WA '67 GMC Chassis-Eng-Trans - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**PICKMUP** · 08-20-2016, 01:29 PM

Rolling chassis w/eng core & TH400 trans: $200
We are parting. What would you like?

*randy500* · 08-20-2016, 02:22 PM

Frank, do you have a good used TH400?

**PICKMUP** · 08-20-2016, 04:19 PM

Quote:

Originally Posted by randy500

Frank, do you have a good used TH400?

You can have this one: $100 as is.

**nbrfd007** · 08-20-2016, 06:39 PM

Power steering setup pump, brackets, pulleys

**PICKMUP** · 08-20-2016, 08:37 PM

Quote:

Originally Posted by nbrfd007

Power steering setup pump, brackets, pulleys

$75 Shipped...............

**nbrfd007** · 08-20-2016, 09:31 PM

Quote:

Originally Posted by PICKMUP

$75 Shipped...............

Great! Thank you, I will Take them. Let me know how to pay.
Thank you,
Tim

**nbrfd007** · 08-22-2016, 05:23 PM

Quote:

Originally Posted by PICKMUP

$75 Shipped...............

Payment sent.
Thank you,
Tim

**chewychevy67** · 08-21-2016, 12:23 PM

If you do take the engine apart I would like the valve covers. I can have these shipped to a US address.

**PICKMUP** · 08-21-2016, 03:28 PM

Quote:

Originally Posted by chewychevy67

If you do take the engine apart I would like the valve covers. I can have these shipped to a US address.

Sure. Valve Covers: $20 + $20 S/H/INS

**PICKMUP** · 08-21-2016, 03:44 PM

Notice the nice exhaust manifolds. Matching pair with the "GMC" & casting #s clear. No cracks or broken parts. Really heavy, so: $100 pr shipped.

**chewychevy67** · 08-22-2016, 09:10 AM

Quote:

Originally Posted by PICKMUP

Sure. Valve Covers: $20 + $20 S/H/INS

Payment sent

**chewychevy67** · 08-21-2016, 03:39 PM

Sounds good I'll send you a PM

**Classic v6 GMC's** · 08-22-2016, 09:04 PM

Payment sent.
Thank you

**PICKMUP** · 08-29-2016, 09:50 PM

Quote:

Originally Posted by Classic v6 GMC's

Payment sent.
Thank you

Pulled most of the parts today. Will pull carb & switch tomorrow.

**Classic v6 GMC's** · 08-29-2016, 10:08 PM

Quote:

Originally Posted by PICKMUP

Pulled most of the parts today. Will pull carb & switch tomorrow.

Thank you

**PICKMUP** · 08-30-2016, 09:49 PM

I am packing parts now.
Tim I got your address & info on the PayPal form, so all is good, including your email---which will get you automatic tracking.
Andy, I don't seem to have any shipping info from your PP.
Rodney, there's nothing on your PP form either.
If you sent it by PM or some other way, I don't know where it is.
Please send it again...PM will do.
Thanks, Frank

**Classic v6 GMC's** · 08-30-2016, 10:08 PM

Quote:

Originally Posted by PICKMUP

I am packing parts now.
Tim I got your address & info on the PayPal form, so all is good, including your email---which will get you automatic tracking.
Andy, I don't seem to have any shipping info from your PP.
Rodney, there's nothing on your PP form either.
If you sent it by PM or some other way, I don't know where it is.
Please send it again...PM will do.
Thanks, Frank

PM'd shipping info

**60-66** · 08-31-2016, 01:34 PM

What rear end does it have ? 44 or 60 ?

**Classic v6 GMC's** · 08-31-2016, 09:07 PM

Quote:

Originally Posted by 60-66

What rear end does it have ? 44 or 60 ?

Great question!!

