Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
05-22-2016, 12:15 PM | #1 |
Registered User
Join Date: Mar 2012
Location: Gallipolis, Ohio
Posts: 296
|
5.3 injector/harness???
I have a harness to fit a 04 5.3 but my motor which i thought was a 04 has a different injector plug than my harness. The pins in my injectors are offset and the harness is in the center. So are my injectors considered the ev6 and my harness ev1?
|
05-22-2016, 01:47 PM | #2 |
meowMEOWmeowMEOW
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
|
Re: 5.3 injector/harness???
Trucks had a MultecII connector, assuming you've got the short-fat injectors.
For comparison EV1 Ev6 MultecII
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
|
05-22-2016, 02:02 PM | #3 |
Registered User
Join Date: Mar 2012
Location: Gallipolis, Ohio
Posts: 296
|
Re: 5.3 injector/harness???
Are the pin locations different on older motors? The pins on my injectors are more to the bottom and on the harness i have it looks centered.
|
05-22-2016, 02:10 PM | #4 |
Registered User
Join Date: Mar 2012
Location: Gallipolis, Ohio
Posts: 296
|
Re: 5.3 injector/harness???
My injectors look like this
|
05-22-2016, 03:59 PM | #5 |
Registered User
Join Date: Mar 2012
Location: Gallipolis, Ohio
Posts: 296
|
Re: 5.3 injector/harness???
My harness is made to fit this type
|
05-23-2016, 01:50 PM | #6 |
Registered User
Join Date: Oct 2012
Location: Detroit
Posts: 748
|
Re: 5.3 injector/harness???
Your injectors are EV6, the harness is set up for multecII. They sell adapters or you can just change the plugs and terminals. Wiring is the same.
__________________
Brandon Instagram: DRVFSTR Current Project: Beatrix - 1967 SWB LQ4/78mm Turbo/4L80e/ on bags Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=634691 |
05-23-2016, 02:18 PM | #7 |
Registered User
Join Date: Mar 2012
Location: Gallipolis, Ohio
Posts: 296
|
Re: 5.3 injector/harness???
Thanks for your help. I just talked to a guy at casper electronics about this adapter.
|
Bookmarks |
|
|