Lifted Blazers

[dubie]

Hey Guys
I just picked up this cool 80 K5 Blazer that we're looking to use as a daily driver but also take in the mud and trail ride with it. I was thinking a 4" lift with 33's would be what we're looking for but maybe a 6" lift with 35's would better.
I'm looking for pics and feed back on what works best for everyday driving

[Mil-Spec]

4 inch lift and 36s.

[68Timber]

2.5" to 3" lift over 33's or 4" lift over 35's, either have been done many times over and will work fine for DD. Mine is 2.5" over 33's and I ran this same combo on a previous K5 I owned.

[bmchevy1979]

I drive my 74 daily it's a modified 2.5" on 33s
I could live with a 4" and 35s but I didn't like the 6" I had in it for daily driving it wasn't responsive if someone cut you of in traffic just too top heavy for its own good with the 2.5" I can whip steering wheel and be in the next lane under full control without even thinking about slowing down

[lane224]

1st pick 3" lift on 36s
2nd pick 3" lift on 35s
3-4 picks New 4" lift 35s. Truck drives and responds as good as any stock truck I have owned. Only problem I had was a slight vibration in 2nd gear. Dropped T-case 1/2 inch and that cured problem.

[68Timber]

Originally Posted by lane224

1st pick 3" lift on 36s
2nd pick 3" lift on 35s
3-4 picks New 4" lift 35s. Truck drives and responds as good as any stock truck I have owned. Only problem I had was a slight vibration in 2nd gear. Dropped T-case 1/2 inch and that cured problem.

Picks 1 and 2 require some cutting on the fenders and inner fenders though

[special-K]

Originally Posted by lane224

1st pick 3" lift on 36s
2nd pick 3" lift on 35s
3-4 picks New 4" lift 35s. Truck drives and responds as good as any stock truck I have owned. Only problem I had was a slight vibration in 2nd gear. Dropped T-case 1/2 inch and that cured problem.

Those appear to be Armstrong Tru Grip RVs which were 37/14.50. I ran those on a few different body styles with 4" lift...and cut fenders on every one. I don't know when that picture was taken, but those tires must be ancient.

I never had vibration issues with 4" lift on a K/5. You may have some other issue that the angle helped show you

4" lift, 315/75-16s, and 10" wheels:

[Ski-me]

2.5" with 33's

[Ski-me]

2.5" lift with 37's

[Ski-me]

2.5" with 35's

[Jonboy]

Are you guys running the 33/12.50 or 35/12.50's on an 8 or 10" wheel? I am still undecided on lift and tire size too. Leaning towards 4" with 35's on my '74 Jimmy. It will probably never see off road, though.

[68Timber]

Mine are on 10's. I've put Baja Claws on the truck since then, I need to get a new pic.

[Ski-me]

Originally Posted by Jonboy

Are you guys running the 33/12.50 or 35/12.50's on an 8 or 10" wheel? I am still undecided on lift and tire size too. Leaning towards 4" with 35's on my '74 Jimmy. It will probably never see off road, though.

In my photos above, all are 12.5 wide (not positive on the 37's though).

Any chome type wheel was a Mickey Thompson 15 x 10.

The 33's are on factory 15 x 8's.

I prefer the 8" wide ones because the 10" rims seem to be close to the total tire width. It's really a personal preference than anything.

I saw a lot of 15 x 10 out there.

[lane224]

15x10 rims

[lowrodderchev]

4 inch lift on 35's congrads on the truck bro

[dubie]

Originally Posted by lowrodderchev

4 inch lift on 35's congrads on the truck bro

Attachment 1464243

Thanks man. I scored this running driving truck that all it needed to pass inspection was a rear brake line, for $1250!!! It's a father son build so my 17 year old can own the trails and mud over his buddies and their newer 4x4's

[Hoods69BadBowTie]

I have had a few k5 Blazers with 6" lifts and 35"s they were a lot of fun and did great off road. They didn't do bad as a daily driver but were not the most easy to navigate traffic and cruising around town in. If you do a lot of in town driving I would recommend going with a 4" lift and 33"s or 35"s at most. Kinda depends on how much flex you want out of your rig. Nice score though looks like it's going to be a fun project

[lowrodderchev]

Wait a minute he wants the blazer over the 56? I love my blazer but not sure id take her over the 57 lol

[dubie]

oh no, he's not even allowed to sit in the drivers seat of the 56. That's far to much power for a new driver. Plus, he's 6'- 8" tall and 300 lbs, he doesn't quite fit the 56 with the stock steering shaft

[68Timber]

That's cool. My 15 yr old has claimed my 85 for his first truck. 6" lift might be a bit much for a young driver. Not saying he couldn't handle it, just "dad thoughts".

[Zoomad75]

4" lift springs up front with a shackle flip out back seems to be the sweet spot for a K5. Or at least it has been for me. My 75 wheeled great with that combination. Highway road manners didn't really differ from stock. You don't have to get a 6" lift to run 35's. At most if you get a flexy set of front springs you might have to clearance the front corners of the fenders for clearance for turning under full stuff.

Personally, I prefer running the larger tire like a 35" with the 4" lift over a 6" lift to keep the center of gravity lower.

[h2omelon]

6" lift on 35x12.50x15s