cpp caliper question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nordic · 07-08-2015, 07:28 PM

On my 1958 I used CPP 6lug disc brake conversion, I need to replace the left caliper and there is no numbers or casting marks, Does any one know a part number for a replacement? I do not want to order an other one from CPP,

Thanks,
Nordic

**Jurassic-1** · 07-08-2015, 08:28 PM

There are 2 designs commonly used the newer one is from an 85-90ish S10 it is not as long as the other which is 71-87 Fullsize chevy truck. The caliper is a bit larger. You should take it to the parts store and with the above mentioned it will be no problem matching it up.

roger55 · 07-09-2015, 11:46 PM

Quote:

Originally Posted by Jurassic-1

There are 2 designs commonly used the newer one is from an 85-90ish S10 it is not as long as the other which is 71-87 Fullsize chevy truck. The caliper is a bit larger. You should take it to the parts store and with the above mentioned it will be no problem matching it up.

I have that kit. It's the one for the full size chevy truck.

**Jurassic-1** · 07-11-2015, 06:53 PM

Did you find a caliper?

roger55 · 07-11-2015, 07:07 PM

Quote:

Originally Posted by Jurassic-1

Did you find a caliper?

All the discount Auto Parts stores keep those in stock.

Nordic · 07-11-2015, 08:24 PM

Yes Advance auto 1972 chevy pickup caliper

Thank for the info.

OrrieG · 07-11-2015, 08:26 PM

Make sure you get the correct side with the bleeder on the top. They will fit either way, but almost impossible to bleed with the bleeder on the bottom. I know from experience....

**Jurassic-1** · 07-11-2015, 10:43 PM

Yes I agree and there should be a L and R molded into it.

07-08-2015, 07:28 PM	#1
Nordic Registered User Join Date: Jun 2011 Location: Unionville CT Posts: 168	cpp caliper question On my 1958 I used CPP 6lug disc brake conversion, I need to replace the left caliper and there is no numbers or casting marks, Does any one know a part number for a replacement? I do not want to order an other one from CPP, Thanks, Nordic __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=481531

07-08-2015, 08:28 PM	#2
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: cpp caliper question There are 2 designs commonly used the newer one is from an 85-90ish S10 it is not as long as the other which is 71-87 Fullsize chevy truck. The caliper is a bit larger. You should take it to the parts store and with the above mentioned it will be no problem matching it up.

07-11-2015, 06:53 PM	#4
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: cpp caliper question Did you find a caliper?

07-11-2015, 08:24 PM	#6
Nordic Registered User Join Date: Jun 2011 Location: Unionville CT Posts: 168	Re: cpp caliper question Yes Advance auto 1972 chevy pickup caliper Thank for the info. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=481531

07-11-2015, 08:26 PM	#7
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: cpp caliper question Make sure you get the correct side with the bleeder on the top. They will fit either way, but almost impossible to bleed with the bleeder on the bottom. I know from experience.... __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

07-11-2015, 10:43 PM	#8
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: cpp caliper question Yes I agree and there should be a L and R molded into it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.