|
07-06-2015, 02:13 PM
|
#1 |
|
Registered User
Join Date: Apr 2011
Location: Cleveland, Ohio
Posts: 293
|
VSS wiring
Hey guys Im working on wiring up my nv3500's speed sensor, which is a 2 pin sensor, pretty sure they're magnetic. From my understanding 1 pin is ground and the other pin is the signal? Or is 1 pin Low reference and the 2nd pin signal?
I'm just not sure If I need to use Pin 20 on the Red connector (c2 99-02 engines) which is the reference Low for a VSS. Then pin 21 would be the actual signal from the speed sensor. OR Do I just ground 1 pin on the sensor and just run my signal wire. Also does orientation matter or can I have the wires go to either pin on the sensor?
__________________
1980 C10 SWB Yukon 5.3/5 speed 3.73 gears. |
|
|
|
07-06-2015, 05:17 PM
|
#2 |
|
Registered User
Join Date: Aug 2013
Location: Tecumseh
Posts: 355
|
Re: VSS wiring
Either to 20 and 21 will work.
__________________
Current project 1959 Willys = GEZR TRUK Geezer is a Latin compound word made up of two roots. Gee meaning Urine Stain and Zer meaning your pants are open! FMCDH GBU and GBA http://www.youtube.com/user/aknovaman/videos |
|
|
|
|
07-07-2015, 01:59 AM
|
#3 |
|
Registered User
Join Date: Apr 2011
Location: Cleveland, Ohio
Posts: 293
|
Re: VSS wiring
delete
|
|
|
|
|
07-07-2015, 02:00 AM
|
#4 | |
|
Registered User
Join Date: Apr 2011
Location: Cleveland, Ohio
Posts: 293
|
Re: VSS wiring
Quote:
__________________
1980 C10 SWB Yukon 5.3/5 speed 3.73 gears. |
|
|
|
|
|
07-07-2015, 02:43 AM
|
#5 |
|
Registered User
Join Date: Apr 2012
Location: Vegas
Posts: 617
|
Re: VSS wiring
I have a manual and had my tuner delete VSS with no issues.
|
|
|
|
|
07-07-2015, 03:47 PM
|
#6 | |
|
Registered User
Join Date: Apr 2011
Location: Cleveland, Ohio
Posts: 293
|
Re: VSS wiring
Quote:
__________________
1980 C10 SWB Yukon 5.3/5 speed 3.73 gears. |
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
