain!
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
