Help! Need to find part ASAP - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DyerSDMFT · 03-12-2016, 01:51 PM

My husband is restoring a 1986 Chevy C-10. The man we bought her from had a jackwagon son in law that snatched the V-8 out and put a really bad V-6 in. My hubs is putting a V-8 back in but the Frame mounts won't line up, so he's trying to find engine frame mounts for a small block 350/V-8. We have found all kinds for cars but not for the C-10 pick up. Anyone know a good place to start our search? Need these ASAP as we have a scheduled trip planned and we need this truck right so we can make that trip!

chrismoore701 · 03-12-2016, 02:18 PM

These are two parts. The clamshell and the rubber. Depends on what is bad. Clam shells at a junk yard and the rubber check with classic parts of America. Take a couple days but pretty quick compared to others. You just drill the clam shell apart and then it bolts back together when you install it

**old Rusty C10** · 03-12-2016, 06:36 PM

if its a 231 v6 IIRC you just move the motor mounts over to different holes they should all be the same mount unless its a motor that didn't come stock in these trucks

DyerSDMFT · 03-12-2016, 10:16 PM

It's a motor swap from a straight 6 to a 5.7 liter 350. He is looking for the frame mounts not motor mounts. He has the clamshell, he has the motor mounts, he needs the frame mounts.

69heavychevy · 03-12-2016, 10:24 PM

I had the same issue when I bought my 80 C10.
I got mine from the local junkyard. I got lucky and found some laying around so I didn't have to pull a motor to get them.
73-98 sbc motor to frame mounts will work for sure. I got mine from a 97 suburban.

chrismoore701 · 03-12-2016, 10:25 PM

Gotcha. Not sure on that one

**MikeB** · 03-13-2016, 12:34 PM

My notes say 85-86 C10 small block "frame brackets" are GM #6271361 for driver side, and #6721362 for the passenger side. Those might be what you already have. They are the brackets that mount to the frame. The rubber motor mounts (or "cushions") bolt to these brackets. The clam shells then mount to the cushions.

I don't have the 85-86 clam shell P/Ns, but I can tell you from experience there are at least 4 different P/Ns for 79-84 trucks. All look very similar, but have have different "block surface to motor mount hole" dimensions.

FYI, below are GM descriptions of the above parts.

Frame brackets: "BRACKET, ENGINE MT FRAME"
Clam shells: "BRACKET, ENGINE MT"

I eventually found the P/Ns I needed for my 82 C10 at GMPartsWiki.com, but it takes a lot of patience!

03-12-2016, 01:51 PM	#1
DyerSDMFT Registered User Join Date: Mar 2016 Location: Eufaula Posts: 2	Help! Need to find part ASAP My husband is restoring a 1986 Chevy C-10. The man we bought her from had a jackwagon son in law that snatched the V-8 out and put a really bad V-6 in. My hubs is putting a V-8 back in but the Frame mounts won't line up, so he's trying to find engine frame mounts for a small block 350/V-8. We have found all kinds for cars but not for the C-10 pick up. Anyone know a good place to start our search? Need these ASAP as we have a scheduled trip planned and we need this truck right so we can make that trip!

03-12-2016, 02:18 PM	#2
chrismoore701 Registered User Join Date: Dec 2004 Location: Highland, IN Posts: 2,326	Re: Help! Need to find part ASAP These are two parts. The clamshell and the rubber. Depends on what is bad. Clam shells at a junk yard and the rubber check with classic parts of America. Take a couple days but pretty quick compared to others. You just drill the clam shell apart and then it bolts back together when you install it __________________ Chris _______________________________ 1979 Chevy Stepside SPORT 2018 Chevy Silverado, 39 years apart My build 2008-2016. http://m.imgur.com/a/bURrE

03-12-2016, 06:36 PM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Help! Need to find part ASAP if its a 231 v6 IIRC you just move the motor mounts over to different holes they should all be the same mount unless its a motor that didn't come stock in these trucks __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

03-12-2016, 10:16 PM	#4
DyerSDMFT Registered User Join Date: Mar 2016 Location: Eufaula Posts: 2	Re: Help! Need to find part ASAP It's a motor swap from a straight 6 to a 5.7 liter 350. He is looking for the frame mounts not motor mounts. He has the clamshell, he has the motor mounts, he needs the frame mounts.

03-12-2016, 10:24 PM	#5
69heavychevy Registered User Join Date: Jan 2007 Location: Garland,TX Posts: 431	Re: Help! Need to find part ASAP I had the same issue when I bought my 80 C10. I got mine from the local junkyard. I got lucky and found some laying around so I didn't have to pull a motor to get them. 73-98 sbc motor to frame mounts will work for sure. I got mine from a 97 suburban. __________________ 80 C10 SWB Step Side - 350 w/ vortec heads, TH350, 12-bolt 3.73

03-12-2016, 10:25 PM	#6
chrismoore701 Registered User Join Date: Dec 2004 Location: Highland, IN Posts: 2,326	Re: Help! Need to find part ASAP Gotcha. Not sure on that one __________________ Chris _______________________________ 1979 Chevy Stepside SPORT 2018 Chevy Silverado, 39 years apart My build 2008-2016. http://m.imgur.com/a/bURrE

03-13-2016, 12:34 PM	#7
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,597	Re: Help! Need to find part ASAP My notes say 85-86 C10 small block "frame brackets" are GM #6271361 for driver side, and #6721362 for the passenger side. Those might be what you already have. They are the brackets that mount to the frame. The rubber motor mounts (or "cushions") bolt to these brackets. The clam shells then mount to the cushions. I don't have the 85-86 clam shell P/Ns, but I can tell you from experience there are at least 4 different P/Ns for 79-84 trucks. All look very similar, but have have different "block surface to motor mount hole" dimensions. FYI, below are GM descriptions of the above parts. Frame brackets: "BRACKET, ENGINE MT FRAME" Clam shells: "BRACKET, ENGINE MT" I eventually found the P/Ns I needed for my 82 C10 at GMPartsWiki.com, but it takes a lot of patience! __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.