SC 1962 C10 stepside project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

62step · 02-26-2016, 02:08 PM

I'm thinking about parting out my truck. I lost interest in it and don't want to see it sit. It has new front fenders, new tail gate, new wiring harness, new weather stripping, etc. It has the 5 lug conversion done to it, chevy 350 and 700r4 trans (not even broken in yet). Has 2 hoods (chevy hood is in pretty bad shape, GMC hood is in good shape). My wife and I are having a baby and I want this gone before she's born. (July).

Frame has been sandblasted and painted, starting working on the cab (that's why it's off), only rust is passenger rocker and normal spots in floorboard.

I will get more pictures when I get home this evening. Like I said it's a nice truck, but I just don't want to put anymore time into it.

My price: take the whole truck, motor and trans, $4500 (everything truck related).

Pm me or text me. (803) 322-7617

Thanks

If this is the wrong thread, I'm sorry.

**GMCNUT** · 02-26-2016, 09:23 PM

How much for the blasted and painted frame? GMC hood price? Wondering how nice the frame turned out because the "X" frames are very hard to paint properly with a cup gun (unless when you said painted you meant rattle canned). Did you replace wheel bearings, seals, tie rod ends etc when you blasted and painted the frame?

62step · 03-28-2016, 09:16 AM

My lowered price is $3500. That takes everything. The wheel bearings were replaced about 5 years ago, I didn't blast and paint the frame the previous owner did. I was going to replace all new front end parts, but I just lost interest.

Brad54 · 03-28-2016, 10:50 AM

Price on the cab?

-Brad

62step · 03-28-2016, 11:00 AM

I really want to wait on parting it out to see if someone will take the whole thing. I don't want to see it sit and go to waste, and I don't want to put anymore money into it. Without the motor and trans, come and get everything that belongs to the truck for $2500 (new wiring harness, new front fenders, new tailgate, 2 hoods, etc.)

Thanks

roll_the_dice · 03-28-2016, 11:44 AM

I sent you a PM with questions about the entire truck...thanks!

62step · 03-28-2016, 05:17 PM

Pmed.

62step · 04-05-2016, 09:42 AM

Here is a link to the craigslist ad.

http://charlotte.craigslist.org/cto/5524230526.html

62step · 04-21-2016, 02:29 PM

Sold.

02-26-2016, 02:08 PM	#1
62step Registered User Join Date: Jan 2014 Location: Rock Hill SC Posts: 156	1962 C10 stepside project I'm thinking about parting out my truck. I lost interest in it and don't want to see it sit. It has new front fenders, new tail gate, new wiring harness, new weather stripping, etc. It has the 5 lug conversion done to it, chevy 350 and 700r4 trans (not even broken in yet). Has 2 hoods (chevy hood is in pretty bad shape, GMC hood is in good shape). My wife and I are having a baby and I want this gone before she's born. (July). Frame has been sandblasted and painted, starting working on the cab (that's why it's off), only rust is passenger rocker and normal spots in floorboard. I will get more pictures when I get home this evening. Like I said it's a nice truck, but I just don't want to put anymore time into it. My price: take the whole truck, motor and trans, $4500 (everything truck related). Pm me or text me. (803) 322-7617 Thanks If this is the wrong thread, I'm sorry. Attached Images

02-26-2016, 09:23 PM	#2
GMCNUT Senior Member Join Date: Jun 2007 Location: Arab Alabama Posts: 1,809	Re: 1962 C10 stepside project How much for the blasted and painted frame? GMC hood price? Wondering how nice the frame turned out because the "X" frames are very hard to paint properly with a cup gun (unless when you said painted you meant rattle canned). Did you replace wheel bearings, seals, tie rod ends etc when you blasted and painted the frame? __________________ My Projects and Toys - All 100% Stock 1972 CST "Highlander" Blazer - 350 auto, PS, PB, A/C, Tilt, Tach, AM/FM & Positraction 1966 Chevy SWB Fleetside BBW Custom Cab, #'s matching 327 V8 & Powerglide, factory deluxe heat, PS, PB, Tinted Glass, sway bar 1961 Chevy SWB Fleetside BBW Custom Cab #'s matching 283 V8 & Powerglide w/ uber-rare Cool-Pack A/C, factory PB, deluxe heat, Clock 1961 GMC K1000 4x4 SWB w/ BBW, Custom Cab and numbers matching 305D V6 engine & 4 spd 1960 GMC SWB Fleetside BBW Custom Cab #'s matching 305A V6 & Hydramatic, factory PB, Clock, Tach, Compass, Hood Jet 1959 Chevy SWB Fleetside BBW Custom Cab w/ rare stainless bed trim, #'s matching 283 V8 & Hydramatic, Deluxe Heat, radio, spotlight 1958 Chevy Cameo #'s matching 283 V8 & Hydramatic, radio, window washers, Factory PB 1958 GMC BBW SWB Fleetside Custom Cab, #'s matching 336 V8 Hydramatic, Factory PS, PB, Clock, RSD, Deluxe Heat & Hood Jet 1957 GMC Suburban Pickup (GMC's Cameo) #'s matching 347 V8 Hydramatic, uber-rare vacuum ashtray, Factory PS, PB, Clock, RSD, Hood Jet 1956 Chevy 3800 1 ton w/ rare 9 ft stepside bed, factory 265 V8 w/ Hydramatic, factory PB, Custom Cab, deluxe heat, spotlight and hood jet.

03-28-2016, 09:16 AM	#3
62step Registered User Join Date: Jan 2014 Location: Rock Hill SC Posts: 156	Re: 1962 C10 stepside project My lowered price is $3500. That takes everything. The wheel bearings were replaced about 5 years ago, I didn't blast and paint the frame the previous owner did. I was going to replace all new front end parts, but I just lost interest.

03-28-2016, 10:50 AM	#4
Brad54 Registered User Join Date: Aug 2006 Location: Athens, Georgia Posts: 1,458	Re: 1962 C10 stepside project Price on the cab? -Brad __________________ '61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School

03-28-2016, 11:00 AM	#5
62step Registered User Join Date: Jan 2014 Location: Rock Hill SC Posts: 156	Re: 1962 C10 stepside project I really want to wait on parting it out to see if someone will take the whole thing. I don't want to see it sit and go to waste, and I don't want to put anymore money into it. Without the motor and trans, come and get everything that belongs to the truck for $2500 (new wiring harness, new front fenders, new tailgate, 2 hoods, etc.) Thanks

03-28-2016, 11:44 AM	#6
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: 1962 C10 stepside project I sent you a PM with questions about the entire truck...thanks!

03-28-2016, 05:17 PM	#7
62step Registered User Join Date: Jan 2014 Location: Rock Hill SC Posts: 156	Re: 1962 C10 stepside project Pmed.

04-05-2016, 09:42 AM	#8
62step Registered User Join Date: Jan 2014 Location: Rock Hill SC Posts: 156	Re: 1962 C10 stepside project Here is a link to the craigslist ad. http://charlotte.craigslist.org/cto/5524230526.html

04-21-2016, 02:29 PM	#9
62step Registered User Join Date: Jan 2014 Location: Rock Hill SC Posts: 156	Re: 1962 C10 stepside project Sold.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.