Eaton H52 Axle Nut Tanged Washer? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DJ_Baar · 08-03-2016, 03:27 PM

I recently picked up a 1967 C20 with an Eaton H052 rear differential. I’m looking for replacement tanged washer that goes between the outer wheel bearing and the bearing nut? I can find a lot at Rock Auto but that and heard someone found for a different vehicle. I did find axle shaft seal and flange gasket. Also have not had luck with NAPA. Any assistance is appreciated, thank you in advance.

* Sorry I ask a LOT of questions, but have a LOT going on fixing-up this old truck I picked-up, it has been neglected for a long time, but worth the repairs. Just need to find some of the parts required. ;-)

R/
DJ

DJ_Baar · 08-03-2016, 07:45 PM

See link for detailed parts of Eaton H052.

http://www.66submarine.com/eatonffaxle/hubs.html

**special-K** · 08-04-2016, 05:22 AM

Is there one listed here that would work?

https://www.google.com/url?sa=t&rct=..._aPYGssxsAp0kA

DJ_Baar · 08-04-2016, 05:40 AM

Thank you Tim.

I found this, (with a little help from my Friends at work)
http://m.ebay.com/itm/New-Genuine-GM...-/181951185713

I'm on the right track. That Eaton H052 is a HD rear end and worth keeping - as long as I can get parts.

R/
DJ

08-03-2016, 03:27 PM	#1
DJ_Baar Registered User Join Date: Jul 2016 Location: New Orleans Posts: 362	Eaton H52 Axle Nut Tanged Washer? I recently picked up a 1967 C20 with an Eaton H052 rear differential. I’m looking for replacement tanged washer that goes between the outer wheel bearing and the bearing nut? I can find a lot at Rock Auto but that and heard someone found for a different vehicle. I did find axle shaft seal and flange gasket. Also have not had luck with NAPA. Any assistance is appreciated, thank you in advance. * Sorry I ask a LOT of questions, but have a LOT going on fixing-up this old truck I picked-up, it has been neglected for a long time, but worth the repairs. Just need to find some of the parts required. ;-) R/ DJ

08-03-2016, 07:45 PM	#2
DJ_Baar Registered User Join Date: Jul 2016 Location: New Orleans Posts: 362	Re: Eaton H52 Axle Nut Tanged Washer? See link for detailed parts of Eaton H052. http://www.66submarine.com/eatonffaxle/hubs.html

08-04-2016, 05:22 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Eaton H52 Axle Nut Tanged Washer? Is there one listed here that would work? https://www.google.com/url?sa=t&rct=..._aPYGssxsAp0kA __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-04-2016, 05:40 AM	#4
DJ_Baar Registered User Join Date: Jul 2016 Location: New Orleans Posts: 362	Re: Eaton H52 Axle Nut Tanged Washer? Thank you Tim. I found this, (with a little help from my Friends at work) http://m.ebay.com/itm/New-Genuine-GM...-/181951185713 I'm on the right track. That Eaton H052 is a HD rear end and worth keeping - as long as I can get parts. R/ DJ



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.