The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-06-2015, 12:05 AM   #1
aod92
Registered User
 
aod92's Avatar
 
Join Date: Dec 2014
Location: Plainfield il.
Posts: 643
Pcm location?

Looking for some ideas on where to mount my pcm. I have about 3ft of reach from the back of my heads. I definitely want it mounted inside the cab. I know it's a matter of preference but wondering where some of you guys mounted yours. Thanks.
aod92 is offline   Reply With Quote
Old 11-06-2015, 01:10 PM   #2
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
Re: Pcm location?

I put mine in the glove box.
I cut the glove box so the 2 ECU connectors would just slip inside and hook up.



__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 11-06-2015, 02:17 PM   #3
aod92
Registered User
 
aod92's Avatar
 
Join Date: Dec 2014
Location: Plainfield il.
Posts: 643
Re: Pcm location?

Quote:
Originally Posted by Andy4639 View Post
I put mine in the glove box.
I cut the glove box so the 2 ECU connectors would just slip inside and hook up.



Not a bad idea
aod92 is offline   Reply With Quote
Old 11-07-2015, 02:15 AM   #4
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Pcm location?

I started with mine on the DS inner fender. It was easy access, 5 second quick release, and used the cooling louvres in the core support to help with heat.


Then I pulled my inner fenders, and relocated the ECM and TAC up onto the firewall on the inside of the cab. I build a knee-pad panel that mounts under the dash and creates a more sectioned off area under the dash and behind my shifter base. The ECM sits below the glovebox and above the passenger footwell. The TAC mounts right ahead of my shifter console. You can just see the TAC in the upper right of the picture, and with the panels in place and carpet up, you can't see any of the wiring or it.

__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 11-07-2015, 02:52 AM   #5
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,670
Re: Pcm location?

Mines behind the glove box..I know you only have 3ft to play with but I wish many times over I had my harness made long enough to mount it under or behind the seat...that's how I will do my next one.
mongocanfly is offline   Reply With Quote
Old 11-07-2015, 09:33 AM   #6
homemade87
Registered User
 
Join Date: Apr 2010
Location: Guntersville Alabama
Posts: 1,073
Re: Pcm location?

I put mine behind the glove box also on my 82 . Worked out good for me . Just had the modify the harness length . Heres a picture where I went thru the fire wall . Its the big bulk just behind the red trans stick . I used the factory hole . Sure did clean up the engine bay .
Attached Images
 
homemade87 is offline   Reply With Quote
Old 11-11-2015, 02:52 AM   #7
Vandals909
Registered User
 
Join Date: Sep 2005
Location: So. Cal
Posts: 321
Re: Pcm location?

Here are some more idea's.

http://67-72chevytrucks.com/vboard/s...d.php?t=401254
Vandals909 is offline   Reply With Quote
Old 11-11-2015, 11:41 PM   #8
uxdesigner
Registered User
 
Join Date: Nov 2013
Location: Rocklin, CA
Posts: 204
Re: Pcm location?

Man that is a great idea! Thanks for the picture, truck looks clean!
uxdesigner is offline   Reply With Quote
Old 11-23-2015, 09:49 PM   #9
aod92
Registered User
 
aod92's Avatar
 
Join Date: Dec 2014
Location: Plainfield il.
Posts: 643
Re: Pcm location?

I ended up putting it in the glove box. Figured it was easily accessible and out of the way at the same time. I also put the obd 2 port in there too.
Attached Images
 
aod92 is offline   Reply With Quote
Old 11-24-2015, 02:16 AM   #10
Chris Coufal
Registered User
 
Join Date: Aug 2014
Location: Austin, TX.
Posts: 138
Re: Pcm location?

Mine is behind the dash. I wanted the glovebox space for an AC kit later down the road.

Chris Coufal is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:09 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com