custom deluxe 20 suburban parts (list cheap!) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*gn4u2c* · 09-08-2003, 09:32 AM

rear 14 bolt $100.00
4 speed trans $100.00 with pedals bell clutch flywheel rods driveshaft cross menber $150.00 all works good.
glass $5.00 each any (windsheild gone) all other is good.
blue vinal 3rd row rear seat no rips or holes. $10.00
454 bb front springs 2wd $10.00
front seat tan vinal dirty but not torn up. $5.00
wiper motor $5.00
non ac heater box setup controls and all $20.00
non power steering gearbox. $10.00
side pipe exhaust ( sounds very cool) $25.00 both sides !!!!
complete -engine lots of goos stuff make an offer come take it off !!
come pick up the parts !! 17329 zip e-me at gn4u2c@hotmail.com for directions

**MJN** · 09-08-2003, 12:51 PM

does that sm465 have the chrome shift handle? if so would you separate it?

*gn4u2c* · 09-08-2003, 02:11 PM

the rod is crome the ball is black

**MJN** · 09-08-2003, 08:11 PM

would you separate it from the tranny?

**crossy** · 09-09-2003, 05:06 AM

Jason is that tan seat a bucket or a complete bench? DAVE

Did any of you other guys catch the fact that this had NON power steering ??? in a C20 . musta had arms like hulk hogan back in his roid use days :-)

*gn4u2c* · 09-09-2003, 09:13 AM

I did not want to seperate the rod ....give me a week if I don't sell the whole thing I will.
bench seat .

Yes !! c20 suburban with manual steering !!

**crossy** · 09-09-2003, 12:14 PM

did you misprint the price or is that really $5 cuz I'm all over a good seat for $5 :-) , DAVE

*gn4u2c* · 09-09-2003, 02:24 PM

not a misprint !!.. I don't need the seat ... I get satisfaction knowing people got a good deal.

junkyardpartseeker · 09-10-2003, 02:18 PM

Can you pull the custom deluxe 20 fender emblems?

I have a friend down here who is needing one with both studs intact.

Tommy Davis

*gn4u2c* · 09-10-2003, 08:56 PM

yes i can send me $10.00 and a shipping address.
e-me for info.

*gn4u2c* · 09-11-2003, 02:00 PM

I have parts listed here dirt cheep !! I am really pissed that someone came to my house and had the nerve to steal parts out of the suburban...... I only had it advertised here ,so whoever you are just fell shame!!! nothing else you are a bad person.....and dam lucky I was not around.

BigRed · 09-11-2003, 02:05 PM

How would anybody know where the parts are? Unless you told somebody the address, I'd have a hard time beliveing somebody from this board stole the parts.

*gn4u2c* · 09-11-2003, 02:16 PM

could be someone else ... It's just sitting in my driveway lots of stuff laying inside well used to be.. I kind of ruled out neighborhood people because I live in the country and they took the freggin radio speakers front seat and 2 rally wheels

BigRed · 09-11-2003, 02:30 PM

I HATE thiefs!!!!!!! There's no room in this world for them. I hope you can find out who did this to you. It's not right.

junkyardpartseeker · 09-11-2003, 02:33 PM

I agree with BigRed. They put out a warning last nite here on the news for everyone to start locking up ATV's, small trailers, riding and push lawnmowers. There is a rash of these missing here within the last few days. The theft rings will be popping up all over the place here now until the government does something to help the economy and stop them from taking our jobs overseas.

Tommy

**crossy** · 09-11-2003, 05:37 PM

Oh man my $5 seat is gone! . It sucks when that happens but I have been advertising on this forum for much longer than you and there are only about 6 people on this forum that even live close enough to 'come get it' . with the popularity of the 73-87s though as cheap daily drivers now everyone who owns a beater is trying to scrounge cheap parts . I guess it's also possible that someone saw it in their eye as destined for the scrap yard so they should help themselves. Still sucks though. I used to keep a truck or two in a very remote area of P-ville here and it was in a locked, fenced in area and still people were helping themselves,someone even took the time to unbolt a three speed to steal the shifter from it . sorry about that happening but I can nearly guarantee it was no one from here. , DAVE

kennyw · 09-11-2003, 06:40 PM

Do you still have the Custom Deluxe 20 fender badges? I would be interested in them if you still have them.

junkyardpartseeker · 09-11-2003, 06:43 PM

I already bought the fender badges.

Tommy Davis

*gn4u2c* · 09-12-2003, 08:52 AM

and They are boxed up and ready to ship !!

