The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-29-2015, 12:20 PM   #1
Reno
Registered User
 
Reno's Avatar
 
Join Date: Jan 2014
Location: Fort Collins CO
Posts: 124
1970 2WD Project

OK so I am gathering parts for my 1970 2WD restoration. It will be a full body off media blasted process….

My plans are to build with minor modifications, nothing that can't be reversed.

First off I need doors, mine are pretty rough - I have located a set of really clean 72 pickup / suburban doors that I was going to cut down. My question is it really a big deal that they will be 72 doors with the added screw below the wing window for support from GM or should I look for the correct style.

Looking for a 1972 single wall top as it has no top - again preference.

It has a 67 front clip on it now and I will be using this as I prefer the look...

I will be also adding disc brakes on all 4 wheels with 5 bolt lug pattern. Drop spindles on front and lowered in the rear….

I wouldn't think that any future Buyer would walk away due to these mods?

And finally it will be a LSx conversion - too much benefit not to go this route and again if someone had to they could reverse it to conventional V8

Thoughts?

Suggestions?
Reno is offline   Reply With Quote
Old 11-29-2015, 02:30 PM   #2
notsolo
Registered User
 
notsolo's Avatar
 
Join Date: Apr 2008
Location: Md
Posts: 2,482
Re: 1970 2WD Project

Sounds like a solid plan, more power with better brakes, if you build it right then you will enjoy driving it! then forget ever selling it in the future. Build what you want, I regret not going with a modern drive train. Only suggestion don't leave the seats till last and get 3 pt seat belts.....Is this an original 2wd, where were the shocks mounted in the rear? and Take plenty of photo's.
notsolo is offline   Reply With Quote
Old 11-29-2015, 05:08 PM   #3
hemi43
Registered User
 
hemi43's Avatar
 
Join Date: Mar 2015
Location: Ontario Canada
Posts: 1,526
Re: 1970 2WD Project

Quote:
Originally Posted by Reno View Post
First off I need doors, mine are pretty rough - I have located a set of really clean 72 pickup / suburban doors that I was going to cut down. My question is it really a big deal that they will be 72 doors with the added screw below the wing window for support from GM or should I look for the correct style.
My truck is a 70 also, and has it's original doors. I have that added screw below the wing window.
hemi43 is offline   Reply With Quote
Old 11-29-2015, 08:03 PM   #4
Reno
Registered User
 
Reno's Avatar
 
Join Date: Jan 2014
Location: Fort Collins CO
Posts: 124
Re: 1970 2WD Project

Yes its an original 2WD Blazer with CE vin matching numbers on frame rail. Not sure on other components being original, engine, trans, etc
Reno is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:11 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com