The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-02-2016, 10:29 AM   #1
ChrisAunchman
Registered User
 
Join Date: Oct 2011
Location: Middleboro, MA
Posts: 55
Disc conversion kit from Captain Fab /w pics

Hey All,
Just wanted to post some pictures of my recent disc conversion. I ended up going with Captian Fabs kit that uses the D52 calipers, and astro van rotors. I am using the standard D52 caliper instead of the one that has the e-brake lever from the el durado. Big cost savings. For the e-brake I plane on utilizing a hydraulic type they use in drifting and work it off the existing lever in the cab.

Everything in this kit went together perfectly. There were ZERO issues with fitment. This is the first time I actually bought a custom kit were I didn't have to grind or knock new holes in it. This is a true bolt together kit. Calipers are perfectly centered on the rotor. COuldn't ask for a better conversion kit. I would HIGHLY recommend his kits. IN fact a guy that runs a shop near me that is a true perfectionist couldn't believe how nice this kit was. I also went with his P/S adapter plate up front and that too is really nice.

Have a great 4th!

Chris
Attached Images
     
ChrisAunchman is offline   Reply With Quote
Old 07-02-2016, 10:58 AM   #2
lolife99
67-72 parts collector,…
 
lolife99's Avatar
 
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,700
Re: Disc conversion kit from Captain Fab /w pics

I highly agree!
Captain Fab makes QUALITY products.
__________________
Keith

Convert to disc brakes.
http://67-72chevytrucks.com/vboard/s...d.php?t=444823
lolife99 is offline   Reply With Quote
Old 07-02-2016, 01:39 PM   #3
zach_carver
Registered User
 
zach_carver's Avatar
 
Join Date: Aug 2014
Location: Blue Ridge,GA
Posts: 508
Re: Disc conversion kit from Captain Fab /w pics

Is there an exact parts list you used? As far as brake pads, rotors, and brake lines? This looks awesome!!!
__________________
1965 C10 LS2/4l70, WHITE, 5/7 DROP

LINK TO SUPER SNOOPY C10 BUILD---> http://67-72chevytrucks.com/vboard/s...d.php?t=689283

1977 C10 SILVERADO HAWAIIAN BLUE, 5/5" DROP, LS6/4L80E

1976 CHEVY K5, 350/350, YUBA GOLD/SADDLE
zach_carver is offline   Reply With Quote
Old 07-02-2016, 10:09 PM   #4
ChrisAunchman
Registered User
 
Join Date: Oct 2011
Location: Middleboro, MA
Posts: 55
Re: Disc conversion kit from Captain Fab /w pics

Yes, I have all the boxes at my garage I'll get the exact P/Ns for you. It was very affordable too, cheaper than rebuilding the drums and less of a headache.
ChrisAunchman is offline   Reply With Quote
Old 07-02-2016, 10:12 PM   #5
zach_carver
Registered User
 
zach_carver's Avatar
 
Join Date: Aug 2014
Location: Blue Ridge,GA
Posts: 508
Re: Disc conversion kit from Captain Fab /w pics

Quote:
Originally Posted by ChrisAunchman View Post
Yes, I have all the boxes at my garage I'll get the exact P/Ns for you. It was very affordable too, cheaper than rebuilding the drums and less of a headache.
Thanks a lot! Was this a 6 or 5 lug conversion?
__________________
1965 C10 LS2/4l70, WHITE, 5/7 DROP

LINK TO SUPER SNOOPY C10 BUILD---> http://67-72chevytrucks.com/vboard/s...d.php?t=689283

1977 C10 SILVERADO HAWAIIAN BLUE, 5/5" DROP, LS6/4L80E

1976 CHEVY K5, 350/350, YUBA GOLD/SADDLE
zach_carver is offline   Reply With Quote
Old 07-02-2016, 11:08 PM   #6
lolife99
67-72 parts collector,…
 
lolife99's Avatar
 
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,700
Re: Disc conversion kit from Captain Fab /w pics

This conversion uses Astro van rotors.
So it's a 5-lug conversion.
5x5 bolt pattern.
__________________
Keith

Convert to disc brakes.
http://67-72chevytrucks.com/vboard/s...d.php?t=444823
lolife99 is offline   Reply With Quote
Old 07-02-2016, 11:56 PM   #7
SierraMtns
Registered User
 
SierraMtns's Avatar
 
Join Date: Jun 2014
Location: Shingle Springs, CA
Posts: 869
Re: Disc conversion kit from Captain Fab /w pics

Quote:
Originally Posted by ChrisAunchman View Post
Hey All,
Just wanted to post some pictures of my recent disc conversion. I ended up going with Captian Fabs kit that uses the D52 calipers, and astro van rotors. I am using the standard D52 caliper instead of the one that has the e-brake lever from the el durado. Big cost savings. For the e-brake I plane on utilizing a hydraulic type they use in drifting and work it off the existing lever in the cab.

