Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
10-03-2003, 12:22 AM | #1 |
Registered User
Join Date: Nov 2000
Location: Valencia, CA
Posts: 96
|
Mounting Points - Factory Mirrors & Badges
My '72 Blazer is at the painter and I am going to have him mount factory mirrors (the small ones) and the "CST" badges on the door. I want to be certain that he puts them in the door in the correct factory positions.
Can any of you tell me exactly where the mounting points are on the doors? I looks like the edge of the mirror is just past the wind wing and that the "CST" is centered. Help! Mike- |
10-03-2003, 01:05 AM | #2 |
Blazerless:-(
Join Date: Jun 2003
Location: Olympia WA
Posts: 1,612
|
I am interest to know this also. I need to put my CST emblem on my doors. I have old doors that have the emblems on them, but I just am not to sure everything was original when I bought it. I can measure tomorrow and maybe someone can verify it.
|
10-03-2003, 01:32 AM | #3 |
Registered User
Join Date: Aug 2003
Location: Fort Worth Texas
Posts: 275
|
Ill take a pic and post it in the morning, if you like.
__________________
Joe Peters the HatGuy 72' K5 Highlander My Daily Driver http://www.pbhats.com/BLAZER/index.html |
10-03-2003, 09:27 AM | #4 |
Account Suspended
Join Date: Sep 2000
Posts: 3,991
|
1
|
10-03-2003, 09:28 AM | #5 |
Account Suspended
Join Date: Sep 2000
Posts: 3,991
|
2
|
10-04-2003, 12:54 AM | #6 |
Registered User
Join Date: May 2000
Location: Petrolia,Ontario,Canada but working in Port Huron,Mi.
Posts: 1,772
|
That factory assembly manual is great.But it leaves out some important measurements.
A measurement from the front of the door edge to the first hole would be VERY helpfull.You could then referance all the other measurements from there.
__________________
71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE |
10-04-2003, 07:57 AM | #7 |
Registered User
Join Date: Nov 2000
Location: Fullerton,NE
Posts: 380
|
I do know that the passenger side mirror sets slightly more rearward than the drivers side. Realized this when placing mine and looking at some completely original trucks.
__________________
69 short step 68 50th Anniversary Gold/ White lwb 72 2wd Blazer 63 Studebaker Avanti 85 Avanti 66 Studebaker Cruiser 49 Studebaker pickup 3-49 Studebaker 1 1/2 truck 94 White/ GMC coe (cabin hauler) 95 chev 2015 chev Duramax 2500 |
10-04-2003, 03:46 PM | #8 |
Registered User
Join Date: Nov 2000
Location: Valencia, CA
Posts: 96
|
If anyone can get the measurements from the door edge, that's be great. It'll be very helpful.
__________________
"If you choose not to decide . . . you still have made a choice." |
10-07-2003, 03:05 PM | #9 |
Registered User
Join Date: Jul 2002
Location: Vancouver, WA
Posts: 117
|
anyone have these measurements? This sure would be helpful for me too.
|
10-12-2003, 06:18 PM | #10 |
Registered User
Join Date: Nov 2000
Location: Valencia, CA
Posts: 96
|
If anyone could find the time to take some measurements I think a lot of us would benefit from it!
I know I would really appreciate it!!!! THANKS!
__________________
"If you choose not to decide . . . you still have made a choice." |
10-12-2003, 06:22 PM | #11 |
Senior Member
Join Date: Jul 2002
Location: Oak Harbor, WA
Posts: 709
|
Measurement
Well...mine measures 13 1/4 from the aft door edge.....but that is to the edge of the emblem...not the holes.....passenger side measures the same....Hope that helps....
__________________
Patch |
10-13-2003, 03:06 AM | #12 |
Registered User
Join Date: Nov 2000
Location: Valencia, CA
Posts: 96
|
Thanks Patch!
Any idea about the (small) factory mirrors? Is it true . . . are the driver and passenger mirrors mounted at different points on the door? Mike-
__________________
"If you choose not to decide . . . you still have made a choice." |
10-13-2003, 03:16 AM | #13 |
Registered User
Join Date: May 2000
Location: Petrolia,Ontario,Canada but working in Port Huron,Mi.
Posts: 1,772
|
It is true.
The drivers mirror is about 6" from the front door edge while the passenger mirror is about 8" from the door edge.. There was a post awhile back with exact measurements,I'll see if I can find it.
__________________
71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE |
10-13-2003, 03:21 AM | #14 |
Registered User
Join Date: Nov 2000
Location: Valencia, CA
Posts: 96
|
Thanks!!!! What a pal!!!!
Mike-
__________________
"If you choose not to decide . . . you still have made a choice." |
10-13-2003, 03:24 AM | #15 |
Registered User
Join Date: May 2000
Location: Petrolia,Ontario,Canada but working in Port Huron,Mi.
Posts: 1,772
|
I found it.It's the very last reply in the link.
http://67-72chevytrucks.com/vboard/s...hlight=mirrors It says: "The drivers side is 6 7/16" from the front of the door to the center of the front hole. Then 3 1/2" from the top of the door to the center of the front hole. The top of the top rear hole is 2 7/8" from the top of the door. The passenger side mirror is 8 1/4" from the center of the front hole to the front of the door. The top of the door to the center of both front and rear holes are the same as the drivers side." I'll be installing my passenger side mirror this week.:p
__________________
71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE |
10-13-2003, 03:28 AM | #16 |
Registered User
Join Date: Nov 2000
Location: Valencia, CA
Posts: 96
|
BobbyK . . . you da man!
Thanks for your help! Mike-
__________________
"If you choose not to decide . . . you still have made a choice." |
10-13-2003, 10:46 AM | #17 |
Account Suspended
Join Date: Sep 2000
Posts: 3,991
|
I wonder how many people go and put on the mirrors the same spot on both doors :p
|
Bookmarks |
|
|