|
03-13-2016, 07:48 PM
|
#1 |
|
Registered User
Join Date: Aug 2011
Location: houston texas
Posts: 10
|
transmission woes
does anybody know what years chevy used a fully synchronized 3 speed in their half ton trucks. have a 65 would like to use fully synchronized in it. and keep it 3 on the tree. has anybody tried this before, and what would i need to swap it out
|
|
|
|
03-14-2016, 12:29 AM
|
#2 |
|
Registered User
Join Date: Jan 2014
Location: Wasilla Alaska
Posts: 537
|
Re: transmission woes
it will bolt right up and if you have the long tailshaft the drive line just might be the same also. the linkage rods are a bit different but some guys are maken em work just fine. I think GM might have put some in the 65 I know they used em 66
|
|
|
|
|
03-14-2016, 01:31 AM
|
#3 |
|
Registered User
Join Date: Jun 2013
Location: Carlsbad, California
Posts: 165
|
Re: transmission woes
A friend had a 3 speed full syncro in a '71 1/2 ton FWD. I never liked driving it that much. I had a muncie 4 speed in my '67 C10 that was much more satisfying. I would look for one of those unless you are set on a column shift.
Russ
__________________
RC |
|
|
|
|
03-14-2016, 04:09 PM
|
#4 |
|
Registered User
Join Date: Aug 2011
Location: houston texas
Posts: 10
|
Re: transmission woes
would like to keep it as close to original as possible but would like full synchronized on the tree
|
|
|
|
|
03-14-2016, 06:42 PM
|
#5 |
|
Registered User
Join Date: Apr 2013
Location: South Westerlo, New York
Posts: 1,325
|
Re: transmission woes
http://www.drivetrain.com/parts_cata...peeds_v24.html hope this helps..
__________________
Thanks, Joe.. 1969 C/10, 348 C.I., 3X2 bbl. V8, 2004r , LWB. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