**60-66** · 08-31-2016, 09:38 PM

I'm actually going to be in Roy Wa tomorrow visiting our Daughter who is stationed out there. Not sure how much time I will have though ?
Posted via Mobile Device

**PICKMUP** · 08-31-2016, 09:46 PM

Quote:

Originally Posted by 60-66

What rear end does it have ? 44 or 60 ?

I think it is a Dana 60.

**PICKMUP** · 08-31-2016, 09:48 PM

All parts shipped today...The automatic parts weighed 80 LBS!

**nbrfd007** · 09-01-2016, 10:10 PM

Quote:

Originally Posted by PICKMUP

All parts shipped today...The automatic parts weighed 80 LBS!

Thank you

**60-66** · 08-31-2016, 09:57 PM

Quote:

Originally Posted by PICKMUP

I think it is a Dana 60.

What would you want for that rear ?
Posted via Mobile Device

**PICKMUP** · 09-01-2016, 11:36 AM

Quote:

Originally Posted by 60-66

What would you want for that rear ?
Posted via Mobile Device

$100 You Pull...............................................Call me if you want it.

08-20-2016, 01:29 PM	#1
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,160	'67 GMC Chassis-Eng-Trans Rolling chassis w/eng core & TH400 trans: $200 We are parting. What would you like? Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170 Last edited by PICKMUP; 08-21-2016 at 11:14 PM.

08-20-2016, 02:22 PM	#2
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: '67 GMC Chassis-Eng-Trans Frank, do you have a good used TH400?

08-20-2016, 06:39 PM	#4
nbrfd007 Senior Member Join Date: Nov 2007 Location: New Blaine, Arkansas Posts: 751	Re: '67 GMC Chassis-Eng-Trans Power steering setup pump, brackets, pulleys

08-21-2016, 12:23 PM	#8
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,576	Re: '67 GMC Chassis-Eng-Trans If you do take the engine apart I would like the valve covers. I can have these shipped to a US address.

08-21-2016, 03:44 PM	#10
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,160	Re: '67 GMC Chassis-Eng-Trans Notice the nice exhaust manifolds. Matching pair with the "GMC" & casting #s clear. No cracks or broken parts. Really heavy, so: $100 pr shipped. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

08-21-2016, 03:39 PM	#12
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,576	Re: '67 GMC Chassis-Eng-Trans Sounds good I'll send you a PM

08-22-2016, 09:04 PM	#13
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: '67 GMC Chassis-Eng-Trans Payment sent. Thank you __________________ Current projects: 1966 Chevy Custom PS PB A/C BBW 283 v8 3 speed OD 1966 GMC Long Step 1966 GMC 3/4 ton Custom PS PB Sport trim 351 v6 1966 GMC 3/4 ton 4x4 Custom PB 305 v6 np435 1960 GMC Custom 1968 GMC 3/4 ton 4x4 Short Bed 1962 K20 Tow truck 1961 GMC Extended Suburban Panel and a few more

08-30-2016, 09:49 PM	#16
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,160	Re: '67 GMC Chassis-Eng-Trans I am packing parts now. Tim I got your address & info on the PayPal form, so all is good, including your email---which will get you automatic tracking. Andy, I don't seem to have any shipping info from your PP. Rodney, there's nothing on your PP form either. If you sent it by PM or some other way, I don't know where it is. Please send it again...PM will do. Thanks, Frank __________________ Email: frankeham@comcast.net Phone: 360-956-7170

08-31-2016, 01:34 PM	#18
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: '67 GMC Chassis-Eng-Trans What rear end does it have ? 44 or 60 ? __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

08-31-2016, 09:38 PM	#20
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: '67 GMC Chassis-Eng-Trans I'm actually going to be in Roy Wa tomorrow visiting our Daughter who is stationed out there. Not sure how much time I will have though ? Posted via Mobile Device __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

08-31-2016, 09:48 PM	#22
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,160	Re: '67 GMC Chassis-Eng-Trans All parts shipped today...The automatic parts weighed 80 LBS! __________________ Email: frankeham@comcast.net Phone: 360-956-7170



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.