TX Big Truck Wheels Accuride 28160 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JPBrecheisen** · 01-29-2016, 06:23 PM

Set of two hard to find non-split rim wheels for big trucks C50-C60 etc.

My truck is a 1960 C60, but I think these fit years beyond 60-66. If you're looking for these wheels by part number, I'm sure you'll know if they fit or not.

Accuride obsolete part number 28160. These are stamped Firestone but are exactly like the accuride wheel.

SOLD for the pair plus shipping.

I'd rather not split up the pair, but I'll consider it if you only need one.

Thanks

**62cdan** · 03-13-2016, 10:14 PM

Are these still available?
-Mike
(618) 960-9135

**JPBrecheisen** · 03-13-2016, 11:15 PM

Quote:

Originally Posted by 62cdan

Are these still available?
-Mike
(618) 960-9135

Yep

**62cdan** · 03-13-2016, 11:17 PM

I'll take them.

Just let me know how you want to be paid. thanks!
-Mike

**62cdan** · 03-13-2016, 11:18 PM

Your not, by chance, going to Pate Swap meet next month, are you?

**JPBrecheisen** · 03-13-2016, 11:26 PM

I wasn't planning on it. Work schedule disallows.

I will shoot you pay pal info in a PM. A few guys had PM'd me about these, but I think the shipping costs were going to disinterest them on the deal.

I figured it would have to be someone withing driving distance.

**JPBrecheisen** · 03-13-2016, 11:28 PM

Also, there is no rubber on these wheels anymore. The tires were shot and I had them scrapped.

**62cdan** · 03-13-2016, 11:29 PM

That's fine.

**62cdan** · 03-13-2016, 11:34 PM

I've been looking for these, and I having a really hard time. I need six, but this will be a good start. I have a 1970 GMC C5500 that is a great truck, but , I just can't justify buying six new wheels and tires for it. But I have to do something, because no one in my area will even touch the wheels on it.

**JPBrecheisen** · 03-14-2016, 12:26 AM

I had the same problem. Looked and looked and only found these two. I ended up going with the aftermarket style from wheels now Inc.

Here is a picture with them and 10R rubber.

Truck originally had the 20" RH5°

Jonathon

**62cdan** · 03-14-2016, 05:41 AM

Nice looking truck.....

Do you remember what they charged per wheel?

**JPBrecheisen** · 03-14-2016, 07:45 AM

I think it was in the realm of $225 ea.

They still have a few of the original looking centers so they can make original looking ones also. Those however can only be made in the 7.5" width and cost a good deal more. They were a little over $300 something per wheel.

They could have made the 6.75" width, but the disk and wheel didn't have the proper fit and they would have had to fill the gap between the two with the weld vs. The two pieces fitting snuggly so there is proper weight distribution.

I don't care much for the look of the reproduction wheel, but I ran out of time and I think they look good enough after painting. They are a tad thicker so you have to watch the wheels stud length on the rears. They weigh a tad more also. I think around 90 lbs vs the original at about 75 lbs.

I will try to find my old invoice for the exact cost but i am.pretty sure it was about $225 ea.

**JPBrecheisen** · 03-14-2016, 02:38 PM

Quote:

Originally Posted by 62cdan

I'll take them.

Just let me know how you want to be paid. thanks!
-Mike

Sale pending to 62cdan

Sent you a PM

**62cdan** · 03-18-2016, 12:12 PM

Looking for more, in case anybody has some.
Thanks!
-Mike

**JPBrecheisen** · 04-09-2016, 11:01 AM

Quote:

Originally Posted by 62cdan

Looking for more, in case anybody has some.
Thanks!
-Mike

Mike,

Wheels shipped. Tracking info is in your PMs.

Jonathon

LT1 Burb · 04-09-2016, 11:12 AM

Wow, nice truck, if you don't mind I am going to steal the pic for my 60-66 OEM facebook page.

**JPBrecheisen** · 04-09-2016, 05:54 PM

Quote:

Originally Posted by LT1 Burb

Wow, nice truck, if you don't mind I am going to steal the pic for my 60-66 OEM facebook page.

Go for it.

Jonathon

01-29-2016, 06:23 PM	#1
JPBrecheisen Senior Member Join Date: Jul 2012 Location: Harrisville, New York Posts: 459	Big Truck Wheels Accuride 28160 Set of two hard to find non-split rim wheels for big trucks C50-C60 etc. My truck is a 1960 C60, but I think these fit years beyond 60-66. If you're looking for these wheels by part number, I'm sure you'll know if they fit or not. Accuride obsolete part number 28160. These are stamped Firestone but are exactly like the accuride wheel. SOLD for the pair plus shipping. I'd rather not split up the pair, but I'll consider it if you only need one. Thanks Attached Images __________________ 1960 GMC K1500 LB Fleet Side 1962 GMC K1000 LB Step Side 1988 Chevrolet C2500 Last edited by JPBrecheisen; 03-14-2016 at 10:22 PM.

