TX 1977 GMC SWB stepside parts truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

f.monroe · 06-26-2016, 10:40 PM

I have a non titled parts truck for sale. I do not have time to part it out so it's for sale as it sits. It has its original tilt steering column,original bucket seats and console, 12 bolt rear, 15×7 front and 15×8 rear rallies and a cool retro roll bar that bolts to the top of the bed. Its a rough truck. Passenger rear fender is dented and the cab is rusty in places. Basically it's a storage unit for the parts listed.
$700 and its yours.
Frank

Pm me if interested and I'll try to check this thread regularly. I'm very busy at work so that's why I am not able to separate the parts.

f.monroe · 06-26-2016, 10:41 PM

And

Trust_me · 06-27-2016, 12:39 AM

Front grill available?

bbbc10 · 06-27-2016, 02:30 AM

Man them buckets an console an the rallys i need!!!

**1774btcrew** · 06-27-2016, 12:38 PM

Quote:

Originally Posted by bbbc10

Man them buckets an console an the rallys i need!!!

It looks like you are only over 3 hours away from him. Hook up a trailer and go pick it up! I know if I was close, I would already own it!

f.monroe · 06-27-2016, 07:51 PM

I'm not fIrm so come on down here and get you some parts

MONTEZ · 06-28-2016, 07:01 PM

what shape is the bed in?

f.monroe · 06-28-2016, 08:58 PM

I'd have to look but the drivers side fender is nice. The passenger side has a dent . tailgate is bent if I remember correctly. I can look at the bed structure if needed.

**special-K** · 07-03-2016, 08:24 AM

Can I get a picture of the roll bar/cab protector?

f.monroe · 07-03-2016, 09:18 PM

Here you go

f.monroe · 07-03-2016, 09:20 PM

And

f.monroe · 07-03-2016, 10:02 PM

And

Lowered13 · 07-10-2016, 05:48 PM

Would you consider selling me the seat-belts if they are the original 3 point harness type?

f.monroe · 09-04-2016, 09:31 PM

$500

f.monroe · 09-07-2016, 11:54 PM

Quote:

Originally Posted by Beto1976

Have a GMC grille for sale

Don't post parts for sale as a response to other peoples ads. You have to be a supporting member (name can't be pink) to post items for sale. I noticed you posted that grille in a couple of ads. I imagine you tried to start a post and couldn't. Theres a reason for that.
f.monroe
Notice that all for sale ads have user id's that aren't pink.

**HIGHWAY BY THE SEA** · 09-08-2016, 02:28 AM

I sure could use that roll bar!!! Those things are impossible to find where I live.

**HIGHWAY BY THE SEA** · 09-13-2016, 06:43 PM

PM sent for roll bar...

**HIGHWAY BY THE SEA** · 09-27-2016, 08:56 PM

Hey Frank, I still have not heard back from you about the shipping priceon this roll bar. Have you heard anything yet?

f.monroe · 09-28-2016, 10:30 PM

No I'm sorry I haven't. They said I would have to package it and take it to the terminal to get a price. They won't ship anything that's not wrapped. I haven't had time. We had our county fair over last week and it was my youngest sons senior year. We had to get animals ready and basically was there the whole week getting his animals taken care of and shown.
Frank

f.monroe · 10-01-2016, 09:35 PM

Sold

06-26-2016, 10:40 PM	#1
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	1977 GMC SWB stepside parts truck I have a non titled parts truck for sale. I do not have time to part it out so it's for sale as it sits. It has its original tilt steering column,original bucket seats and console, 12 bolt rear, 15×7 front and 15×8 rear rallies and a cool retro roll bar that bolts to the top of the bed. Its a rough truck. Passenger rear fender is dented and the cab is rusty in places. Basically it's a storage unit for the parts listed. $700 and its yours. Frank Pm me if interested and I'll try to check this thread regularly. I'm very busy at work so that's why I am not able to separate the parts. Attached Images __________________ Born and proudly residing in a Red State !

06-26-2016, 10:41 PM	#2
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 1977 GMC SWB stepside parts truck And Attached Images __________________ Born and proudly residing in a Red State !

06-27-2016, 12:39 AM	#3
Trust_me Registered User Join Date: Aug 2012 Location: OHIO Posts: 73	Re: 1977 GMC SWB stepside parts truck Front grill available?

06-27-2016, 02:30 AM	#4
bbbc10 Diggin The SquareLife Join Date: Dec 2010 Location: garland,tx Posts: 1,933	Re: 1977 GMC SWB stepside parts truck Man them buckets an console an the rallys i need!!!

