The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-22-2015, 06:53 AM   #1
dragon65
Registered User
 
Join Date: Sep 2015
Location: east norriton Pa
Posts: 128
steering box-rag joint cofirmation

So I have read all the steering info on here over and over again.
Please confirm my thoughts before I slap down another $50 on a rag joint.
I have just purchased a Cardone 27-7501 steering box- its a saginaw 7802644. I need to confirm the rag joint should be a Dorman-31015....which is 13/16 and the splines are 36 even though there is the flat spot on the input shaft. From my education here if the flat spot was not there there would be 36.....in my case the flat spot is there and I count 31.....hence I need to order the Dorman 31015 rag joint and then a rag joint coupler to mate to the steering shaft.
Please can someone confirm my info.......If there is a comparable rag joint to the Dorman I am not opposed to a recommendation as long as I have the part number and the cost is lower

I am converting manual on a 65 gmc 6cyl.....swb to power.

Thank you soooo much for any input
dragon65 is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:22 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com