03-13-2016, 10:14 PM	#2
62cdan Senior Member Join Date: Mar 2016 Location: Belleville, IL Posts: 241	Re: Big Truck Wheels Accuride 28160 Are these still available? -Mike (618) 960-9135

03-13-2016, 11:17 PM	#4
62cdan Senior Member Join Date: Mar 2016 Location: Belleville, IL Posts: 241	Re: Big Truck Wheels Accuride 28160 I'll take them. Just let me know how you want to be paid. thanks! -Mike

03-13-2016, 11:18 PM	#5
62cdan Senior Member Join Date: Mar 2016 Location: Belleville, IL Posts: 241	Re: Big Truck Wheels Accuride 28160 Your not, by chance, going to Pate Swap meet next month, are you?

03-13-2016, 11:26 PM	#6
JPBrecheisen Senior Member Join Date: Jul 2012 Location: Harrisville, New York Posts: 459	Re: Big Truck Wheels Accuride 28160 I wasn't planning on it. Work schedule disallows. I will shoot you pay pal info in a PM. A few guys had PM'd me about these, but I think the shipping costs were going to disinterest them on the deal. I figured it would have to be someone withing driving distance. __________________ 1960 GMC K1500 LB Fleet Side 1962 GMC K1000 LB Step Side 1988 Chevrolet C2500

03-13-2016, 11:28 PM	#7
JPBrecheisen Senior Member Join Date: Jul 2012 Location: Harrisville, New York Posts: 459	Re: Big Truck Wheels Accuride 28160 Also, there is no rubber on these wheels anymore. The tires were shot and I had them scrapped. __________________ 1960 GMC K1500 LB Fleet Side 1962 GMC K1000 LB Step Side 1988 Chevrolet C2500

03-13-2016, 11:29 PM	#8
62cdan Senior Member Join Date: Mar 2016 Location: Belleville, IL Posts: 241	Re: Big Truck Wheels Accuride 28160 That's fine.

03-13-2016, 11:34 PM	#9
62cdan Senior Member Join Date: Mar 2016 Location: Belleville, IL Posts: 241	Re: Big Truck Wheels Accuride 28160 I've been looking for these, and I having a really hard time. I need six, but this will be a good start. I have a 1970 GMC C5500 that is a great truck, but , I just can't justify buying six new wheels and tires for it. But I have to do something, because no one in my area will even touch the wheels on it.

03-14-2016, 12:26 AM	#10
JPBrecheisen Senior Member Join Date: Jul 2012 Location: Harrisville, New York Posts: 459	Re: Big Truck Wheels Accuride 28160 I had the same problem. Looked and looked and only found these two. I ended up going with the aftermarket style from wheels now Inc. Here is a picture with them and 10R rubber. Truck originally had the 20" RH5° Jonathon Attached Images __________________ 1960 GMC K1500 LB Fleet Side 1962 GMC K1000 LB Step Side 1988 Chevrolet C2500

03-14-2016, 05:41 AM	#11
62cdan Senior Member Join Date: Mar 2016 Location: Belleville, IL Posts: 241	Re: Big Truck Wheels Accuride 28160 Nice looking truck..... Do you remember what they charged per wheel?

03-14-2016, 07:45 AM	#12
JPBrecheisen Senior Member Join Date: Jul 2012 Location: Harrisville, New York Posts: 459	Re: Big Truck Wheels Accuride 28160 I think it was in the realm of $225 ea. They still have a few of the original looking centers so they can make original looking ones also. Those however can only be made in the 7.5" width and cost a good deal more. They were a little over $300 something per wheel. They could have made the 6.75" width, but the disk and wheel didn't have the proper fit and they would have had to fill the gap between the two with the weld vs. The two pieces fitting snuggly so there is proper weight distribution. I don't care much for the look of the reproduction wheel, but I ran out of time and I think they look good enough after painting. They are a tad thicker so you have to watch the wheels stud length on the rears. They weigh a tad more also. I think around 90 lbs vs the original at about 75 lbs. I will try to find my old invoice for the exact cost but i am.pretty sure it was about $225 ea. __________________ 1960 GMC K1500 LB Fleet Side 1962 GMC K1000 LB Step Side 1988 Chevrolet C2500

03-18-2016, 12:12 PM	#14
62cdan Senior Member Join Date: Mar 2016 Location: Belleville, IL Posts: 241	Re: Big Truck Wheels Accuride 28160 Looking for more, in case anybody has some. Thanks! -Mike __________________ 1964 C-10 SWB Fleetside 6cyl/ Stick 1968 C-10 SWB Fleetside 355/Turbo 400 1970 GMC 5500 Dump Truck 401 V6 1971 K5 Blazer CST 4WD 350/ 350 1971 C-30 Longhorn 350 / 4 Speed 1972 K-10 SWB Fleetside 350/ 4 Speed 1972 GMC SWB Fleetside 6cyl/ Stick 1979 K/10 SWB Fleetside 350/350

04-09-2016, 11:12 AM	#16
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: Big Truck Wheels Accuride 28160 Wow, nice truck, if you don't mind I am going to steal the pic for my 60-66 OEM facebook page.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.