Radiator fittings for trans cooler lines??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nodnarb76 · 04-03-2016, 03:58 PM

Ran into a problem with my LS swap on my 87 Suburban.
I don't have the correct fittings to attach my transmission cooler lines with 6an connectors to my radiator. Using an Enytopy radiator by the way.

**mongocanfly** · 04-03-2016, 05:13 PM

You'll have to know what size/threads those bungs are..if you don't know contact them to find out what you need,, would be my suggestion.

qwik · 04-03-2016, 05:25 PM

Most are 1/2-20 straight thread, I've used 6an to 1/2-20 flare fittings with an o-ring.

Willie Makeit · 04-04-2016, 10:38 AM

Qwik is correct in that it is straight 1/2"-20 threads but it is also an inverted flare fitting. you'll need something like this to connect it to an AN fitting.

http://www.ebay.com/itm/230894574606...%3AMEBIDX%3AIT

**Hart_Rod** · 04-05-2016, 12:34 PM

Quote:

Originally Posted by Nodnarb76

Ran into a problem with my LS swap on my 87 Suburban.
I don't have the correct fittings to attach my transmission cooler lines with 6an connectors to my radiator. Using an Enytopy radiator by the way.

Whose radiator do you have? Entropy suggest using a 5/16" inverted flare to a 6AN fitting in their radiator.

roushinator · 04-05-2016, 01:14 PM

Quote:

Originally Posted by Hart_Rod

Whose radiator do you have? Entropy suggest using a 5/16" inverted flare to a 6AN fitting in their radiator.

Glad to know i was about to order some.

04-03-2016, 03:58 PM	#1
Nodnarb76 Registered User Join Date: May 2013 Location: Mississippi Posts: 501	Radiator fittings for trans cooler lines??? Ran into a problem with my LS swap on my 87 Suburban. I don't have the correct fittings to attach my transmission cooler lines with 6an connectors to my radiator. Using an Enytopy radiator by the way. Attached Images __________________ 1987 R20 Suburban LQ4/4L80e swap: http://67-72chevytrucks.com/vboard/s...d.php?t=693824

04-03-2016, 05:13 PM	#2
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: Radiator fittings for trans cooler lines??? You'll have to know what size/threads those bungs are..if you don't know contact them to find out what you need,, would be my suggestion.

04-03-2016, 05:25 PM	#3
qwik Registered User Join Date: Sep 2015 Location: Savannah GA Posts: 51	Re: Radiator fittings for trans cooler lines??? Most are 1/2-20 straight thread, I've used 6an to 1/2-20 flare fittings with an o-ring.

04-04-2016, 10:38 AM	#4
Willie Makeit Registered User Join Date: Oct 2013 Location: Alabama Posts: 1,234	Re: Radiator fittings for trans cooler lines??? Qwik is correct in that it is straight 1/2"-20 threads but it is also an inverted flare fitting. you'll need something like this to connect it to an AN fitting. http://www.ebay.com/itm/230894574606...%3AMEBIDX%3AIT



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.