|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-24-2016, 12:34 AM
|
#1 |
|
Registered User
Join Date: Jul 2014
Location: Michie TN
Posts: 13
|
Looking for suggestions for my Street and Some Strip 72
Hi guys, I've been doing some upgrades on my old 72 SWB and I'm at a crossroads. To spray or not to spray. Truck started out as a weekend toy and ended up at the drag strip and I love it ! Built the stock 350 .30 over, SRP Forged flat tops, Vortec heads with screw in studs and guide plates, 500 lift solid flat tappet cam,254/254 at.50 and 110/118 llobe Sep ,MSD pro billet distributor,6AL box with 6200 pill,Stock crank polished and balanced, forged Scat I beam rods, RPM Air Gap intake, AED 750 HP/HO carb, TH350 with shift kit, 2600 Stall, Detroit True Trac rear end with 373 gear and 275/60/15 on 8 in rally it went 8.30 at 80 mph. 60ft sucked at 2.1 on street tires..Looking at getting some new MT ET Street SS in 275/60/15 or ET Street R in 255/60/15 to give me a little more gear..What would you next besides drag radials to get me in the high 7"s and still be stretchable ?
Tapped the rings for a 150 shot but want to get in the 7"s without NOS. Thanks Mark |
|
|
|
05-24-2016, 03:02 AM
|
#2 |
|
Registered User
Join Date: Jul 2014
Location: Michie TN
Posts: 13
|
Re: Looking for suggestions for my Street and Some Strip 72
Streetable not Strechable ! Damn autocorrect
|
|
|
|
|
05-24-2016, 07:37 AM
|
#3 |
|
Registered User
Join Date: Dec 2010
Location: Arkansas
Posts: 608
|
Re: Looking for suggestions for my Street and Some Strip 72
Thats a whole lot of .050 for that engine combo. Just a thought. Also I would start with trying to get the 60 ft time to drop off some. Of course without NOS.
|
|
|
|
|
05-24-2016, 10:07 AM
|
#4 |
|
Registered User
Join Date: Nov 2007
Location: Bay Area, Ca
Posts: 2,841
|
Re: Looking for suggestions for my Street and Some Strip 72
I was thinking along the similar lines, 254* @ .050 is a lot for that little of cubic inches and paired with a 2,600 rpm converter is adding to the lack of 60'.
__________________
------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49 |
|
|
|
|
05-24-2016, 12:31 PM
|
#5 |
|
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,892
|
Re: Looking for suggestions for my Street and Some Strip 72
What have you taken out of it weight wise? What shock and spring are you running? I am assuming it is still trailing arm. What gear?
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! |
|
|
|
|
05-24-2016, 07:36 PM
|
#6 |
|
Registered User
Join Date: Dec 2010
Location: Arkansas
Posts: 608
|
Re: Looking for suggestions for my Street and Some Strip 72
Is that 750 a DP or Vacuum secondary?
|
|
|
|
|
05-24-2016, 08:51 PM
|
#7 |
|
Registered User
Join Date: Jul 2014
Location: Michie TN
Posts: 13
|
Re: Looking for suggestions for my Street and Some Strip 72
The truck is stock 3900 lbs so no weight taken out. I'm running a 373 gear. And the AED carb is a double pumper,75 jets in the front and 85 in the rear. I called AED and told them what I had and that's what they sent me..As far as shocks it's bone stock but I'm about to adjustable for front and rear and yes it's still trailing arm . Thanks
Mark |
|
|
|
|
05-25-2016, 07:32 PM
|
#8 |
|
Registered User
Join Date: Dec 2010
Location: Arkansas
Posts: 608
|
Re: Looking for suggestions for my Street and Some Strip 72
I think these two changes would help.
http://www.summitracing.com/parts/cc...make/chevrolet 750 Vac. Just my thought. Last edited by Blue Rat; 05-25-2016 at 07:55 PM. |
|
|
|
|
05-31-2016, 09:45 PM
|
#9 |
|
Registered User
Join Date: Dec 2015
Location: Rossville Kansas
Posts: 28
|
Re: Looking for suggestions for my Street and Some Strip 72
Oh yea convert to roller cam and roller lifters.
|
|
|
|
|
06-05-2016, 07:53 PM
|
#10 |
|
Registered User
Join Date: Dec 2010
Location: Arkansas
Posts: 608
|
Re: Looking for suggestions for my Street and Some Strip 72
Well, hope he didn't get aggravated. I was just posting my thoughts on what I though could help.
|
|
|
|
|
06-06-2016, 12:45 AM
|
#11 |
|
meowMEOWmeowMEOW
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
|
Re: Looking for suggestions for my Street and Some Strip 72
He hasn't logged in since 5-25 and only has a few posts. Maybe he hasn't even worked on it, or maybe he just popped in for some info and thats it (it happens a lot, and thats ok). I wouldn't worry too much about it dude.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING  |
|
|
|
|
| Bookmarks |
|
|
\\ MY YOUTUBE CHANNEL
Linear Mode
