cabs and short fleetside to go - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cheyenne10 · 09-23-2003, 11:23 AM

I need to lighten up the project list. I have a very good non-AC 1970 cab with new installed floorpans and rockers and partially smoothed firewall (plan was to add vintage air) with or without matching doors. It has original paint except for replaced sheetmetal. Floor has high hump (removeable)(was 4spd). $500. Also have 1970 complete short fleetside truck with very good bed, cab needs a little work, front fenders and hood needs replaced. Complete 250 6 cyl, PS, no PB, motor needs replaced has stock TH350 and I beleive 3.73 rear. Depending on price some replacement sheetmetal is available as well as good 6 cyl motor. UPDATED PRICE $1100 for base truck. It needs to be trailered home. Also have 2 bare v8 blocks, heads and 4sd tranny.

Also have rolling 72 cheyenne super 1/2 ton leaf spring, lwb AC, truck. No motor. Was 402 BB. All there except BB motor, brackets and PS. Bed rough, AC cab great still including factory tach dash,rebuilt seat, ralleys and AMMCO rebuilt TH400. I drove this truck before previous owner took out motor. Also a trailer job.UPDATED PRICE $1200.

Make package deal and wife would be more understanding!! Also will consider part trades for clean parts/pieces that don't take up so much room that I might be albe to use.

Cannot ship or deliver this stuff but could put someone together a nice package. Located in Eugene, Oregon. Email inquires to bob.hines@eweb.eugene.or.us

Pics available to patient inquiries.

azngosh8r · 09-23-2003, 12:02 PM

Hello-any pics of the short bed and cab? Thanks!
Cruizin the Valley AZ

ljbear · 09-23-2003, 12:25 PM

I'm interested in the 70 also. Is the bed wood or steel floor?

LJ

cheyenne10 · 09-23-2003, 12:29 PM

Maybe 69 or 70 have to check title. Bedfloor steel and has some dents and surface rust buy no cancer. Bedside are great and straight. Used to be local meter reader truck.

Here in one shot that really doesn't show well. Email me for few more and specific requests.

bob.hines@eweb.eugene.or.us

Spanky_Pete · 09-23-2003, 03:08 PM

Any pics from the inside and underneath of the cabs on that shortbox and the Cheyenne?

cheyenne10 · 09-24-2003, 12:10 AM

For those still interested and haven't received pics email me at bob.hines@eweb.eugene.or.us

Pics aren't greatest but show idea. Tough to describe over net.

cheyenne10 · 09-24-2003, 12:17 PM

I have snet info. to several inquiries. Can send domemore tonight with email requests.

**PICKMUP** · 09-24-2003, 11:00 PM

Bob,
I've got a LWB bed upper & lower wood trim, that looks like it has never had anything inside it! Metal floor... You need to put that on your Super to make a great truck! $600

cheyenne10 · 09-25-2003, 07:28 PM

Frank, I appriciate the offer but I think this project needs to be someone elses. I have a couple of trucks in line in fornt of this one and things are moving slow on them. Wife gets antsy with yard clutter!! I will remind potential buyers of this.

I actually have a good floor and left bedside I would through in on the deal.

cheyenne10 · 09-26-2003, 05:08 PM

I am working with board member with interest on 70 cab and 72 super but nothing firm yet. Trying to get some pics to one. Anyone else interested in possible trades? Many of us are short on cash and long on projects.

**PICKMUP** · 09-26-2003, 06:52 PM

Bob,
I always recommend you post any pics people want to see, rather than email. More people will see it that way, and you don't have to send them so many times...it just might peak someone else's interest, if the requestor doesn't go for it...and I am quietly watching to see what you have and what happens to it.

cheyenne10 · 09-26-2003, 07:59 PM

Frank;
thanks for advise. Lurking Eh.......!! 4 swb's and suburban for sale!!

I will try to get more posted. I'm strill practicing on that.

cheyenne10 · 09-26-2003, 08:01 PM

1 more of 72 cheyenne super BB, AC, Tach, without motor and PS.

cheyenne10 · 09-27-2003, 01:52 AM

http://64.246.42.114/vboard/showthre...threadid=70426

cheyenne10 · 09-27-2003, 02:13 AM

Come and get it $1200 including factory tach. Next I pull tach, seat, brake booster, ralleys, TH400.

cheyenne10 · 09-27-2003, 02:15 AM

very little rust in cab.

cheyenne10 · 09-27-2003, 02:18 AM

Buy whole truck and drop in motor or use to build another. I was going to use 69 short fleet posted with this 72 BB ac cab and pieces for great start on short fleet 72 cheyenne super. Just use a little imagination. Trades welcome.

