|
07-25-2015, 09:06 PM
|
#1 |
|
Registered User
Join Date: Feb 2014
Location: Mukwonago, WI
Posts: 268
|
bumper guard bolts?
I took off the bumper guards from the bumper i just bought. 1 bolt on the bottom is already snapped and the carriage bolt holes at the top are stripped. Anyone know how to replace the bottom bolt and fix the carriage bolt hole?
|
|
|
|
07-25-2015, 09:14 PM
|
#2 |
|
Registered User
Join Date: Feb 2014
Location: Mukwonago, WI
Posts: 268
|
Re: bumper guard bolts?
only ideas i had were to drill out bottom hole and find a replacement bolt. not sure what would fit in that hole though.
|
|
|
|
|
07-25-2015, 09:38 PM
|
#3 |
|
Post Whore
  
Join Date: May 2015
Location: Alabama
Posts: 14,674
|
Re: bumper guard bolts?
You could weld up the carriage bolt slot and then file/grind it back in shape...the other drill/heat/easeout or drill and tap
|
|
|
|
|
07-25-2015, 09:47 PM
|
#4 |
|
Registered User
Join Date: Feb 2014
Location: Mukwonago, WI
Posts: 268
|
Re: bumper guard bolts?
wouldnt welding damage the chrome?
|
|
|
|
|
07-25-2015, 10:10 PM
|
#5 |
|
Registered User
Join Date: Feb 2012
Location: Beautiful BC, Canada, eh?!
Posts: 2,284
|
Re: bumper guard bolts?
I had the same thing. Apparently this is common.
I used a 1/16" cutting disc on a grinder and cut the bracket out, leaving about 1/4" of the ends still attached to the sides of the bumper guard. Then I drilled the broken stud out, and welded a bolt on the back side. Sprayed it with weldable primer and re-attached the bracket piece thingie. Leaving the 1/4" on the sides keeps the welding heat away from the chrome.
__________________
1961 Apache: "Grabber Orange" Shortboxed, pancake, step-notch, air-ride, turbo, LS 1977 Silverado: Shortboxed & dropped, potato-potato V8 Pontiac Firefly (Chevy Sprint): The ultimate engine swap: 5.7L in a 1.0L bag Lotus Super 7 Replica: Scratch-built street-legal rollerskate |
|
|
|
07-25-2015, 11:22 PM
|
#6 |
|
Registered User
Join Date: Feb 2014
Location: Mukwonago, WI
Posts: 268
|
Re: bumper guard bolts?
sounds easy enough
|
|
|
|
|
07-26-2015, 12:50 AM
|
#7 |
|
Post Whore
Join Date: May 2015
Location: Alabama
Posts: 14,674
|
Re: bumper guard bolts?
Yes welding will damage chrome...but the slot your welding up can't be seen..just grind off chrome plate and weld,, then spray with some good primer..some one at some time or other hooked a chain to one of mine and pulled sideways on it..you can only imagine what it looked like...after I fixed it you can hardly tell it..
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
