Wheel Backspacing Help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Wvgearhead · 08-28-2015, 11:23 PM

I am looking at wheels for my 53 and would like some backspacing recommendations. TCI Mustang II front end and Ford exploder 8.8 in the back, air all the way around. I am thinking about 20x8 Mob Steel wheels. Anyone running this same rearend and TCI frontend give advice on wheels?
Thanks,

Wvgearhead · 09-03-2015, 03:12 PM

Help!
Please!

**oldman3** · 09-03-2015, 06:14 PM

Quote:

Originally Posted by Wvgearhead

Help!
Please!

I think the reason for no response is not enough info. The MII front end can be anywhere from 56" to 58" wide, which would make a difference in backspace. Don't know the width of the exploder axle. Would need mounting surface to mounting surface distance. Bed on AD pickup is 50" wide, if not tubbing the bed this will leave you with less overall length to work with. Give us some more info, maybe someone will chime in. Good luck...Jim

BIGglaSS · 09-04-2015, 07:54 PM

You are going to have to do some measuring. Maybe this calculator will help:
http://tri-5.chevyrides.com/rear_tire.php

Measure the width between the fenders. Explorer 8.8 rear is 59.5" wide. Play with the backspace and tire size until you find what fits.

74project · 09-04-2015, 09:03 PM

I am 20x8 4t.5 back space..

74project · 09-04-2015, 09:05 PM

I also know Blake from stoners speed shop uses ford rear and mustang with 4.5.

Wvgearhead · 09-04-2015, 09:19 PM

I will do a little measuring as soon as I can get back over to the garage. The front is what I am most worried about. I have seen some guys on here in past running tci mustang II with air. Hoping one of those guy may chime in. Not sure how tight 20x8s would be under the front. 74 are running that in front also?. I appreciate your help guys.

74project · 09-04-2015, 09:26 PM

Yea mine is a tci rolling chassis on air..

74project · 09-04-2015, 09:52 PM

Should have the front on next week and I can let u know on the front..

74project · 09-04-2015, 09:55 PM

Dome shape center and they are not heavy...an ls will have no problem with em..I'm powdercoating them the original green color.

74project · 09-04-2015, 09:57 PM

Shipping one wheel says 45 lbs. So 42 to 44 lbs each wheel?

Wvgearhead · 09-04-2015, 10:02 PM

I will probably go with good ol black with either spider caps or baby moons. Truck will be burnt orange. I wish mine had decent patina, it would have been cleared. I looked at your build page, your patina looks great. Is it staying? Or getting painted?

08-28-2015, 11:23 PM	#1
Wvgearhead Registered User Join Date: Jun 2010 Location: Charleston Wv Posts: 159	Wheel Backspacing Help I am looking at wheels for my 53 and would like some backspacing recommendations. TCI Mustang II front end and Ford exploder 8.8 in the back, air all the way around. I am thinking about 20x8 Mob Steel wheels. Anyone running this same rearend and TCI frontend give advice on wheels? Thanks,

09-03-2015, 03:12 PM	#2
Wvgearhead Registered User Join Date: Jun 2010 Location: Charleston Wv Posts: 159	Re: Wheel Backspacing Help Help! Please!

09-04-2015, 07:54 PM	#4
BIGglaSS Registered User Join Date: May 2014 Location: ID Posts: 663	Re: Wheel Backspacing Help You are going to have to do some measuring. Maybe this calculator will help: http://tri-5.chevyrides.com/rear_tire.php Measure the width between the fenders. Explorer 8.8 rear is 59.5" wide. Play with the backspace and tire size until you find what fits.

09-04-2015, 09:03 PM	#5
74project Registered User Join Date: May 2009 Location: Las Vegas Posts: 216	Re: Wheel Backspacing Help I am 20x8 4t.5 back space.. Attached Images

09-04-2015, 09:05 PM	#6
74project Registered User Join Date: May 2009 Location: Las Vegas Posts: 216	Re: Wheel Backspacing Help I also know Blake from stoners speed shop uses ford rear and mustang with 4.5.

09-04-2015, 09:19 PM	#7
Wvgearhead Registered User Join Date: Jun 2010 Location: Charleston Wv Posts: 159	Re: Wheel Backspacing Help I will do a little measuring as soon as I can get back over to the garage. The front is what I am most worried about. I have seen some guys on here in past running tci mustang II with air. Hoping one of those guy may chime in. Not sure how tight 20x8s would be under the front. 74 are running that in front also?. I appreciate your help guys.

09-04-2015, 09:26 PM	#8
74project Registered User Join Date: May 2009 Location: Las Vegas Posts: 216	Re: Wheel Backspacing Help Yea mine is a tci rolling chassis on air..

09-04-2015, 09:52 PM	#9
74project Registered User Join Date: May 2009 Location: Las Vegas Posts: 216	Re: Wheel Backspacing Help Should have the front on next week and I can let u know on the front.. Attached Images

09-04-2015, 09:55 PM	#10
74project Registered User Join Date: May 2009 Location: Las Vegas Posts: 216	Re: Wheel Backspacing Help Dome shape center and they are not heavy...an ls will have no problem with em..I'm powdercoating them the original green color.

09-04-2015, 09:57 PM	#11
74project Registered User Join Date: May 2009 Location: Las Vegas Posts: 216	Re: Wheel Backspacing Help Shipping one wheel says 45 lbs. So 42 to 44 lbs each wheel?

09-04-2015, 10:02 PM	#12
Wvgearhead Registered User Join Date: Jun 2010 Location: Charleston Wv Posts: 159	Re: Wheel Backspacing Help I will probably go with good ol black with either spider caps or baby moons. Truck will be burnt orange. I wish mine had decent patina, it would have been cleared. I looked at your build page, your patina looks great. Is it staying? Or getting painted?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.