My suburban needs more $$ and attention.

cheyenne10 · 09-27-2003, 11:21 AM

See new prices above, I want to sell these things what are they worth to you?

slim shaney · 09-30-2003, 10:10 PM

would you be interested in selling the swb fleet pass fender and ship it to arkansas

cheyenne10 · 09-30-2003, 11:28 PM

I'm trying to keep truck whole at the moment to sell complete. Let me check around to see if I can find a decent fender to sell seperate. Not sure cost to ship, whats your zip code and town. If I find oen I can check on Greyhound mentioned by others on the board for reasonable shipping costs.

slim shaney · 10-01-2003, 10:47 PM

my zip is 72943 magazine arkansas i also need a rear bed sill that fits between the gate and floor thanks for your help slim

**67sss** · 10-05-2003, 10:03 PM

Wanna trade? I have a 3 wheeler that wouldn't take up to much room and you could also go the DUNES and enjoy it.

cheyenne10 · 10-06-2003, 12:17 AM

No I am not really interested in 3-wheeler. My 7 yr old son wouldn't agree!! I grew up on the coast with endless dunes. Had a VW rail for a while. A decent baja or manx is on the wish list for the future to get back in the sand.

Am taking off for a few days of R/R (deer hunting trip w/ my dad). When I get back I will put more effort into selling some of this stuff off. I need the room and a little change for my other projects.

OldSkool71 · 10-06-2003, 01:34 AM

you've got a pm...

09-23-2003, 11:23 AM	#1
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	cabs and short fleetside to go I need to lighten up the project list. I have a very good non-AC 1970 cab with new installed floorpans and rockers and partially smoothed firewall (plan was to add vintage air) with or without matching doors. It has original paint except for replaced sheetmetal. Floor has high hump (removeable)(was 4spd). $500. Also have 1970 complete short fleetside truck with very good bed, cab needs a little work, front fenders and hood needs replaced. Complete 250 6 cyl, PS, no PB, motor needs replaced has stock TH350 and I beleive 3.73 rear. Depending on price some replacement sheetmetal is available as well as good 6 cyl motor. UPDATED PRICE $1100 for base truck. It needs to be trailered home. Also have 2 bare v8 blocks, heads and 4sd tranny. Also have rolling 72 cheyenne super 1/2 ton leaf spring, lwb AC, truck. No motor. Was 402 BB. All there except BB motor, brackets and PS. Bed rough, AC cab great still including factory tach dash,rebuilt seat, ralleys and AMMCO rebuilt TH400. I drove this truck before previous owner took out motor. Also a trailer job.UPDATED PRICE $1200. Make package deal and wife would be more understanding!! Also will consider part trades for clean parts/pieces that don't take up so much room that I might be albe to use. Cannot ship or deliver this stuff but could put someone together a nice package. Located in Eugene, Oregon. Email inquires to bob.hines@eweb.eugene.or.us Pics available to patient inquiries. __________________ Bob Last edited by cheyenne10; 09-27-2003 at 11:19 AM.

09-23-2003, 12:02 PM	#2
azngosh8r Registered User Join Date: Sep 2003 Location: Phoenix Posts: 308	Hello-any pics of the short bed and cab? Thanks! Cruizin the Valley AZ __________________ Russ Ellis 'Cruizin' the Valley' - Custom Classics *"The Guyz Garage"*

09-23-2003, 12:25 PM	#3
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	I'm interested in the 70 also. Is the bed wood or steel floor? LJ __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

09-23-2003, 12:29 PM	#4
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	EMAIL ME Maybe 69 or 70 have to check title. Bedfloor steel and has some dents and surface rust buy no cancer. Bedside are great and straight. Used to be local meter reader truck. Here in one shot that really doesn't show well. Email me for few more and specific requests. bob.hines@eweb.eugene.or.us Attached Images __________________ Bob Last edited by cheyenne10; 09-23-2003 at 12:35 PM.

09-24-2003, 12:10 AM	#6
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	some pics ready For those still interested and haven't received pics email me at bob.hines@eweb.eugene.or.us Pics aren't greatest but show idea. Tough to describe over net. Attached Images __________________ Bob

09-23-2003, 03:08 PM	#5
Spanky_Pete Too many trucks? Nah... Join Date: Mar 2002 Location: SW Washington State Posts: 154	Any pics from the inside and underneath of the cabs on that shortbox and the Cheyenne?

