1966 c10 looking for LS harness routing ideas for a clean look - The 1947 - Present Chevrolet & GMC Truck Message Board Network

russellrox · 02-21-2016, 06:13 PM

I smoothed out my firewall and wanting my wiring harness to be as subtle as possible. I plan on mounting the ecm in the cab behind the glove box, was thinking of doing a DT style bulkhead connector so my body harness and powertrain harness connect and route in one spot out of sight. Anyone have any ideas or pics would be great of their setup.

Mikeextrafast · 02-21-2016, 08:36 PM

I haven't done a LS swap in a c10 yet but I did do one in my 69 Camaro and I wanted the harness hid as well, I drilled the hole behind the passenger head, it may depend on the harness you have as well

BR3W CITY · 02-21-2016, 08:53 PM

bulkheads look really cool, you just need to be a bit careful with its # of connections and wire size specifics.

Mikeextrafast · 02-21-2016, 08:56 PM

Who's harness are you running?

**mongocanfly** · 02-21-2016, 10:02 PM

I'm not sure about the room behind the glovebox on a 66 but on my 81 it was a nightmare trying to stuff everything behind the glovebox..if I had a do-over I would have run the harness down the back of the engine on top of the tranny and done all my ecm and fuse block work either under or behind the seat..

russellrox · 02-21-2016, 10:44 PM

That's prob a better location for the harness under or behind the seat, anyone have any pics.

02-21-2016, 06:13 PM	#1
russellrox Registered User Join Date: Jul 2014 Location: saskatchewan Posts: 172	1966 c10 looking for LS harness routing ideas for a clean look I smoothed out my firewall and wanting my wiring harness to be as subtle as possible. I plan on mounting the ecm in the cab behind the glove box, was thinking of doing a DT style bulkhead connector so my body harness and powertrain harness connect and route in one spot out of sight. Anyone have any ideas or pics would be great of their setup.

02-21-2016, 08:36 PM	#2
Mikeextrafast Registered User Join Date: Dec 2015 Location: Draper NC Posts: 22	Re: 1966 c10 looking for LS harness routing ideas for a clean look I haven't done a LS swap in a c10 yet but I did do one in my 69 Camaro and I wanted the harness hid as well, I drilled the hole behind the passenger head, it may depend on the harness you have as well

02-21-2016, 08:53 PM	#3
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: 1966 c10 looking for LS harness routing ideas for a clean look bulkheads look really cool, you just need to be a bit careful with its # of connections and wire size specifics. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

02-21-2016, 08:56 PM	#4
Mikeextrafast Registered User Join Date: Dec 2015 Location: Draper NC Posts: 22	Re: 1966 c10 looking for LS harness routing ideas for a clean look Who's harness are you running?

02-21-2016, 10:02 PM	#5
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: 1966 c10 looking for LS harness routing ideas for a clean look I'm not sure about the room behind the glovebox on a 66 but on my 81 it was a nightmare trying to stuff everything behind the glovebox..if I had a do-over I would have run the harness down the back of the engine on top of the tranny and done all my ecm and fuse block work either under or behind the seat..

02-21-2016, 10:44 PM	#6
russellrox Registered User Join Date: Jul 2014 Location: saskatchewan Posts: 172	Re: 1966 c10 looking for LS harness routing ideas for a clean look That's prob a better location for the harness under or behind the seat, anyone have any pics.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.