**old Rusty C10** · 09-15-2003, 11:18 AM

just a word of thanks to jason here he is a gentleman and a great guy to do business with met him sunday 9/14 and had a great time scavenging this truck for parts
this is one of the good guys on the board!

junkyardpartseeker · 09-17-2003, 12:42 PM

The emblems arrived today. Shipped in a envelope??? Both arrived broke, and the mounting studs were even broke off when taking them off. You emailed me that nothing was broke on them and that is why I bought them.

At least I have a good reputation of properly packaging my items, and insuring that they aren't broke when I pull them off vehicles.

Tommy Davis

78SilveradoSWB · 09-17-2003, 02:52 PM

Quote:

Originally posted by gn4u2c
and They are boxed up and ready to ship !!

Whenever I say boxed up, it's suppose to be in a box, not an envelope. Tommy, was the envelope cushion or was it just a plain old manila one?

junkyardpartseeker · 09-17-2003, 04:09 PM

It was in one of those USPS priority envelopes that you would mail letters to that are paper size. That was rediculious.

I emailed him and told him I need the studs not broke, and I have it stating "they are NOT broken".

I ship everything in boxes, no matter what it is.

Tommy

78SilveradoSWB · 09-17-2003, 05:43 PM

Gee, I hope he refunds all your money. He should have used one of those small priority mail cardboard boxes, the size of a VHS cassette instead of the envelope. Both are free of charge at the post office stored right next to each other, and the postage is the same whether you use the envelope or the box...$3.85...

junkyardpartseeker · 09-17-2003, 11:41 PM

Everyone here on the board and on my ebay auctions know I don't use envelopes for just reason. I will ship in boxes only.

I am not holding my breath on the refund. Just a warning to others.

Tommy Davis

09-08-2003, 09:32 AM	#1
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	custom deluxe 20 suburban parts (list cheap!) rear 14 bolt $100.00 4 speed trans $100.00 with pedals bell clutch flywheel rods driveshaft cross menber $150.00 all works good. glass $5.00 each any (windsheild gone) all other is good. blue vinal 3rd row rear seat no rips or holes. $10.00 454 bb front springs 2wd $10.00 front seat tan vinal dirty but not torn up. $5.00 wiper motor $5.00 non ac heater box setup controls and all $20.00 non power steering gearbox. $10.00 side pipe exhaust ( sounds very cool) $25.00 both sides !!!! complete -engine lots of goos stuff make an offer come take it off !! come pick up the parts !! 17329 zip e-me at gn4u2c@hotmail.com for directions

09-08-2003, 12:51 PM	#2
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	does that sm465 have the chrome shift handle? if so would you separate it? __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

09-09-2003, 05:06 AM	#5
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Jason is that tan seat a bucket or a complete bench? DAVE Did any of you other guys catch the fact that this had NON power steering ??? in a C20 . musta had arms like hulk hogan back in his roid use days :-) __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

09-09-2003, 12:14 PM	#7
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	did you misprint the price or is that really $5 cuz I'm all over a good seat for $5 :-) , DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

09-10-2003, 02:18 PM	#9
junkyardpartseeker Registered User Join Date: Mar 2003 Location: Mabelvale, AR Posts: 695	fender emblems Can you pull the custom deluxe 20 fender emblems? I have a friend down here who is needing one with both studs intact. Tommy Davis __________________ junkyardpartseeker@sbcglobal.net

09-08-2003, 02:11 PM	#3
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	the rod is crome the ball is black

09-08-2003, 08:11 PM	#4
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	would you separate it from the tranny?

09-09-2003, 09:13 AM	#6
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	I did not want to seperate the rod ....give me a week if I don't sell the whole thing I will. bench seat . Yes !! c20 suburban with manual steering !!

09-09-2003, 02:24 PM	#8
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	not a misprint !!.. I don't need the seat ... I get satisfaction knowing people got a good deal.

09-10-2003, 08:56 PM	#10
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	yes i can send me $10.00 and a shipping address. e-me for info.

09-11-2003, 02:00 PM	#11
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	I have parts listed here dirt cheep !! I am really pissed that someone came to my house and had the nerve to steal parts out of the suburban...... I only had it advertised here ,so whoever you are just fell shame!!! nothing else you are a bad person.....and dam lucky I was not around.

