Sanden Type compressor Pulley Help needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72MARIO · 06-22-2016, 06:59 PM

I currently have a Old air kit in my 1968 suburban. The compressor has a 2 grove v belt pulley. I need to change it out to a serpentine belt type pulley and clutch.

Does anyone know a stock vehicle application for a Sanden serpentine pulley ?

I am in the process of installing a 6.0/4l80 and really don't want to open the system and change the compressor.

Thanks, Mario

ls1nova71 · 06-22-2016, 08:41 PM

Our Mack tractors at work have them. Lol! Probably won't find them in a pick n pull.... I've seen them on some older jeeps there though.

72MARIO · 06-23-2016, 08:53 PM

Any specfic Mack tractor? I really dont want to change the complete compressor unit.

ls1nova71 · 06-23-2016, 09:05 PM

Quote:

Originally Posted by 72MARIO

Any specfic Mack tractor? I really dont want to change the complete compressor unit.

2006 CXN is the Mack, but a 97-01 grand Cherokee compressor would be easier to come by I would think.

72MARIO · 06-23-2016, 09:09 PM

I never thought too look at out old 1996 4.0 jeep grand cherokee... I might get luck there

I looked at it sure looks like a sanden compressor. It was too dark to count the groves in the pulley.

77c10 · 06-28-2016, 01:53 PM

I had to do the same thing, I ordered the new clutch/pulley from Summit Racing and just swapped the pulley. I searched and searched and searched for just the pulley but didn't have any luck. It took all of 5 minutes to change it out.

72MARIO · 06-28-2016, 10:45 PM

well the 1996 jeep grand Cherokee is not the sanden type compressor. Still on the hunt for a factory pulley. If I was american summit would be a no brainier, but being in Canada it would cost me nearly double

LSpwr50 · 08-14-2016, 08:43 PM

Quote:

Originally Posted by 72MARIO

I currently have a Old air kit in my 1968 suburban. The compressor has a 2 grove v belt pulley. I need to change it out to a serpentine belt type pulley and clutch.

Does anyone know a stock vehicle application for a Sanden serpentine pulley ?

I am in the process of installing a 6.0/4l80 and really don't want to open the system and change the compressor.

Thanks, Mario

1982-1990 Cherokee 4.0 uses a 6 rib Sanden compressor. It's what I used on an Lt1 swapped Volvo I built.

06-22-2016, 06:59 PM	#1
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,051	Sanden Type compressor Pulley Help needed I currently have a Old air kit in my 1968 suburban. The compressor has a 2 grove v belt pulley. I need to change it out to a serpentine belt type pulley and clutch. Does anyone know a stock vehicle application for a Sanden serpentine pulley ? I am in the process of installing a 6.0/4l80 and really don't want to open the system and change the compressor. Thanks, Mario __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

06-22-2016, 08:41 PM	#2
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: Sanden Type compressor Pulley Help needed Our Mack tractors at work have them. Lol! Probably won't find them in a pick n pull.... I've seen them on some older jeeps there though. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

06-23-2016, 08:53 PM	#3
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,051	Re: Sanden Type compressor Pulley Help needed Any specfic Mack tractor? I really dont want to change the complete compressor unit. __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

06-23-2016, 09:09 PM	#5
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,051	Re: Sanden Type compressor Pulley Help needed I never thought too look at out old 1996 4.0 jeep grand cherokee... I might get luck there I looked at it sure looks like a sanden compressor. It was too dark to count the groves in the pulley. __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD Last edited by 72MARIO; 06-23-2016 at 09:31 PM.

06-28-2016, 01:53 PM	#6
77c10 Registered User Join Date: Aug 2011 Location: Gallatin, TN Posts: 782	Re: Sanden Type compressor Pulley Help needed I had to do the same thing, I ordered the new clutch/pulley from Summit Racing and just swapped the pulley. I searched and searched and searched for just the pulley but didn't have any luck. It took all of 5 minutes to change it out. __________________ 77 C10, 6.0LS/4L80E, 3:73 12 bolt. Boss 338's 20" x 10" w/ 285/50/20 rear. 20" x 8.5" w/ 245/40/20 front. Vintage Air. Full Autometer gauges recessed in factory bezel (Thanks bigblock73!) Gm Storm Grey Metallic paint "Cool ain't ever cheap and cheap ain't ever cool"

06-28-2016, 10:45 PM	#7
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,051	Re: Sanden Type compressor Pulley Help needed well the 1996 jeep grand Cherokee is not the sanden type compressor. Still on the hunt for a factory pulley. If I was american summit would be a no brainier, but being in Canada it would cost me nearly double __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.