09-15-2015, 10:35 PM | #1 |
Registered User
Join Date: Sep 2015
Location: Martin, TN
Posts: 64
|
Lowering kit question
Going to order 4/6 drop from belltech for my 86 square. The options are for 1" rotor and 1 1/4 rotor. When I measured my rotor, it measured 1 1/8. Is this probably a 1 1/4 rotor that is worn down? Thanks
|
09-16-2015, 06:24 AM | #2 |
Senior Member
Join Date: Jan 2011
Location: Hayes Va
Posts: 4,569
|
Re: Lowering kit question
Sounds like it has been turned more than they should have. I'll bet they were 1 1/4 at one time.
Jimmy
__________________
60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic |
09-16-2015, 07:42 AM | #3 |
Registered User
Join Date: May 2009
Location: Motor City
Posts: 9,226
|
Re: Lowering kit question
What brake system is shown on your SPID label in the glovebox? What GVW rating?
The 1" rotor was used on the manual brake system and the lightest duty power system (JB3). As a result it's pretty rare, so knowing nothing else I would guess you have the 1&1/4" rotor. Brake system chart (for an '87, '86 would be the same) is attached. K
__________________
Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ |
09-16-2015, 08:02 AM | #4 |
Registered User
Join Date: Sep 2015
Location: Martin, TN
Posts: 64
|
Re: Lowering kit question
Man I learn something new every time I ask a question. Thanks for the help guys!
|
Bookmarks |
|
|