The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-06-2015, 12:38 PM   #1
j.rigby15r
Registered User
 
j.rigby15r's Avatar
 
Join Date: May 2014
Location: Newport News VIRGINIA
Posts: 360
best way to get a 64 as low as possible on the easy.

So I'm getting ready to do some serious work on my 64 long fleet. I am going to start off by switching to power disc, at least fronts haven't decided if I will keep drums on the back. While doing so I wavy to get her as low to the ground as possible while maintaining drivability. I'm planning on 2.5 drop spindles and 2"drop springs in the front and c notch the back with 5" and possible blocks. From what I've seen I don't think that will get my c10 as low as I want. I've started reading about a z frame. What is a Z frame? What is the difference between a c notch and a z? I've also seen guys swap the front cross member why? What is the easiest way to get low? I know everyone has their opinion and I want to hear them and why they chose what that did and how much it ran them. Pic would be helpful to, I'm new to this stuff so please keep it simple. Thank you.
j.rigby15r is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:14 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com