09-24-2003, 12:17 PM	#7
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	Sent info. I have snet info. to several inquiries. Can send domemore tonight with email requests. Attached Images __________________ Bob

09-24-2003, 11:00 PM	#8
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,159	Bob, I've got a LWB bed upper & lower wood trim, that looks like it has never had anything inside it! Metal floor... You need to put that on your Super to make a great truck! $600 __________________ Email: frankeham@comcast.net Phone: 360-956-7170

09-25-2003, 07:28 PM	#9
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	Frank Frank, I appriciate the offer but I think this project needs to be someone elses. I have a couple of trucks in line in fornt of this one and things are moving slow on them. Wife gets antsy with yard clutter!! I will remind potential buyers of this. I actually have a good floor and left bedside I would through in on the deal. __________________ Bob

09-26-2003, 05:08 PM	#10
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	possible interest I am working with board member with interest on 70 cab and 72 super but nothing firm yet. Trying to get some pics to one. Anyone else interested in possible trades? Many of us are short on cash and long on projects. __________________ Bob

09-26-2003, 06:52 PM	#11
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,159	Post the pics Bob, I always recommend you post any pics people want to see, rather than email. More people will see it that way, and you don't have to send them so many times...it just might peak someone else's interest, if the requestor doesn't go for it...and I am quietly watching to see what you have and what happens to it. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

09-26-2003, 07:59 PM	#12
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	good advise Frank; thanks for advise. Lurking Eh.......!! 4 swb's and suburban for sale!! I will try to get more posted. I'm strill practicing on that. Attached Images __________________ Bob

09-26-2003, 08:01 PM	#13
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	more 1 more of 72 cheyenne super BB, AC, Tach, without motor and PS. Attached Images __________________ Bob

09-27-2003, 01:52 AM	#14
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	startin new threads for each truck to avoid confusion http://64.246.42.114/vboard/showthre...threadid=70426 __________________ Bob

09-27-2003, 02:13 AM	#15
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	72 cheyenne super price reduced Come and get it $1200 including factory tach. Next I pull tach, seat, brake booster, ralleys, TH400. Attached Images __________________ Bob



Register or Log In To remove these advertisements.

09-27-2003, 02:15 AM	#16
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	another interior shot very little rust in cab. Attached Images __________________ Bob

09-27-2003, 02:18 AM	#17
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	engine compartment Buy whole truck and drop in motor or use to build another. I was going to use 69 short fleet posted with this 72 BB ac cab and pieces for great start on short fleet 72 cheyenne super. Just use a little imagination. Trades welcome. My suburban needs more $$ and attention. Attached Images __________________ Bob

09-27-2003, 11:21 AM	#18
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	UPDATED PRICES ABOVE See new prices above, I want to sell these things what are they worth to you? __________________ Bob

09-30-2003, 10:10 PM	#19
slim shaney Registered User Join Date: Aug 2003 Location: magazine arkansas Posts: 14	would you be interested in selling the swb fleet pass fender and ship it to arkansas

09-30-2003, 11:28 PM	#20
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	slim I'm trying to keep truck whole at the moment to sell complete. Let me check around to see if I can find a decent fender to sell seperate. Not sure cost to ship, whats your zip code and town. If I find oen I can check on Greyhound mentioned by others on the board for reasonable shipping costs. __________________ Bob

10-01-2003, 10:47 PM	#21
slim shaney Registered User Join Date: Aug 2003 Location: magazine arkansas Posts: 14	my zip is 72943 magazine arkansas i also need a rear bed sill that fits between the gate and floor thanks for your help slim

10-05-2003, 10:03 PM	#22
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	Wanna trade? I have a 3 wheeler that wouldn't take up to much room and you could also go the DUNES and enjoy it. Attached Images

10-06-2003, 12:17 AM	#23
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	67sss No I am not really interested in 3-wheeler. My 7 yr old son wouldn't agree!! I grew up on the coast with endless dunes. Had a VW rail for a while. A decent baja or manx is on the wish list for the future to get back in the sand. Am taking off for a few days of R/R (deer hunting trip w/ my dad). When I get back I will put more effort into selling some of this stuff off. I need the room and a little change for my other projects. __________________ Bob

10-06-2003, 01:34 AM	#24
OldSkool71 C/10 CLUB MEMBER Join Date: Jul 2003 Location: Lakewood, CA Posts: 993	you've got a pm... __________________ -Ron-

Register or Log In To remove these advertisements.