Hopefully a simple question. Blazer frame.

[lyrikz]

The rear end of my blazer has taken a beating. The PO had a hitch welded in, a bumper welded in and its just beat up back there. I want to replace the back 12 inches or so. Do they sell c channel roughly that size that i could cut the old out and weld in some new metal? Im not having any luck finding a frame i can use as a donor.

Thanks guy.s

[Lieferson]

Call up Frank at pickmups in Olympia. he can probably help you out. 360-956-7170

[lyrikz]

Left him a message.

[1rippen6]

4x4 or 2wd and what year I might be able to help.

[lyrikz]

Originally Posted by 1rippen6

4x4 or 2wd and what year I might be able to help.

1971 4wd.

[1rippen6]

I have some frame channel from a 72 I cut up if you measure the channel width I can check and see if it is the same.

[lyrikz]

Originally Posted by 1rippen6

I have some frame channel from a 72 I cut up if you measure the channel width I can check and see if it is the same.

I will measure the inside width and get back to you today.... Thanks for the help.

[cleszkie]

The rear 72 frame rails extend all the way out to the bumper and require different bumper brackets, and gravel shields than a 71. Also, your 71 will not have the cutouts along the rear lower panel of the body to clear the frame rails. Just some things to consider if you go with 72 rear rails instead of 71 rails.

[1rippen6]

Originally Posted by cleszkie

The rear 72 frame rails extend all the way out to the bumper and require different bumper brackets, and gravel shields than a 71. Also, your 71 will not have the cutouts along the rear lower panel of the body to clear the frame rails. Just some things to consider if you go with 72 rear rails instead of 71 rails.

I was not talking about the very end I have both complete frame rails cut into pieces was thinking maybe a section will meet the measurements he needs and will be able to use that. 71 and 72 both have the same outer bumper brackets only difference is a 71 you would need the inner brackets and the 72 bolts right to the frame rail.

[Onelow69chev]

Ive got a rolling bare blazer frame Im selling for $200 if youre interested. Not sure if you already fixed yours.
425-231-8780 Don

[lyrikz]

Originally Posted by Onelow69chev

Ive got a rolling bare blazer frame Im selling for $200 if youre interested. Not sure if you already fixed yours.
425-231-8780 Don

YEESSS... You are in cleelum, we drive through there about twice a month.

4wd frame im assuming... I really just need the back section of the frame.
When can i come take a peak at it? This weekend i have a wedding, but im free next.

[lyrikz]

Originally Posted by Onelow69chev

Ive got a rolling bare blazer frame Im selling for $200 if youre interested. Not sure if you already fixed yours.
425-231-8780 Don

I left you a few pms.

Thanks Don.