06-27-2016, 07:51 PM	#6
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 1977 GMC SWB stepside parts truck I'm not fIrm so come on down here and get you some parts __________________ Born and proudly residing in a Red State !

06-28-2016, 07:01 PM	#7
MONTEZ Registered User Join Date: May 2010 Location: Nacogdoches,Texas Posts: 330	Re: 1977 GMC SWB stepside parts truck what shape is the bed in? __________________ Smoke Tires, not Drugs

06-28-2016, 08:58 PM	#8
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 1977 GMC SWB stepside parts truck I'd have to look but the drivers side fender is nice. The passenger side has a dent . tailgate is bent if I remember correctly. I can look at the bed structure if needed. __________________ Born and proudly residing in a Red State !

07-03-2016, 08:24 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1977 GMC SWB stepside parts truck Can I get a picture of the roll bar/cab protector? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-03-2016, 09:18 PM	#10
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 1977 GMC SWB stepside parts truck Here you go Attached Images __________________ Born and proudly residing in a Red State !

07-03-2016, 09:20 PM	#11
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 1977 GMC SWB stepside parts truck And Attached Images __________________ Born and proudly residing in a Red State !

07-03-2016, 10:02 PM	#12
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 1977 GMC SWB stepside parts truck And Attached Images __________________ Born and proudly residing in a Red State !

07-10-2016, 05:48 PM	#13
Lowered13 Registered User Join Date: May 2012 Location: Bangor Maine Posts: 84	Re: 1977 GMC SWB stepside parts truck Would you consider selling me the seat-belts if they are the original 3 point harness type?

09-04-2016, 09:31 PM	#14
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 1977 GMC SWB stepside parts truck $500 __________________ Born and proudly residing in a Red State !

09-08-2016, 02:28 AM	#16
HIGHWAY BY THE SEA Senior Member Join Date: Nov 2012 Location: BY THE CAROLINA SEA Posts: 922	Re: 1977 GMC SWB stepside parts truck I sure could use that roll bar!!! Those things are impossible to find where I live. __________________ FRANKENTRUCK 1981 Chevrolet C10 Shortbed Stepside GRANDTRUCK 1968 Chevrolet C10 Stepside Longbed http://67-72chevytrucks.com/vboard/s...d.php?t=584617 PROJECT JIGSAW 1967 GMC C3500 GREAT WHITE 1986 Blazer M1009 454 engine w/700R4 transmission gas conversion

09-13-2016, 06:43 PM	#17
HIGHWAY BY THE SEA Senior Member Join Date: Nov 2012 Location: BY THE CAROLINA SEA Posts: 922	Re: 1977 GMC SWB stepside parts truck PM sent for roll bar... __________________ FRANKENTRUCK 1981 Chevrolet C10 Shortbed Stepside GRANDTRUCK 1968 Chevrolet C10 Stepside Longbed http://67-72chevytrucks.com/vboard/s...d.php?t=584617 PROJECT JIGSAW 1967 GMC C3500 GREAT WHITE 1986 Blazer M1009 454 engine w/700R4 transmission gas conversion



Register or Log In To remove these advertisements.

09-27-2016, 08:56 PM	#18
HIGHWAY BY THE SEA Senior Member Join Date: Nov 2012 Location: BY THE CAROLINA SEA Posts: 922	Re: 1977 GMC SWB stepside parts truck Hey Frank, I still have not heard back from you about the shipping priceon this roll bar. Have you heard anything yet? __________________ FRANKENTRUCK 1981 Chevrolet C10 Shortbed Stepside GRANDTRUCK 1968 Chevrolet C10 Stepside Longbed http://67-72chevytrucks.com/vboard/s...d.php?t=584617 PROJECT JIGSAW 1967 GMC C3500 GREAT WHITE 1986 Blazer M1009 454 engine w/700R4 transmission gas conversion

09-28-2016, 10:30 PM	#19
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 1977 GMC SWB stepside parts truck No I'm sorry I haven't. They said I would have to package it and take it to the terminal to get a price. They won't ship anything that's not wrapped. I haven't had time. We had our county fair over last week and it was my youngest sons senior year. We had to get animals ready and basically was there the whole week getting his animals taken care of and shown. Frank __________________ Born and proudly residing in a Red State !

10-01-2016, 09:35 PM	#20
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 1977 GMC SWB stepside parts truck Sold __________________ Born and proudly residing in a Red State !

Register or Log In To remove these advertisements.