Everything in this kit went together perfectly. There were ZERO issues with fitment. This is the first time I actually bought a custom kit were I didn't have to grind or knock new holes in it. This is a true bolt together kit. Calipers are perfectly centered on the rotor. COuldn't ask for a better conversion kit. I would HIGHLY recommend his kits. IN fact a guy that runs a shop near me that is a true perfectionist couldn't believe how nice this kit was. I also went with his P/S adapter plate up front and that too is really nice.

Have a great 4th!

Chris
Looks good Chris. I would like to see some pictures on how you are running the e-brake setup.
SierraMtns is offline   Reply With Quote
Old 07-03-2016, 11:54 AM   #8
ChrisAunchman
Registered User
 
Join Date: Oct 2011
Location: Middleboro, MA
Posts: 55
Re: Disc conversion kit from Captain Fab /w pics

Will do, it will be a bit before I plumb the hard lines, moving onto the motor and tranny next. Already have a built 700R4, so now it's just getting the block to the machine shop. It'll be something like this though.
http://www.ebay.com/itm/Universal-Ra...-/131071217760

Get rid of the handle and just work it off a cable. it goes inline with the rear brake line.
ChrisAunchman is offline   Reply With Quote
Old 07-03-2016, 04:05 PM   #9
bbbc10
Diggin The SquareLife
 
Join Date: Dec 2010
Location: garland,tx
Posts: 1,933
Re: Disc conversion kit from Captain Fab /w pics

looks great in for part numbers
bbbc10 is offline   Reply With Quote
Old 07-13-2016, 09:40 PM   #10
Agent915
Registered User
 
Join Date: Oct 2009
Location: Alabama
Posts: 228
Re: Disc conversion kit from Captain Fab /w pics

I'd be interested in that parts list as well!
Agent915 is offline   Reply With Quote
Old 07-13-2016, 10:20 PM   #11
ChrisAunchman
Registered User
 
Join Date: Oct 2011
Location: Middleboro, MA
Posts: 55
Re: Disc conversion kit from Captain Fab /w pics

Will do....Hopefully will get to the shop this weekend....Been house shopping for the sat few weeks so no time to play......Researched the hydraulic brake thing and it is very do-able...I've been keeping a very detailed receipt binder of everything I put into this truck.
ChrisAunchman is offline   Reply With Quote
Old 06-20-2017, 09:28 PM   #12
Dmaxmoe
Registered User
 
Join Date: Apr 2017
Location: Calgary, Alberta
Posts: 22
Re: Disc conversion kit from Captain Fab /w pics

Any updates?
Dmaxmoe is offline   Reply With Quote
Old 03-24-2018, 03:40 PM   #13
jumbogem29
Registered User
 
Join Date: Feb 2018
Location: montgomery al
Posts: 8
Re: Disc conversion kit from Captain Fab /w pics

Any Parts list for this conversion out there.
jumbogem29 is offline   Reply With Quote
Old 03-25-2018, 12:33 AM   #14
66 C10 383
Senior Member
 
Join Date: Aug 2012
Location: Somewhere In So. IL.
Posts: 412
Re: Disc conversion kit from Captain Fab /w pics

Quote:
Originally Posted by jumbogem29 View Post
Any Parts list for this conversion out there.
Here's the guy that makes that exact kit. I bet he'll have all the answers.

http://www.67-72chevytrucks.com/vboa...d.php?t=398352

He's got all kinds of high quality products. Very helpful and knowledgeble vendor and member that's still here to this day.
__________________
Doug

Old Build Thread - 383/T56
http://www.67-72chevytrucks.com/vboa...d.php?t=540838

Updated Build Thread - Modern Relic - 66 C10 536 Dark Aqua
5.3/4L60E - BTR Stage IV Truck Cam - Vintage Air - Dakota Digital
http://67-72chevytrucks.com/vboard/s...d.php?t=778784
66 C10 383 is offline   Reply With Quote
Old 03-25-2018, 01:28 AM   #15
Richard2112
Registered User
 
Richard2112's Avatar
 
Join Date: Jul 2014
Location: South East Ohio
Posts: 644
Re: Disc conversion kit from Captain Fab /w pics

That is some nice lookin' work.
Richard2112 is offline   Reply With Quote
Old 03-26-2018, 10:04 AM   #16
68Stepbed
Registered User
 
68Stepbed's Avatar
 
Join Date: Mar 2005
Location: 10-Uh-See
Posts: 5,609
Re: Disc conversion kit from Captain Fab /w pics

I used the same kit. I went for the Centric slotted and cross drilled rotors to match my Wilwoods up front. Then, I used stock front truck calipers.

Rotor part numbers: CENTRIC 12766022R, 12766022L https://www.rockauto.com/en/catalog/...hub,rotor,1896

Calipers: https://www.rockauto.com/en/catalog/...b,caliper,1704




__________________
Matt

68 C10 stepside, LS1/700R4, TCI Engineering suspension system
68Stepbed is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:00 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com