|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-26-2015, 03:20 PM
|
#1 |
|
Registered User
Join Date: Dec 2014
Location: Virginia Beach, Va.
Posts: 7
|
63 C10 Brake line routing
Hi everyone!! I recently purchased a pre-bent brake line kit from Fine Lines and it appears that the master cylinder line isn't even close!! Keep in mind I'm using the stock m/c and stock drum/drum brakes.
Can anyone provide some pictures of their master cylinder line as well as the routing of said line? Thanks!! Eric
__________________
Eric Morris Retired Navy Chief RM '63 C10 |
|
|
|
07-26-2015, 08:18 PM
|
#2 |
|
Registered User
Join Date: Jan 2014
Location: Wasilla Alaska
Posts: 537
|
Re: 63 C10 Brake line routing
I guess I don't have a pic of a stock line but it just drops out of the master cly, down to the frame rail. then inside the frame rail to a tee
|
|
|
|
|
07-26-2015, 08:37 PM
|
#3 |
|
Registered User
Join Date: Dec 2014
Location: Virginia Beach, Va.
Posts: 7
|
Re: 63 C10 Brake line routing
This is the master cylinder I have. The line is pretty much a straight drop to the "T" connector. The one Fine Lines sent looks NOTHING like it.
__________________
Eric Morris Retired Navy Chief RM '63 C10 |
|
|
|
|
07-26-2015, 08:44 PM
|
#4 |
|
Registered User
Join Date: Dec 2014
Location: Virginia Beach, Va.
Posts: 7
|
Re: 63 C10 Brake line routing
The bottom line on this picture is more like the one they sent and according to their website...is the correct one....I'm lost!!
__________________
Eric Morris Retired Navy Chief RM '63 C10 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
