GMPP LS3 Engine controller kit

[Blazerowner]

I have decided to go a different route with my project so I am selling a gm performance ls3 stand alone engine control kit. Comes with everything needed to put an ls3 in. It is 100% brand new, never used and complete. I paid 1200 for everything. I would like $1,050 shipped in the 48.

Comes with ls3 engine harness, denso o2 sensors, gas pedal, ecm and more. Kit is very nice and oem quality so you know it will work great

My loss your gain. Any questions feel free to ask. Will add pictures shortly but I have to open the boxes.

[Blazerowner]

Here's some pictures.

[solidaxel]

Very interested
What else do I need for a 4L60E to complete the install LS3?

[Blazerowner]

As far as controlling the transmission I know you can purchase a stand alone controller. I was going with a manual so I didn't look into the setup for an auto. Of course the ECM is programmable through a reputable shop so anything is possible. I personally have read good things about the stand alone controls being that you can program shift points on the fly.

[solidaxel]

Which one do you like?
I am trying to put some numbers together for the drive train on a new chassis & drive train
I have the chassis and LS3

[Blazerowner]

I know TCi makes this:

http://www.tciauto.com/tc/ez-tcutm-t...l85e-to-09html

Its pretty nice and will control just about any automatic. GMPP also makes one but I don't know much about it. The TCI has a lot of options including paddle shifters which is pretty cool.

[Advanced Design]

Solidaxel, at the bottom of this page are three transmission controllers from Chevrolet Performance parts. http://www.jegs.com/webapp/wcs/store...erm=Controller

One looks to be a stand alone and two are for use in conjunction with the Performance Parts engine controller system.

[dwcsr]

That's the kit we used to setup a 5.3 in an AD. The trans control is made by PCS, The TCM 2000 (Used by GM) works on a 4L60E, Its tunable with a laptop so you can add the gears and tire size to make the speedo work out correctly if its electronic. I did have trouble with the GM version of the software not working in win7 but got the PCS version and it was fine.

[Blazerowner]

There's this as well.

http://m.summitracing.com/parts/msd-2760

[solidaxel]

I wonder what GM has over MSD for another $500

[Blazerowner]

Not sure on that but sometimes OEM is more expensive than aftermarket. Similar to getting parts at the dealer. Let me know what you think. I can snap more picture if needed.

[solidaxel]

Originally Posted by Blazerowner

Not sure on that but sometimes OEM is more expensive than aftermarket. Similar to getting parts at the dealer. Let me know what you think. I can snap more picture if needed.

Is there a harness and a fuse box in the kit?

[Blazerowner]

Yes, everything you need. Harness is all done for stand alone operation by gmpp.

[Blazerowner]

Harness pic 1

[Blazerowner]

Harness pic 2

[Blazerowner]

Harness pic 3. Everything is labeled for easy installation.

[solidaxel]

How does the cruise control work with this harness?
Is there a location for the throttle position to tie to the 4L60E, and the VSS with this harness

[Blazerowner]

I've only seen this option below but I've heard there are others. The wiring for cruise control is seperate from the harness.

http://www.dakotadigital.com/index.c...od/prd1004.htm

[Blazerowner]

Anyone?

[solidaxel]

Which MAF does this kit require?

[Blazerowner]

It comes with the kit.

[Blazerowner]

It's been a little over two weeks. I'm thinking of eBay but would rather a member get it. I'll let it ride a few more days.

[solidaxel]

Kirk,
I am still adding up of the items I need for the Engine # 19301326, also the front drive and a steering column and radiator, clutch flywheel, and the wire kit you have........... or use the LM7 and the
4L60E I own!

[Blazerowner]

Let me know I just bought some other parts and need this gone to recoup the cost.

[Blazerowner]

Price dropped to $950 shipped. I won't take less, this is brand new and you won't find it cheaper.