09-11-2003, 02:05 PM	#12
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	How would anybody know where the parts are? Unless you told somebody the address, I'd have a hard time beliveing somebody from this board stole the parts. __________________ Scott Shelbourne

09-11-2003, 02:16 PM	#13
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	could be someone else ... It's just sitting in my driveway lots of stuff laying inside well used to be.. I kind of ruled out neighborhood people because I live in the country and they took the freggin radio speakers front seat and 2 rally wheels

09-11-2003, 02:30 PM	#14
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	I HATE thiefs!!!!!!! There's no room in this world for them. I hope you can find out who did this to you. It's not right. __________________ Scott Shelbourne

09-11-2003, 02:33 PM	#15
junkyardpartseeker Registered User Join Date: Mar 2003 Location: Mabelvale, AR Posts: 695	parts I agree with BigRed. They put out a warning last nite here on the news for everyone to start locking up ATV's, small trailers, riding and push lawnmowers. There is a rash of these missing here within the last few days. The theft rings will be popping up all over the place here now until the government does something to help the economy and stop them from taking our jobs overseas. Tommy __________________ junkyardpartseeker@sbcglobal.net



Register or Log In To remove these advertisements.

09-11-2003, 05:37 PM	#16
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Oh man my $5 seat is gone! . It sucks when that happens but I have been advertising on this forum for much longer than you and there are only about 6 people on this forum that even live close enough to 'come get it' . with the popularity of the 73-87s though as cheap daily drivers now everyone who owns a beater is trying to scrounge cheap parts . I guess it's also possible that someone saw it in their eye as destined for the scrap yard so they should help themselves. Still sucks though. I used to keep a truck or two in a very remote area of P-ville here and it was in a locked, fenced in area and still people were helping themselves,someone even took the time to unbolt a three speed to steal the shifter from it . sorry about that happening but I can nearly guarantee it was no one from here. , DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

09-11-2003, 06:40 PM	#17
kennyw N9PHW Join Date: Jan 2003 Location: PNW USA Posts: 139	Do you still have the Custom Deluxe 20 fender badges? I would be interested in them if you still have them. __________________ "I got it one piece at a time and it didn't cost me a dime..."

09-11-2003, 06:43 PM	#18
junkyardpartseeker Registered User Join Date: Mar 2003 Location: Mabelvale, AR Posts: 695	kennyw I already bought the fender badges. Tommy Davis __________________ junkyardpartseeker@sbcglobal.net

09-12-2003, 08:52 AM	#19
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	and They are boxed up and ready to ship !!

09-15-2003, 11:18 AM	#20
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,316	just a word of thanks to jason here he is a gentleman and a great guy to do business with met him sunday 9/14 and had a great time scavenging this truck for parts this is one of the good guys on the board! __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

09-17-2003, 12:42 PM	#21
junkyardpartseeker Registered User Join Date: Mar 2003 Location: Mabelvale, AR Posts: 695	custom deluxe 20 fender emblems The emblems arrived today. Shipped in a envelope??? Both arrived broke, and the mounting studs were even broke off when taking them off. You emailed me that nothing was broke on them and that is why I bought them. At least I have a good reputation of properly packaging my items, and insuring that they aren't broke when I pull them off vehicles. Tommy Davis __________________ junkyardpartseeker@sbcglobal.net

09-17-2003, 04:09 PM	#23
junkyardpartseeker Registered User Join Date: Mar 2003 Location: Mabelvale, AR Posts: 695	78SilveradoSWB It was in one of those USPS priority envelopes that you would mail letters to that are paper size. That was rediculious. I emailed him and told him I need the studs not broke, and I have it stating "they are NOT broken". I ship everything in boxes, no matter what it is. Tommy __________________ junkyardpartseeker@sbcglobal.net

09-17-2003, 05:43 PM	#24
78SilveradoSWB Senior Member Join Date: Apr 2002 Location: Beaverton, OR Posts: 1,615	Gee, I hope he refunds all your money. He should have used one of those small priority mail cardboard boxes, the size of a VHS cassette instead of the envelope. Both are free of charge at the post office stored right next to each other, and the postage is the same whether you use the envelope or the box...$3.85... __________________ Mitch 1978 Chevrolet Silverado C 10 454 BB, TH400

09-17-2003, 11:41 PM	#25
junkyardpartseeker Registered User Join Date: Mar 2003 Location: Mabelvale, AR Posts: 695	emblems Everyone here on the board and on my ebay auctions know I don't use envelopes for just reason. I will ship in boxes only. I am not holding my breath on the refund. Just a warning to others. Tommy Davis __________________ junkyardpartseeker@sbcglobal.net

Register or Log In To remove these advertisements.